___

• Sirong, Y., Dongcheng, L., Kim, N.,
• “Microstructure evolution of SIMA processed
• AA2024”. Materials Science and Engineering
• A; 420, 165–170, 2006.
• Flemings, M.C., “Behaviour of metal alloys in the
• semisolid state”, Metallurgical and Materials
• Transactions A; 22, 957-981, 1991.
• Fan, Z., Semisolid Metal Processing,
• International Materials Reviews; 47 (2), 49-85,
• -
• Kirkwood, D.H., “Semisolid metal processing”,
• International Materials Reviews; 39 (5), 173-
• , 1994.
• Tzimas, E. and Zavaliangos, A., A comparative
• characterization of near-equiaxed microstructures
• as produced by spray casting,
• magnetohydrodynamic casting and the stress
• induced, melt activated process, Materials
• Science and Engineering A; A289, 217-227,
• -
• Choi, C., Park, H. J. Microstructural
• characteristics of aluminum 2024 by cold working
• in the SIMA process, Journal of Materials
• Processing Technology; 82, 107-116, 1998 .
• Atkinson, H.V., “Modelling the semisolid
• processing of metallic alloys”, Progress in
• Materials Science, 50, 341-412, 2005.
• Atkinson, H.V., Liu, D., “Microstructural
• coarsening of semi-solid aluminium alloys”,
• Materials Science and Engineering A, 496, 439–
• , 2008.
• Birol, Y., “Thermomechanical processing of
• AA6061 billets for semi-solid forming”,
• International Journal of Materials Research;
• , 53-59, 2007.
• Önsel M., Birol Y., Bozkurt U., Kubilay C., ve
• Altıntaş S., “Alüminyum alaşımlarında “SIMA”
• prosesiyle tiksotropik yapı elde edilmesi”,
• Uluslararası Metalurji ve Malzeme
• Kongresi, 991-998, 2005, İstanbul, Türkiye.
• Birol, Y., Çakır, O. ve Alageyik, F., “AA6061
• alaşımında tiksotropik yapı elde edilmesi”,
• Uluslararası Metalurji ve Malzeme
• Kongresi,1704-1712, 9-11 Kasım 2006, İstanbul,
• Türkiye.
• Birol, Y., “Production of AA 6082 feedstock for
• forming in the semi solid state”, Materials
• Science Forum, 519-521:1919-1924, 2006.
• Guo, H., Yang, X., Zhang, M., “Microstructure
• characteristics and mechanical properties of
• rheoformed wrought aluminum alloy 2024”, Trans. Nonferrous Met. Soc. China; 18, 555-
• , 2008.
• Fan, Z., “Development of the rheo-diecasting
• process for magnesium alloys”, Materials Science
• and Engineering A, 413/414, 72-78, 2005.
• Guo, H., YANG, X., “Preparation of semi-solid
• slurry containing fine and globular particles for
• wrought aluminum alloy 2024” Trans.
• Nonferrous Met. Soc. China 17, 799-804, 2007.
• Yurko, J., Flemings, M.C., Martinez R.A., “Semisolid
• rheocasting (SSR)-Increasing the capabilities
• of die casting”, J. Die Casting Engineer, 2004(1):
• -52.
• Saklakoglu, N., Saklakoglu, I. E., Tanoglu, M.,
• Oztas, O., Cubukcuoglu, O., “Mechanical
• properties and microstructural evaluation of
• AA5013 aluminum alloy treated in the semi-solid
• state by SIMA process”, Journal of Materials
• Processing Technology; 48, 103-107, 2004.
• Türkeli, A., Akbaş, N., “Formation of Non-
• Dendritic Structure in 7075 Wrought Aluminum
• Alloy by SIMA Process and Effect of Heat
• Treatment”, Proceedings of Fourth
• International Conference on the Semi-Solid
• Processing of Alloys and Composites, England,
• UK, 71-74, 1996.
• Wang, S., Li, Y., Chen, W., Zheng, X.,
• “Microstructure Evolution f Semi-Solid 2024
• Alloy During Two-Step Reheating Process”,
• Trans. Nonferrous Met. Soc. China; 18,784–
• , 2008.
• Jung, H.K., Kang, C.G., “Reheating process of
• cast and wrought aluminum alloys for
• thixoforging and their globularization
• mechanism”, Journal of Materials Processing
• Technology, 104 244-253, 2000.
• Liu, D., Atkinson, H.V., Higginson, R.L.,
• “Disagglomeration in thixoformed wrought
• aluminium alloy 2014” Materials Science and
• Engineering A, 392, 73–80, 2005.
• Freitas, E.R., Ferracini E., Ferrante, M.,
• “Microstructure and rheology of an AA2024
• aluminium alloy in the semi-solid state, and
• mechanical properties of a back-extruded part”,
• Journal of Materials Processing Technology,
• , 241–249, 2004.
• Zhang, L,. Liu, Y.B,. Cao, Z.Y., Zhang, Y.F,.
• Zhang, Q.Q., “Effects of isothermal process
• parameters on the microstructure of semisolid
• AZ91D alloy produced by SIMA” Journal of
• Materials Processing Technology, 209, 792–797,
• -
• Jiang, H., Mi, Z., Tang, D., Li, M.,
• “Microstructure evolution of Al-4Cu-Mg alloy
• during semi-solid treatment”, Journal of
• University of Science and Technology Beijing
• (Materials), 14 (2), 151-156, 2007.
• Dong, J., Cui, J.Z., Le, Q.C., Lu, G.M., “Liquidus
• semi-continuous casting, reheating and
• thixoforming of a wrought aluminum alloy 7075”,
• Materials Science and Engineering A, 345, 234-
• , 2003.