Yasemin YAHŞİ, Rasim İPEK

Effect Of Ball Milling Time on Microstructural Properties of Mg/MgO

ISSN: 2687-475X
Yayın Aralığı: 4
Başlangıç: 1972
Yayıncı: Hacettepe Üniversitesi, Fen Fakültesi

Magnesium and its alloys are among the important research topics in terms of low density, large damping capacity, recyclability, and dimensional stability. The contact of Magnesium with oxygen easily causes the formation of Magnesium oxide. In this study, the Magnesium metal purchased in powder form was grinded by mechanical milling method for various hours. The effect of milling times on Mg/MgO powder composite formation was investigated. Scanning electron microscope (SEM) images of the samples were examined and Energy-dispersive X-ray spectroscopy (EDS) analysis were performed.

Keywords:

Magnesium Mechanical Milling, Microstructural Properties,

PDF

___

1. R. Neelameggham, Primary production of magnesium, Fundamentals of magnesium alloy metallurgy, Woodhead Publishing Limited, Philadelphia, USA, 2013.
2. Friedrich, H., and Schumann, S., 2001, Research for a ‘new age of magnesium’ in the automotive industry’, Journal of Materials Processing Technology, 117, 276–281.
3. B.L. Mordike, P. Lukáč, ‘Physical metallurgy’, in Magnesium Technology, Metallurgy, Design, Data, Applications, H.E. Friedrich, B.L. Mordike (eds), Springer-Verlag Berlin Heidelberg (2006) 63–105.
4. O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Raathel and M. Herrmann, Field Assisted Sintering Technology/ Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments, Advanced engıneerıng materıals (2014) 830-849.
5. M.H. Enayati, and F.A Mohamed, Application of mechanical alloying/milling for synthesis of nanocrystalline and amorphous materials, International Materials Reviews (2014) 59(7):394-416 pp.