___

• Özdemir, Ö., Usta, M., Bindal, C.,Üçışık, A.H., “Hard iron boride (Fe2B) on 99.97wt% pure iron”, Vacuum 80, 1391-1395, 2006.
• Casteletti, L.C., Lombardi, A.N., Totten, G.E., “Boriding”, Encyclopedia of Tribology, Wang, Q.J., Chung, Y.W., Springer, USA, 249-254, 2013.
• Şeşen, F.E., Özgen, Ö.S., “A study on electrothermochemical boronizing of an IF steel”, Journal of Engineering and Natural Sciences 32, 334-347, 2014.
• Castro, G.A. R., Tinoco, L.F.J., Mendez, I.A.V., Amador, A.M.,Gutierrez, H.M., Silva, I.C., “Damage mechanisms in AISI 304 borided steel:scratch and daimler-benz adhesion tests”, Materials Research18(6), 1346-1353, 2015.
• Şen, S., Şen, U., Bindal, C., “The growth kinetics of borides formed on boronized AISI 4140 steel”, Vacuum 77, 195-202, 2005.
• Şen, U., Şen, S., Yılmaz, F., “An Evaluation of some properties of borides deposited on boronized ductile iron”, Journal of Materials Processing Technology 148, 1-7,2004.
• Mu, D., Shen, B., “The kinetics and dry-sliding wear properties of boronized gray cast iron”, Advances in Materials Science and Engineering, http://dx.doi.org/10.1155/2013/751971, article ID 751971,7 pages, 2013.
• Gül, F., Çetin, M., “Küresel Grafitli Dökme Demirin Adhesif Aşınma Davranışı ve Sürtünme Kuvveti Üzerine Borlama Süresinin Etkisi”, 6th International Advanced Technologies Symposium, Elazığ/Turkey, 303-306,2011.
• Meriç, C., Şahin, S., Backır, B., Köksal, N.S., “Investigation of the boronizing effect on the abrasive wear behavior in cast irons”, Materials and Design 27, 751-757, 2006.
• Keddam, M., Azouani, O., Allaoui, O., Sehisseh, A., “Characterization and boriding kinetics of EN-GJS-400-15 cast iron”, Journees Annuelles de la SF2M 2015, Materiaux et conversion d’energie, Posters, Paris, 26-28 Octobre 2015.
• Şen, U., Şen S., Köksal, S., Yılmaz, F., “Fracture toughness of borides formed on boronized uctile iron”, Materials and Design 26, 175-179, 2005.
• Şen, U., Şen, S., Yılmaz, F., “Structural characterization of boride layer on boronized ductile irons”, Surface and Coatings Technology 176, 222-228, 2004.
• Kayalı, Y., Yalçın, Y., “The effects of boro-tempering heat treatment on microstructural properties of ductile iron”, Materials and Design 32, 1414-1419, 2011.
• Gül, F., “Ferritik-Perlitik Küresel Grafitli Dökme Demirin Adhesif Aşınma Dayanımı Üzerinde Borlama Yüzey İşleminin Etkisi”, Gazi Univ. Müh. Mim. Fak. Der., Cilt 25, No2, 389-395, 2010.
• Şen, U., Şen, S., Yılmaz, F., “Effect of copper on boride layer of boronized ductile cast irons”, Vacuum 72, 199-204, 2004.
• Kayalı, Y., Yalçın, Y., Taktak, Ş., “Adhesion and wear properties of boro-tempered ductile iron”, Materials and Design 32, 4295-4303, 2011.
• Meriç, C., Şahin, S., Yılmaz, S.S., “Investigation of the effect on boride layer of powder particle size used in boronizing with solid boron-yielding substances”, Materials Research Bulletin 35, 2165-2172, 2000.
• Mohamed, I.A., Ibraheem, A.A., Khashaba, M.I., Ali, W.Y., “Influence of heat treatment on friction and wear of ductile iron: I.role of copper and molybdenum”, International Journal o f Control, Automation and Systems, Vol.2, No.3, 23-30, 2013.
• Düzcükoğlu, H., Demirci, M.T., “Östemperlenmiş küresel grafitli dökme demirlerin aşınma davranışlarının incelenmesi”, Makine Teknolojileri Elektronik Dergisi 3, 21-31, 2008.
• Abedi, H.R., Fareghi, A., Saghafian, H., Kheirandish, S.H., “Sliding wear behavior of a ferritic-pearlitic ductile cast iron with different nodule count”, Wear 268, 622-628, 2010.
• Wang, H.D., “Graphite Solid Lubrication Materials”, Encyclopedia of Tribology, Wang, J.Q. and Chung, Y.W., Springer Press, New York, pp. 1550, 2013.
• Ünlü, B.S., Atik, E., “Investigation of tribological properties of boronized Fe-based SAE 1020 and TS-DDK 40 journal bearings at high loads”, Materials and Design 31, 2690-2696, 2010.