___

• Dokuzuncu Kalkınma Planı, 2007-2013, “Ana
• Metal Sanayi”, Özel İhtisas Komisyonu
• Raporu, Ankara 2007.
• “Türk Demir Çelik Sektörü”, Türkiye DemirÇelik
• Üreticileri Derneği, 2009.
• (http://www.dcud.org.tr/dcs.aspx).
• Tetsuya, M., Hasegawa, K., Kawabe, H., “UHSS
• Sheets for Bodies, Reinforcement Parts, and Seat
• Frame Parts of Automobile Ultra High-Strength
• Steel Sheets Leading to Great Improvement in
• Crashworthiness” JFE Technical Report, Vol 4,
• -43, 2004.
• Manuel, F., Christoph, M.S., Colin, V., “A
• Regression on Climate Policy: The European
• Commission’s Legislation to Reduce CO2
• Emissions from Automobiles”, Transportation
• Research Part A, 2010.
• doi:10.1016/j.tra.2009.12.001
• Volkan, E.E., Arısoy, C.F., Kelami, Ş.,
• “Otomotiv Endüstrisinde Çelikten Vazgeçilebilir
• Mi?”, Metal Dünyası, Vol 125, 74-81, 2003.
• Ushioda, K., “Recent Developments in Steel
• Sheers”, Scandinavian Journal of Metallurgy,
• Vol 28, 33-39, 1999.
• SSAB Swedish Steel, “Highter Strength-Lower
• Weight: Educing the Body Weighty Using Extra
• and Ultra Hight Strength Steel”, GB 2000 Lygner
• Form& Tryck 2004.
• “21st Century Steel”, World Steel Assosiation,
• -2009 Update, 1-32, 2009.
• (http://www.worldsteel.org/pictures/publicationfil
• es/21st%20century%20steel.pdf
• Lindsay, B., Harry, E., “Automakers and
• Suppliers Accelerate Their Efforts to Reduce
• Vehicle Weight by Engineering Them for Greater
• Use of Lighter, Stronger Materials”, Mass
• Reduction Special Report, 16 March 2009.
• Akay, D., Kurt, M., “Otomobil Emniyet Kemeri
• Kullanılabilirlik Testi”, Gazi Üniversitesi.
• Mühendislik-Mimarlık Fakültesi Dergisi, Cilt
• , No 1, 183-191, 2006.
• AISI Market Development, “An Investment in
• Steel’s Future”, American Iron and Steel
• Institute, 2002– 2003, Progress Report 2003.
• “Advanced High-Strength Steels–A Collision
• Repair Perspective”, Technical Information for
• the Collision Industry, June 12, 2006. (www.icar.
• com)
• “New Study Finds Increased Use of Advanced
• High-Strength Steels Helps Decrease Overall
• Vehicle Weight”, Automotive Applications
• Council, 2010.
• (http://www.steel.org/AM/Template.cfm?Section
• =Press_Releases9&TEMPLATE=/CM/ContentD
• isplay.cfm&CONTENTID=32077)
• “Advanced High Strength Steel (AHSS)
• Application Guidelines”, World Auto Steel,
• Version 4.1, 1-171, 08 June 2009.
• (www.worldautosteel@org).
• Hayat, F., Demir, B., Acarer, M., Aslanlar, S.,
• “Effect of Weld Time and Weld Current on the
• Mechanical Properties of Resistance Spot
• Welded IF (DIN EN 10130–1999) Steel”,
• Kovove Materials, Vol 47, No 1, 11-17, 2009.
• Hayat, F., Demir, B., Aslanlar, S., “IF 7315
• Çeliklerinin Yapıştırmalı Nokta Direnç Kaynaklı
• Birleştirmelerinin İncelenmesi”, 14. Uluslararası
• Metalurji ve Malzeme Kongresi, İstanbul, 16-
• Ekim 2008.
• Hayat, F., Demir, B., Aslanlar, S., “Nokta Direnç
• Kaynak Süresinin IF 7114 Çeliği
• Birleştirmelerinin Mekanik Özelliklerine Etkisi”,
• IV. Demir Çelik Kongresi, Karabük, 243-250,
• -3 Kasım 2007.
