___

• McLean, M., Directionally Solidified Materials
• for High Temperature Service, The Metals
• Society, London, 3-22, 1983.
• Brown, A.B., Kim, H., “Modelling of Directional
• Solidification: From Scheil to Detailed Numerical
• Simulation”, Journal of Crystal Growth, Cilt
• , 50-65, 1991.
• Pratt, R.A., Grugel, R.N., “Microstructural Response
• to Controlled Accelerations During the Directional
• Solidification of Al-6 wt.% Si alloys”, Materials
• Characterization, Cilt 31, 225-231, 1993.
• Kurz, W., Fisher, D.J., Fundamentals of
• Solidification, Trans Tech Publications,
• Switzerland, 2-44, 1992.
• Khan, S., Directional Solidification of
• Aluminium-Silicon Eutectic Alloys, Doktora
• Tezi, University of Manchester Materials Science
• Center, England, 5-78, 1990.
• Ying, T., Segregation Reduction In Bridgman
• Crystal Growth, Doktora Tezi, University
• Wisconsin-Madison, USA, 1-38, 1997.
• Flemings, M.C., Solidification Processing,
• McGraw-Hill Inc., New York, 5-50, 1974.
• Mazumder, P., Tranport Processes in
• Directional Solidification and Their Effects on
• Microsturucture Development, Doktora Tezi,
• Mechanical Engineering Iowa State University,
• USA, 1-6, 1999.
• Hunt, J.D. and Lu, S., “Numerical modeling of
• cellular/dendritic array growth: Spacing and
• structure predictions”, Metalurgical Materials
• Trans. A, Cilt 27A, 611, 1996.
• Tewari, S.N. and Shah, R., “Effects of Electromagnetic Vibration on the Macrosegregation
• of 7075Al Alloy by Semi-continuous
• Casting”, Metalurgical Materials Trans. A, Cilt
• , 1353-1362, 1996.
• Gandin, Ch. A., “From Constrained to
• Unconstrained Growth During Directional
• Solidification”, Acta Materialia, Cilt 48, 2483-
• , 2000.
• Rousset, P., Rappaz, M., Hannart, B., “Modeling
• of Inverse segregation and Porosity Formation in
• Directionally Solidified Aluminum Alloys”,
• Metallurgical and Materials Transactions A,
• Cilt 26A, 2349-2358, 1995.
• Henry, S., Minghetti, T., Rappaz, M., “Dendrite
• Growth Morphologies in Aluminium Alloys”,
• Acta Materialia, Cilt 46, 6431-6443, 1998.
• Nakae, H., Song, K., Fujii, H., “New Application
• of Unidirectional Solidification Method for
• Observation of Interfacial Morphology of Al-Si
• and Al-Si-Sr Alloys”, Materials Transactions,
• JIM, Cilt 33, 1051-1056, 1992.
• Yılmaz, F., Elliott, R., “The Microstructure and
• Mechanical Properties of Unidirectionally
• Solidified Al-Si Alloys”, Journal of Materials
• Science, Cilt 24, 2065-2070, 1989.
• Su, R-J., Ruel, A.O., Wartan, A.J.,
• “Microstructural and Compositional Transients
• During Accelerated Solidification of Al-4.5 wt pct
• Cu”, Metallurgical and Materials Transactions
• A, Cilt 29A, 2375-2381, 1998.
• Ostrogorsky, A.G., “Single-Crystal Growth by the
• Submerged Heater Method”, Mechanical
• Engineering Department Columbia University
• New York, USA, Cilt 1, 463-464, 1990.
• Quyang, H., Multi-Level Simulation and
• Modeling of Vertical Bridgman Growth of
• Single Crystals And Solidification of Binary
• Alloys, Doktora Tezi, Mechanics and Engineering
• Science, China, 34-39, 1996.
• Staub, F., Braun, R., Geiger, T., “Investigations in
• Connection with the Manufacture of Gas Turbine
• Blades with Unidirectionally Solidified Structure”,
• Sulzer Research, 3-13, 1972.
• Xie, F.Y., Kraft, T., Zuo, Y., Moon, C.H., Chang,
• Y.A., “Microstructure and Macrosegregation in
• Al-Rich Al-Cu-Mg Alloys”, Acta Materialia, Cilt
• , 489-500, 1999.
• Çadırlı, E.,Ülgen, A., Gündüz, M., “Directional
• Solidification of the Aluminium-Copper Eutectic
• Alloy”, Materials Transactions, JIM, Cilt 40,
• -996, 1999.
• Formaro, O., Palacio, H.A., “Primary Spacing
• Evolution During Directional Solidification of Al-
• 5%Cu”, Scripta Metallurgica et Materialia,
• Cilt 31,1265-1270, 1994.
• Xinyan, Y., Xie, F., Chu, M., Chang, Y.A.,
• “Microsegregation in Al-4.5Cu wt.% Alloy:
• Experimental Investigation and Numerical
• Modeling”, Materials Science and Engineering
• A, Cilt A302, 268-274, 2001.
• Tüzünalp, K.K., Alüminyum Alaşımlarının
• Yönlü Katılaşması ve Süreç Parametrelerinin
• İrdelenmesi, Doktora Tezi, Gazi Üniversitesi Fen
• Bilimleri Enstitüsü, Ankara, 5-90, 2002.
• Çengel, Y.A., Boles, M.A., Thermodynamics,
• An Engineering Approach, McGraw-Hill, New
• York, 1989.