Improving level measurement techniques and measurement accuracy in vehicle fuel tanks
Improving level measurement techniques and measurement accuracy in vehicle fuel tanks
Measuring the level and accurate transmission of the amount of fuel in vehicle fuel tanks are important in many ways. In vehicle warehouse designs, very different geometric shapes are encountered. Vehicle geometry and equipment placement cause warehouses to be produced in very different geometries. It is very important that information about the amount of fuel is transmitted to the driver in the most accurate way so that the driving safety and the car can travel safe distances. Shaking the fuel in the tank on a flat road, slope or off-road conditions may affect the display of the correct amount of fuel. In the study, the maximum and minimum production tolerance and geometry of the vehicle tanks, known as the mathematical model, the turbulence caused by acceleration of the float fuel measurement system in contact with the liquid placed in the tank, as well as the accuracy of the Up/Down movement of the level measurement float and the measurement of the fuel level as a result of the turbulence, were examined. The study focused on the oscillation of the measuring part on the float and the preventive geometries.
Keywords:
Fuel Tank, Sloshing, Level Measurement,
___
- http://www.inverterlc.net/15/04/2021.
- Özdoğan, M., Ölçme Tekniği Ders Notları, Ondokuz Mayıs Üniversitesi Makina Mühendisliği Bölümü, Samsun, 2021.
- Yumurtaci, M., & Yabanova, İ., Sıvı Seviye Sensörlerinin İncelenmesi ve Su Seviyesi Ölçümü Uygulaması, AKÜ FEMÜBİD, 18, 015202 (201- 207), 18, 201–207, 2018.
- Şahbazli, R., Su Tanklarinda Sivi Seviye Kontrol Sisteminin Geliştirilmesi, Yüksek Lisans Tezi, Adnan Menderes Üniversitesi Fen Bilimleri Enstitüsü, 2017.
- Topçu, E. E., Kiliç, E., & Çavdar, K., Bir Binek Araç Yakıt Tankının Çalkalanma Davranışının Deneysel İncelenmesi. Afyon Kocatepe University Journal of Sciences and Engineering, 17(1), 292–301, 2017.
- Keskin, M., & Saribaş, D., Container Level Measurement Methods and Testing an Ultrasonic Level Sensor. International Advanced Researches & Engineering Congress, November, 2017.
- Kiliç, E., Taşıt Yakıt Deposunda Çalkalanma Olayının Analizi, Yüksek Lisans Tezi, Uludağ Üniversitesi Fen Bilimleri Enstitüsü, 2015.
- Adiyan, A., Sıvı Seviye Kontrolü için SCADA Sistem Tasarımı, Yüksek Lisans Tezi, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü, 2012.
- Ceylan, İ., Mekanik Seviye Ölçüm Cihazı Tasarımı, Yüksek Lisans Tezi, Yıldız Teknik Üniversitesi Fen Bilimleri Enstitüsü, 2007.
- Artan, M., Soydemir, M. U., & Şahin, S., RM Based Hybrid Measurement System Design for Liquid Level Measurement with High Accuracy under Vibrating Case. Avrupa Bilim ve Teknoloji Dergisi Özel Sayı, 381-388, Ağustos 2020.
- https://www.gentekelektronik.com.tr/ultrasonik-seviye-sensoru/15/04/2021
- https://www.kloecknermetals.com/blog/comparing-6061-vs-6063-aluminum/15/04/2021.
- Başlangıç: 2012
- Yayıncı: Murat CİNİVİZ
Sayıdaki Diğer Makaleler
Improving level measurement techniques and measurement accuracy in vehicle fuel tanks
Öner ATALAY, Buse BELLİ, Oğuz SEZGİN
Effects of fly ash introduction on friction and wear characteristics of brake pads
An emission reduction method in liquid hydrogen powered fuel cell vehicles