Kullanıcı merkezli tasarım ve ürün kullanılabilirliği üzerine bir literatür araştırması

Kullanıcı merkezli tasarım, ürün tasarımının kullanıcı beklentileri altında şekillendiği ergonomi odaklı bir ürün geliştirme yaklaşımıdır. Ürünlerin kullanıcı merkezli (kullanılabilir) tasarımı için araştırılan kriterler, ergonomi literatüründe performans ve hissel beklentiler olmak üzere iki farklı başlık altında toplanmaktadır. Bu çalışmada ağırlıklı olarak hissel beklentileri dikkate alan kullanıcı merkezli tasarım ve ürün kullanılabilirliğine yönelik bir literatür araştırması sunulmuştur. Literatür araştırmasının ardından konuyla ilgili değerlendirmelere yer verilmiş ve gelecekte üzerinde durulması gerekli konu başlıklarına değinilmiştir.

A literature review on user centered design and product usability

User-centred design (UCD), a design process shaping the product in accordance with the users' expectations, is an ergonomics-oriented product design approach. In the ergonomics literature, the required criteria related to user centred (usable) product design are classified into two major categories: performance and emotional expectations. In this study, a literature review on the user-centred design and the product usability which places greater emphasis on emotional expectations is provided. Following the review, the relevant evaluation and implications for further research is also provided.

