Preparation Cobalt Ferrite–Silver Nanocomposite Via Green Chemistry Approach

Preparation Cobalt Ferrite–Silver Nanocomposite Via Green Chemistry Approach

Nanocomposites are formed by joining two or more materials, at least one of which must have a size in the nanometer range (1 nm -100 nm). In this study, cobalt ferrite-silver nanocomposite was prepared with a green synthesis approach. The aim was to combine the magnetic properties of cobalt-ferrite nanoparticles with both the antimicrobial and conductivity properties of silver nanoparticles. Thus, the prepared material can be used for biological, optical, electrical, and magnetic applications. Cobalt ferrite nanoparticles were prepared using the co-precipitation method. Silver nanostructures were incorporated into cobalt ferrite nanoparticles using waste grass extract. Scanning Electron Microscope (SEM), Infrared Spectrometer, UV-VIS Spectrometer, X-RAY Diffraction Spectrometer, Dynamic Light Scattering Technique were used for characterization studies.

___

  • M. Khatami, I. Sharifi, M.A. L. Nobre, N. Zafarnia, M. R. Aflatoonian Waste-grass-mediated green synthesis of silver nanoparticles and evaluation of their anticancer, antifungal and antibacterial activity, Green Chemistry Letters and Reviews, 11:2, (2018), 125-134.
  • D. Gingasu, et al., Soft chemistry routes for the preparation of Ag-CoFe2O4 nanocomposites, Ceram. Int., 43 (2017) 3284-3291.
Hacettepe Journal of Biology and Chemistry-Cover
  • ISSN: 2687-475X
  • Yayın Aralığı: 4
  • Başlangıç: 1972
  • Yayıncı: Hacettepe Üniversitesi, Fen Fakültesi
Sayıdaki Diğer Makaleler

Preparation Cobalt Ferrite–Silver Nanocomposite Via Green Chemistry Approach

Yeliz AKPINAR, Begüm AVCI

Comparison of Accelerated Exposure Tests on Organic Coatings via Electrochemical Means

Mehmet Bengi TAYSUN, Ali GİZLİ

Effect Of Ball Milling Time on Microstructural Properties of Mg/MgO

Yasemin YAHŞİ, Rasim İPEK

Eriyik Biriktirme Yöntemiyle Kenevirle Güçlendirilmiş Polilaktik Asit (PLA) Kompozit Filaman Üretimi

Alperen DOĞRU, Ayberk SÖZEN, Mehmet Özgür SEYDİBEYOĞLU, Gökdeniz NEŞER

Sürdürülebilir Gıda Ambalajlama Uygulamaları için Alkali Lignin ve Ozonla İşlem Görmüş Alkali Lignin Kullanımı

Ece SÖĞÜT, Atıf Can SEYDİM

High Pressure Resistant Aramid Fiber Reinforced Polymer Matrix Composite Pipe Design

Ali ARI, Ali BAYRAM

Assessing of photoluminescence and structural properties of Dy+3 doped cadmium tantalate phosphor

Lütfiye Feray GÜLERYÜZ

Microbial Transformation of 3,3-Dimethylcyclohexyl methyl ketone and Antimicrobial Evaluation

Özge ÖZŞEN BATUR, İsmail KIRAN, Kemal BAŞER, Fatih DEMİRCİ

Enjeksiyon Kalıplama ve Erimiş Filament Ekstrüzyonu (EFE) yöntemleri ile üretilen ahşap elyaf takviyeli PLA matris biyo-kompozitlerin karşılaştırılması

Alperen DOĞRU, Seçil YILANCIOĞLU, Görkem ÜLKÜ, Buket ŞENTÜRK TURAN, Mehmet Özgür SEYDİBEYOĞLU

Investigation of Dry Sliding Wear Behavior of Mg-SiC Alloys Produced by Powder Metallurgy Method

Yasemin YAHŞİ, Nail ASLAN, Lütfiye Feray GÜLERYÜZ, Rasim İPEK