___

• Choi, H., Lee, J. ve Park, H.,“Aerodynamics of heavy vehicles”, Annual Review of Fluid Mechanics, Cilt 46,441–468, 2014.
• Hucho, W.H., Aerodynamics of road vehicles, SAE International Press, 1998.
• Ahmed, S.R., Ramm, G. ve Faltin,G.,“Some salient features of the time averaged ground vehicle wake”, SAE Paper 840300, 1984.
• Önder, E.T. ve Başlamışlı, S. C.,“ Torque distribution based on central differential mechanism control for lateral handling stability”, Journal of the Faculty of Engineering and Architecture of Gazi University, Cilt 31 (3), 491-500, 2016..
• Lienhart, H.ve Becker, S.,“Flow and turbulente structure in the wake of a simplified car model”, SAE Paper 2003-01-0656, 2003.
• Venning,J.,Jacono, D. L., Burton,D., ve Sheridan, J.,“The effect of aspect ratio on the wake of the Ahmed body”, Expiments in Fluids,Cilt 56, 126, 2015.
• Volpe, R., Da Silva, A., Ferrand, V.ve Le Moyne, M.,“Experimental and Numerical Validation of a Wind Gust Facility”, Journal of Fluids Engineering, Cilt 135(1), FE-12-1254, 2013.
• Grandemange, M., Cadot, O.,Courbois, A.,Herbert, V.,Ricot, D.,Ruizb, T. ve Vigneron, R.,“A study of wake effects on the drag of Ahmed׳s squareback model at the industrial scale”, Journal of Wind Engineering and Industrial Aerodynamics, Cilt, 145, 282–291, 2015.
• Bayraktar I, Landman D, ve Baysal O.,“Experimental and computational investigation of Ahmed body for ground vehicle aerodynamics”,SAE Paper 2001-01-2742, 2001.
• Basara B. Case 9.4: flow around a simplified car body (Ahmed body). In: 10thjoint ERCOFTAC (SIG-15)-IAHR-QNET/CFD workshop on refined turbulencemodeling, University of Poitiers, France, October 10–11, 2002.
• McNally, J., Fernandez, E., Robertson, G., Kumar, R.,Taira, K., Alvi, F., Yamaguchi, Y.ve Murayama, K.,“Drag reduction on a flat-back ground vehicle with active flow control”, Journal of Wind Engineering and Industrial Aerodynamics,Cilt 145,292–303, 2015.
• Thacker, A., Aubrun,S., ve Leroy, A. “Effects of suppressing the 3D separation on the rear slant on the flow structures around an Ahmed body”, Journal of Wind Engineering and Industrial Aerodynamics,Cilt 107–108, 237–243,2012.
• Joseph, P.,Amandolese, X.,Edouard ve Aider, J.,“Flow control using MEMS pulsed micro-jets on the Ahmed body”, Experimentd in Fluids, Cilt 54,1442, 2013.
• Guilmineau,E.,“Computational study of flow around a simplified car body”,Journal of Wind Engineering and Industrial Aerodynamics, Cilt 96, 1207–1217, 2008.
• Guilmineau,E., Chikhaoui,O., ve Visonneau,M.,“Cross wind effects on a simplified car model by a DES approach”, Computers and Fluids, Cilt 78, 29–40, 2013.
• FLUENT Theory Guide14.0, 2011.
• Benim, A.C., Nahavandi, A. ve Syed, K.J., URANS and LES analysis of turbulent swirling flows, Progress in Computational Fluid Dynamics, Cilt 5 (8), 444-454, 2005.
• Krajnovic, S.ve Davidson, L.,“Large-Eddy Simulation of the Flow Around Simplified Car Model”, SAE Paper No. 2004-01-0227, 2004.
• Ashton, N.ve Revell, A.,“Key factors in the use of DDES for the flow around a simplified car”, International Journal of Heat and Fluid Flow,Cilt 54, 236–249, 2015.
• Tunay, T., Sahin, B. ve Ozbolat, V., “Effects of rear slant angles on the flow characteristics of Ahmed body”, Experimental Thermal and Fluid Science, Cilt 57, 165-176, 2014.
• Fares, E.,“Unsteady flow simulation of the Ahmed reference body using a lattice Boltzmann approach”, Computers and Fluids,Cilt 35, 940–950, 2006.