• Hayat, F., Demir, B., Acarer, M., "0,067C ve
• ,74 Mn’lı Çift Fazlı Çeliklerin Mikroyapı-
• Dayanım İlişkisi ve Kırılma Davranışları",
• Teknoloji Dergisi, Cilt 10, Sayı 1, 111-120,
• -
• Speich, GR., “Dual Phase Steels”, Heat Treating,
• ASM Handbook, fifth prinnting, 424-429, 1997.
• Speich, GR., Miller, RL., “Mechanical Properties
• of Ferrit-Martensite Steels” In: Kott RA, Morris
• JW, editors, “Structure and Properties of
• Dual-Phase Steels”, New York: AIME, 1-45,
• -
• Erdoğan, M., “The Effect of New Ferrit Content
• on Tensile Fracture Behaviour of Dual Phase
• Steels”, Journal of Materials Science, Vol 37,
• No 17, 3623-3630, 2002.
• Erdoğan, M., Priestner, R., “Effect of Martensite
• Content, its Dispertion and Epitaxial Content on
• Bauschinger Behaviour of Dual Phase Steel”,
• Materials Science and Technology, Vol 15, No
• , 1273-1284, 1999.
• Kim, K.J. Chang, G.L., Sunghak L., “Effects of
• Martensite Morphology on Dynamic Torsional
• Behaviour in Dual Phase Steels”, Scripta
• Materialia, Vol 38, No 1, 27-32, 1997.
• Davies, R.G., “Influence of Martensite
• Composition and Content on The Properties of
• Dual-Phase Steels”, Metallurgical
• Transactions, Vol 18A, 671-679, 1978.
• The UltraLight Steel Auto Body Programme,
• “UltraLight Steel Auto Closures” Final Report,
• Porsche Engineering Services, Inc. May 2001.
• (www.ulsab-avc.org).
• Kayalı, E.S., Ensari, C., Silahtaroğlu, S., “Derin
• Çekme Kalitesindeki Saclarda Özellikleri
• Etkileyen Faktörler”, 3. Ulusal Metalürji
• Kongresi, ODTÜ, Ankara, 581-586. Aralık 1979.
• Öztürk, T., Bor, Ş., Atasoy, E., Alpas, T.,
• “Erdemir 6114 Saclarının Derin Çekme
• Özelliklerini Etkileyen Faktörler”, Doğa
• Mühendislik ve Çevre Dergisi, Vol 1, 318-322,
• -
• “New Study Finds Increased Use of Advanced
• Hıgh-Strength Steels Helps Decrease Overall
• Vehicle Weight”, American Iron and Steel
• Institute, 2009.
• “Environmental Case Study Automotive: an
• Advanced High-Strength Steel Family Car”,
• World Steel Association, 2006.
• (www.worldsteel.org).
• Corus Research, Dev.&Technology, Corporate
• Responsibility Report 2007/08.
• ArcelorMittal, “How Will We Achieve: Safe
• Sustainable Steel?”, Corporate Responsibility
• Report, 2008.
• Flat Carbon Europe, “Client Magazine”,
• ArcelorMittal, September, 2007.
• (www.arcelormittal.com/fce/repository/Update/E
• N_UpdateFCE_aug07.pdf)
• “Arcelor Body Concept”, Arcelor Auto, Arcelor
• Group.
• “50 Years as Steel Supplier to Volvo”, Corus
• Research, No. 1, February 2007.
• (http://www.productrange.nl/uploadz/m20071026
• pdf)
• Basuki, A., Aernoudt, E., “Influence of Rolling
• of TRIP Steel in the Intercritical Region on the
• Stability of Retained Austenite”, Journal of
• Materials Processing Technology, Vol 89, No
• , 37-43, 1999.
• Furne´mont, Q., Kempf, M., Jacques, P.J.,
• Gorken, M., Delannay, F., “On the Measurement
• of the Nanohardness of the Constitutive Phases of
• TRIP-assisted Multiphase Steels”, Materials
• Science and Engineering A, Vol 328, No 1, 26–
• , 2002.
