A Novel Extended Expansion Engine Mechanism
A Novel Extended Expansion Engine Mechanism
Due to the increasing population and intense energy consumption, energy efficiency and efficient use of energy in the power units in the vehicle are important concepts for our earth. Particularly in hybrid engine vehicles produced in recent times, Atkinson (or Miller) internal combustion engines are preferred over conventional internal combustion engines. Atkinson's work from 1882 to the present day in many extended expansion engine mechanism design is presented. This paper deals with the design of a novel extended expansion engine mechanism that is intended to achieve trefoil hypotrochoid curve motion in the crankshaft connection using the planetary gear system. The kinematic equations related to the presented new crank-conrod mechanism have been obtained and compared with the conventional crank-conrod mechanism. As a result of the paper, the equations required for kinematic analysis were derived, and the kinematic data of the novel designed mechanism were compared and evaluated according to the data of the conventional system. As a result of this evaluation, it was shown that the desired extended expansion stroke could be obtained by using this mechanism and the parameters affecting the kinematic analysis were determined. However, it has been seen that by changing the critical design parameters, different piston path can be achieved with the novel designed mechanism.
Keywords:
Extended expansion, Planetary gear mechanism, Kinematics, Crank-conrod mechanism Trefoil hypotrochoid curve,
___
- Atkinson, J. (1886). USPTO, England.
- Atkinson, J. (1887). Patent No. US0367496A. USPTO, England.
- Zhao, J. (2017). Research and application of over-expansion cycle (Atkinson and Miller). Applied Energy, 185:300–319.
- Hou, S.-S. (2007). Comparison of performances of air standard Atkinson and Otto cycles with heat transfer considerations. Energy Conversion and Management, 48:1683-1690.
- Wang, Y., Zu, B., Xu, Y., Wang, Z., Liu, J., & Bingfeng, Z. (2016). Performance analysis of a Miller cycle engine by an indirect analysis method with sparking and knock in consideration. Energy Conversion and Management, 119:316-326.
- Al-Sarkhia, A., Jabera, J., & Probertb, S. (2006). Efficiency of a Miller engine. Applied Energy, 83:343–351.
- Zhu, S., Deng, K., Liu, S., & Qu, S. (2015). Comparative analysis and evaluation of turbocharged Dual and Miller cycles under different operating conditions. Energy, 93:75–87.
- S, S. W., Koga, H., & Kono, S. (2006). Research on extended expansion general purpose engine – theoretical analysis of multiple linkage system and improvement of thermal efficiency. SAE, 32-0101.
- Honda. (2011). Honda Exlink. Retrieved from http://world.honda.com/powerproducts-technology/exlink/
- Yamada, Y. (2004). Patent No. US6820577 B2. USPTO, Japan.
- Boretti, A., & Scalzo, J. (2011). Exploring the advantages of Atkinson effects in variable compression ratio turbo GDI engines. SAE, 01-0367.
- Kono, S., & H. Koga, S. W. (2010). Research on extended expansion general purpose engine-efficiency enhancement by natural gas operation. SAE, 32-0007.
- Gustafson, R. J. (2010). Patent No. US20110197834 A1. USPTO, England.
- Gonca, G., Sahin, B., & A., P. (2015). Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters. Applied Energy, 138:11-20.
- Fontana, G., & Galloni, E. (2009). Variable valve timing for fuel economy improvement in a small spark-ignition engine. Applied Energy, 86:96–105.
- Miller, R. (1957). Patent No. US2817322 A. USPTO, England.
- Gahruei, M. H., Jeshvaghani, H. S., Vahidi, S., & Chen, L. (2013). Mathematical modelling and comparison of air standard Dual and Dual-Atkinson cycles with friction, heat transfer and variable specific-heats of the working fluid. Applied Mathematical Modelling, 37:7319–7329.
- Salvatore De Maria. (1991). A Differential Atkinson engine. MSc Thesis: University of South Australia.
- Shojaeefard, M. H., & Keshavarz, M. (2015). Mathematical modelling of the complete thermodynamic cycle of a new Atkinson cycle gas engine. Applied Thermal Engineering, 91:866-874.
- Perez, L. M., Perez, S. A., & Perez, H. J. (2012). Patent No. US20120291755. USPTO, Venezuela.
- Honda. (2007). Honda Owner's Manual (GX240 • GX270 • GX340• GX390). Japan: Honda Motor Co., Ltd.
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 2016
- Yayıncı: Otomotiv Mühendisleri Derneği