PDF

___

1. Helander, M.G. ve Tham, M.P., “Hedonomics- affective human factors design”, Ergonomics, Cilt 46, No 13/14, 1269-1272, 2003.
2. Fung, R.Y.K., Chong, S.P.Y. ve Wang, Y., “A framework of product styling platform approach: styling as intangible modules”, Concurrent Engineering: Research and Applications, Cilt 12, No 2, 89-103, 2006.
3. Khalid, H.M., “Embracing diversity in user needs for affective design”, Applied Ergonomics, Cilt 37, No 4, 409-418, 2006.
4. Khalid, H.M. ve Helander, M.G., “Customer emotional needs in product design”, Concurrent Engineering: Research and Application, Cilt 14, No 3, 197-206, 2006.
5. Pheasant, S.T., Bodyspace: anthropometry, ergonomics and design of work, Taylor & Franchis, London, 1996.
6. Jordan, J.W., An Introduction to Usability, Taylor & Franchis, London, 1998.
7. Veryzer, R.W., “Key factors affecting customer evaluation of discontinuous new products”, Journal of Product Innovation Management, Cilt 15, No 2, 136-50, 1998.
8. Cristiano, J.J., Liker, J.K. ve White, C.C., “Customer-driven product development through quality function deployment in the US and Japan”, Journal of Product Innovation Management, Cilt 17, No 4, 286-308, 2000.
9. Maguire, M. “Methods to support human-centred design”, International Journal of Human- Computer Studies, Cilt 55, 587-634, 2001.
10. Scerbo, W.M., “Usability testing”, Research Techniques in Human Engineering, Weiner, R. (Ed.), Prentice Hall, 1995.
11. Bennet, J., “Managing to meet usability requirements: establishing and meeting software development goals”, Visual Display Terminals, Bennet, J., Case, D., Sandelin, J. and Smith, M. (Eds.), Prentice-Hall, NJ, 161-184, 1984.
12. International Organization for Standardization, “Human-centered design processes for interactive systems”, International Organization for Standardization, ISO13407:1999, 1999.
13. Wixon, D. ve Wilson, C., “The usability engineering framework for product design and evaluation”, Handbook of Human-Computer Interaction, Helander, M. (Ed.), North Holland, Amsterdam, 665-667, 1997.
14. “Ken project report: key usability and ethical issues in the personal navigation program part 1: usability design and evaluation methods”, VTT Technical Research Centre of Finland, Finland 2002.
15. Kontogiannis, T. ve Embrey, D., “User centred design approach for introducing computer based information systems”, Applied Ergonomics, Cilt 28, 109-119, 1997.
16. Butters, L.M. ve Dixon, R.T., “Ergonomics in consumer product evaluation: an evolving process”, Applied Ergonomics, Cilt 29, No 1, 55-58, 1998.
17. Lanning, T.R., “Let the user design”, Taking Software Design Seriously, Practical Techniques for Human-Computer Interaction Design, Karat, J. (Ed.), Academic Press, San Diego, 127-135, 1991.
18. Han, S.H., Yun, M.H., Kim, K.J. ve Kwahk, J., “Evaluation of product usability: development and validation of usability dimensions and design elements based on empirical models”, International Journal of Industrial Ergonomics, Cilt 26, No 4, 477-488, 2000.
19. Han, S.H., Yun, M.H., Kwahk, J. ve Hong, S.W., “Usability of consumer electronic products”, International Journal of Industrial Ergonomics, Cilt 2, 143–151, 2001.
20. Han, S.H. ve Hong, S.W., “A systematic approach for coupling user satisfaction with product design”, Ergonomics, Cilt 46, No 13/14, 1441–1461, 2003.
21. Kwahk, J. ve Han, S.H., “A methodology for evaluating the usability of audiovisual consumer electronics products”, International Journal of Industrial Ergonomics, Cilt 33, 419-431, 2002.
22. Nielsen, J., Usability Engineering, AP Professional, NY, 1993.
23. Desmet, P.M.A., “Measuring emotion: development and application of an instrument to measure emotional response to products”, Funology: From Usability to Enjoyment, Blythe, M. A., Monk, A. F., Overbeeke, K. and Wright, P.C. (Eds.), Kluwer Academic Press, Dordrecht, 111-123, 2003.
24. Nagamachi, M., “Kansei engineering: a new ergonomic consumer-oriented technology for product development”, International Journal of Industrial Ergonomics , Cilt 15, 3-11, 1995.
25. Horiguchi, A. ve Suetomi, T., “A Kansei engineering approach to a driver vehicle system”, International Journal of Industrial Ergonomics, Cilt 15, 25-37, 1995.
26. Fukushima, K., Kawata, H., Fujiwara, Y., ve Genno, H., “Human sensory perception oriented image processing in a color copy system”, International Journal of Industrial Ergonomics, Cilt 15, 63-74, 1995.
27. Matsubara, Y., Nagamachi, M., “Kansei virtual reality technology and evaluation on kitchen design”, Manufacturing Agility and Hybrid Automation, Koubek, R. J. and Karwowski, W. (Eds.), IEA Press, 81-84, 1996.
28. Tanoue, C., Ishizaka, K. ve Nagamachi, M., “Kansei engineering: a study on perception of vehicle interior image”, International Journal of Industrial Ergonomics, Cilt 19, 115-128, 1997.
29. Jindo, T., ve Hirasago, K., “Application studies to car interior of Kansei engineering”, International Journal of Industrial Ergonomics, Cilt 19, 105-114, 1997.
30. Ishihara, S., Ishihara, K., Nagamachi, M. ve Matsubara, Y., “An analysis of Kansei structure on shoes using self-organizing neural networks”, International Journal of Industrial Ergonomics, Cilt 19, 93-104, 1997.
31. Nakada, K., “Kansei engineering research on the design of construction machinery”, International Journal of Industrial Ergonomics, Cilt 19, 129- 146, 1997.
32. Lee, M.W., Yun, M.H., Jung, E.S. ve Freivalds, A., “High touch: ergonomics in conceptual design process-case studies of a remote controller and personal telephones”, International Journal of Industrial Ergonomics, Cilt 19, 239-248, 1997.