• Berrahmoune, M.R., Berveiller, S., Inal, K.,
• Moulin, A., Patoor, E., “Analysis of the
• Martensitic Transformation at Various Scales in
• TRIP Steel”, Materials Science and
• Engineering A, Vol 378, No 1, 304–307, 2004.
• Hutchinson, B., “Texture in Hot Rolled Austenite
• and Resulting Transformation Products”,
• Materials Science and Engineering A, Vol 257,
• No 1, 9–17, 1998.
• Zhao, L., Dijk, N.H., Brück, E., Sietsma, J.,
• Zwaag, S., “Magnetic and X-ray Diffraction
• Measurements for the Determination of Retained
• Austenite in TRIP steels”, Materials Science
• and Engineering A, Vol 313, No 1, 145–152,
• -
• Li, L., Wollants, P., He, Y.L., Coomman, B.C.,
• Wei X.C., Xu, Z.Y., “Review and Prospect of
• High Strength Low Alloy TRIP Steel”, Acta
• Metallurgica Sinica (English Letters) Vo1 16,
• No 6, 457-465, 2003.
• Hoon, H., Kim, S.B., Song, J.H., and Lim, J.H.,
• “Dynamic Tensile Characteristics of TRIP-type
• and DP-type Steel Sheets for an Auto-Body”,
• International Journal of Mechanical Sciences,
• Vol 50, No 5, 918–931, 2008.
• Dan, W.J., Li, S.H., Zhang, W.G., Lin, Z.Q.,
• “The Effect of Strain-Induced Martensitic
• Transformation on Mechanical Properties of
• TRIP Steel”, Materials and Design, Vol 29, No
• , 604-612, 2008.
• Yinghui, Z., Yonli, M., Yonglin, K., Hao, Y.,
• Mechanical Properties and Microstructure of
• TRIP Steels Produced Using TSCR Process”,
• Journal of University of Science and
• Technology, Beijing Vol 13, No 5, 416-421,
• -
• WU, D., Zhuang, L., Hui-sheng, L., “Effect of
• Controlled Cooling After Hot Rolling on
• Mechanical Properties of Hot Rolled TRIP
• Steel”, Journal of Iron and Steel Research,
• International, Vol 15, No 2, 65-70, 2008.
• Koh-Ichi, S., Toshiki, M., Shun-Ichi H., Yoichi,
• M., “Formability of Nb Bearing Ultra High-
• Strength TRIP-aided Sheet Steels”, Journal of
• Materials Processing Technology, Vol 177, No
• , 390–395, 2006.
• Skoalova, L., Divišová, R., Jandová, D.,
• “Thermo-Mechanical Processing of Low-Alloy
• TRIP steel”, Journal of Materials Processing
• Technology, Vol 175, No 1, 387–392, 2006.
• Wen, S., Lin L., Cooman, B.C.D., Wollants, P.,
• Yang, C., “Thermal Stability of Retained
• Austenite in TRIP Steel After Different
• Treatments”, Journal of Iron and Steel
• Research, International, Vol 15, No 1, 61-64,
• -
• Zhuang, L., Di, W., Rong, H., “Austempering of
• Hot Rolled Si-Mn TRIP Steels”, Journal of Iron
• and Steel Research, International, Vol 13, No
• , 41-46, 2006.
• Xiaodong, Z., Zhaohui, M., Wang L., “Current
• Status of Advanced High Strength Steel for Automaking
• and its Development in Baosteel”,
• Baosteel Research Institute, Shanghai, 201900,
• -8, China.
• Chatterjee, S., “Transformations in TRIP-assisted
• Steels: Microstructure and Properties”, Darwin
• College, University of Cambridge, November,
• -
• Hanzaki, AZ., Hodgson PD., Yue, S., “Hot
• Deformation Characteristics of Si-Mn TRIP
• Steels With and Without Nb Microalloy
• Additions”, ISIJ International, Vol 35, No 4,
• -330, 1995.
