Modeling of a Fuel Tank with an Air Compressor
Modeling of a Fuel Tank with an Air Compressor
It was observed that approximately 10% of the fuel remains trapped in the fuel tank unable to be used during operation of cars on fields with an elevation difference of up to 25 ̊ in x and y directions. To overcome this problem, a new type of fuel tank is designed which is based on the idea of implementing a movable partition in the fuel tank that will work to push the fuel within the tank towards the suction pump as the fuel in the tank is drained through car use. In this paper, the mathematical model of the fuel tank was found and the transfer function was given in terms of the amount of fluid inside the tank and the displacement of the partition. In addition, from the transfer function, the pole-zero map of the system and the root-locus were drawn. Finally, a PID controller was designed.
Keywords:
modeling, fuel tank air compressor, pid controller,
___
- J. Kim, “Fuel Storage Apparatus for Vehicle”. U.S Patent 7231933. 2007 https://www.google.com/patents/US7231933
- Gajic, Z. (2003) Linearization of Nonlinear Systems ,in Linear Dynamic Systems and Signals”. Prentice Hall. http://www.ece.rutgers.edu/~gajic/psfiles/linearization.pdf
- “Fuel Tanks and Connectors”. Tohatsu Outboards. Retrieved from http://www.tohatsu.com/accessories/fuel_tanks.html
- Lurie, M. V. (2008) Fundamentals of Mathematical Modeling of One-Dimensional Flows of Fluid and Gas in Pipelines, in Modeling of Oil Product and Gas Pipeline Transportation, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527626199.ch1
- Ansorge, R.; Sonar, T. (2009) Mathematical Models of Fluid Dynamics: Modeling, Theory, Basic Numerical Facts - An Introduction, -VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527627967
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 2016
- Yayıncı: Otomotiv Mühendisleri Derneği