33. Lee, M.W., Hwan, M.H. ve Han, S.H., “High Touch-an innovative scheme for new product development: case studies 1994-1998”, International Journal of Industrial Ergonomics, Cilt 27, 271-283, 2001.
34. Yun, M.H., Han, S.H., Kim, K.J. ve Han, S., “Measuring customer perceptions on product usability: development of image and impression attributes of consumer electronic products”, Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Texas, 486-490, 1999.
35. Chuang, C.H. ve Ma, Y. C., “Expressing the expected product images in product design of micro-electronic products”,International Journal of Industrial Ergonomics, Cilt 27, 233- 245, 2001.
36. Kwon, K.S., “Human sensibility ergonomics in product design”, International Journal of Cognitive Ergonomics, 3(1): 51-62, 1999.
37. Han, S.W., Kwang, J.K., Yun, M.H. ve Hong, S.W., “Identifying mobile phone design features critical to user satisfaction”, Human Factors and Ergonomics in Manufacturing, Cilt 14, No 1, 15-29, 2004.
38. Chuang, M.C., Chang, C.C. ve Hsu, S.H., “Perceptual factors underlying user preferences toward product form of mobile phones”, International Journal of Industrial Ergonomics, Cilt 27, 247-258, 2001.
39. Hsu, S.H., Chuang, M.C. ve Chang, C.C., “A semantic differential study of designers’ and users’ product form perception”, International Journal of Industrial Ergonomics, Cilt 25, 375- 391, 2000.
40. Hsiao, S.W. ve Huang, H.C., “A neural network based approach for product form design” Design Studies, Cilt 23, 67-84, 2002.
41. Karlsson, B.S.A., Aronsson, N. ve Sevensson, K.A., “Using semantic environment description as a tool to evaluate car interiors”, Ergonomics, Cilt 46, No 13/14, 1408-1422, 2003.
42. Liu, Y., “Engineering aesthetics and aesthetic ergonomics: theoretical foundations and a dual process research methodology”, Ergonomics, Cilt 46, 13-14, 1273-1292, 2003.
43. Park, J. ve Han, S.H., “A fuzzy rules based approach to modelling affective user satisfaction towards office chair design”, International Journal of Industrial Ergonomics, Cilt 34, 31- 47, 2004.
44. Petiot, J.F. ve Yannou, B., “Measuring consumer perceptions for a better comprehension, specification and assessment of product semantics”, International Journal of Industrial Ergonomics, Cilt 33, 507-525, 2004.
45. Khalid, H.M. ve Helander, M.G., “A framework for affective customer needs in product design”, Theoretical Issues in Ergonomics Science, Cilt 5, No 1, 27-42, 2004.
46. Hsiao, K.A. ve Chen, L.L., “Fundamental dimensions of affective responses to product shapes”, International Journal of Industrial Ergonomics, Cilt 36, 553-564, 2006.
47. Bloch, P.H., “Seeking the ideal form: product design and consumer response”, Journal of Marketing, Cilt 59, No 3, 16-29, 1995.
48. Creusen, M.E.H. ve Schoormans, J.P.L., “The different roles of product appearance in consumer choice”, The Journal of Product Innovation Management, Cilt 22, 63-81, 2005.
49. Hsiao, S.W. ve Liu, E., “A neuro-fuzzy- evolutionary approach for product design”, Integrated Computer-Aided Engineering, Cilt 11, 323-338, 2004.
50. Hsiao, S.W. ve Tsai, H.C., “Applying a hybrid approach based on fuzzy neural network and genetic algorithm to product form design”, International Journal of Industrial Ergonomics, Cilt 35, No 5, 411-428, 2005.
51. Lai, H.H., Chang, Y.M. ve Chang, H.C., “A robust design approach for enhancing the feeling quality of a product: a car profile case study, International Journal of Industrial Ergonomics, Cilt 35, No 5, 445-460, 2005.
52. Lai, H.H., Lin, Y.C., Yeh, C.H. ve Wei, C.H., “User-oriented design for the optimal combination on product design”, International Journal of Production Economics, Cilt 100, No 2, 253-267, 2006.
53. Lai, H.H., Lin, Y.C. ve Yeh, C.H., “Form design of product image using grey relational analysis and neural network models”, Computers & Industrial Engineering, Cilt 32, 2689-2711, 2005.
54. Yanagisawa, H. ve Fukuda, S., “Interactive reduct evolutional computation for aesthetic design, Journal of Computing and Information Science in Engineering, Cilt 5, 1-7, 2005.
55. Jiao, J.R., Zhang, Y. ve Helander, M., “A kansei mining system for affective design”, Expert Systems with Applications, Cilt 30, No 4, 658- 673, 2006.
56. Chen, C.H., Khoo, L.P. ve Yan, W., “An investigation into affective design using sorting technique and kohonen self-organizing map”, Advances in Engineering Software, Cilt 37, 334-349, 2006.
57. Wu, M.C., Lo, Y.F. ve Hsu, S.H., “A case-based reasoning approach to generating new product ideas”, International Journal of Advanced Manufacturing Technology, Cilt 30, 166-173, 2006.
58. Yamamoto, M. ve Lambert, D.R., “The impact of product aesthetics on the evaluation of industrial products”, Journal of Product Innovation Management, Cilt 11, No 4, 309-324, 1994.
59. Hsiao, S.W. ve Chou, J.R., “A creativity-based design process for innovative product design”, International Journal of Industrial Ergonomics, Cilt 34, 421-443, 2004.
60. Jiao, J.R. ve Chen, C.H., “Customer requirement management in product development: a review of research issues, Concurrent Engineering: Research and Applications, Cilt 14, No 3, 173- 185, 2006.
61. Wang, X., Tang, M.I. ve Frazer, J., “Creative stimulator: an interface to enhance creativity in pattern design”, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Cilt 15, 433-440, 2001.
62. Luo, S., Sun, S., Zhu, S. ve Tang, M., “A case study on product collaborative conceptual design technology based on user implicit knowledge”, The 8th International Conference on Computer Supported Cooperative Work in Design Proceedings, Xiamen, China, 191-196, 2003.