• La-Neuve, P. Jacques, PhD Thesis, Universite´
• Catholique de Louvain, Belgium, 1998.
• Basuki, A., and Aernoudt, E., “Effect of
• Deformation in the Intercritical Area on the Grain
• Refinement of Retained Austenite of 0.4C TRIP
• Steel”, Scripta Materialia, Vol 40, No 9, 1003–
• , 1999.
• Cooman, B.C.D., “Structure–Properties
• Relationship in TRIP Steels Containing Carbide-
• Free Bainite”, Current Opinion in Solid State and Materials Science, Vol 8, No 4, 285–303,
• -
• Oliver, S. Jones, T.B., Fourlaris, G., “Dual Phase
• Versus TRIP Strip Steels: Microstructural
• Changes As a Consequence of Quasi-Static and
• Dynamic Tensile Testing”, Materials
• Characterization, Vol 58, No 4, 390-400, 2007.
• Hilditch, T.B., Speer, J.G., Matlock, D.K.,
• “Effect of Susceptibility to Interfacial Fracture on
• Fatigue Properties of Spot-Welded High Strength
• Sheet Steel”, Materials and Design, Vol 28, No
• , 2566–2576, 2007.
• Liu, Q., Tang, D., Jiang, H., Liu, R., Tang, X.,
• “Research and Development of 780 MPa Cold
• Rolling TRIP-aided Steel”, International
• Journal of Minerals, Metallurgy and
• Materials, Vol 16, No 4, 399-406, 2009.
• “Material assessment for crash”, Corus
• Research, MEP/02-2002,
• (http://www.corusautomotive.com/file_source/St
• aticFiles/Microsites/Automotive/Publications/Aut
• o%20Apps%20PDFs/2008%20PDFs/Material%2
• assessment%20for%20crash_20071101.pdf)
• Uenishi, A., Kuriyama, Y., Takahashi, M.,
• “High-Strength Steel Sheets Offering High
• Impact Energy-Absorbing Capacity”, Nippon
• Steel Technical Report, (Japan), 81, 17, 2000.
• Takahashi, M., Kawano, O., Hayashida, T.,
• Okamoto, R., Taniguchi, H., “High Strength Hot-
• Rolled Steel Sheets for Automobiles”, Nippon
• Steel Technical Report, 88, 2-7, 2003.
• Sakuma, Y., Kimura, N., Itami, A., “Next-
• Generation High-Strength Sheet Steel Utilizing
• Transformation-Induced Plasticity (TRIP)
• Effect”, Nippon Steel Technical Report, no.64
• March 1995.
• Parish, C.M., “Fundamental Study of Phase
• Transformations in Si-Al TRIP Steels”, Bs in
• Material Science and Engineering A, NCS
• University, 2000.
• Andrew, K.W., “Empirical Formulae for the
• Calculation of Some Transformation
• Temperatures”, Journal of the Iron and Steel
• Institute, Vol 203, 721-727, 1965.
• Topbaş, M.A., “Isıl İşlemler”, Prestij Yayıncılık,
• Yıldız Teknik Üniversitesi, İstanbul, 1993.
• Wasilkowska, P., Tsipouridis, E.A., Werner, A.,
• Pichler, S., Traint “Microstructure and Tensile
• Behaviour of Cold-Rolled TRIP-aided Steels”,
• Journal of Materials Processing Technology,
• Vol 157–158, No 1, 633–636, 2004.
• Wei, X., Renyu, F., Li L., “Tensile Deformation
• Behavior of Cold-Rolled TRIP-aided Steels Over
• Large Range of Strain Rates”, Materials Science
• and Engineering A, Vol 465, No 1, 260–266,
• -
• Kim, S.J., Chang G.L., Lee, T.H., Oh, C.S.,
• “Effect of Cu, Cr and Ni on Mechanical
• Properties of 0.15 wt.% C TRIP-aided Cold
• Rolled Steels”, Scripta Materialia, Vol 48, Vol
• , 539–544, 2003.
• “Top Steel Producer Campanies”, World Steel
• Assosiation,2009.
• (http://www.worldsteel.org/?action=programs&id
• =53)