ATIK LASTİK KATKILI HARÇ PLAK VE BRİKETLERİN TERMO-MEKANİK DAVRANIŞLARININ ARAŞTIRILMASI

Bu çalışmada; atık otomobil lastiklerinin uygun geometri ve koşullarda harç içerisine ilavesinin termo-mekaniközellikler üzerindeki etkisi araştırılmaktadır. Atık bir otomobil lastiğinin, çelik telli alın yüzeyi ile çelik telbulunmayan yanal yüzeyleri farklı amaçlarla kullanılmıştır. Çelik telli lastikler, şerit biçiminde kesilerek harçiçerisine döşenmişlerdir. Çelik tel bulunmayan lastikler ise, granül boyutuna getirilerek briket içerisinde agregaolarak kullanılmıştır. Harç numunelerde; farklı miktar ve dizilişin harç numunenin ısıl yalıtım performansıüzerinde etkisi araştırılmıştır. Briket numunelerde ise ilave edilen atık lastik miktarının, ısıl yalıtım performansıile fiziko-mekanik özellikler üzerindeki etkisi araştırılmıştır. Atık lastik katkı miktarına bağlı olarak yalıtımdasağlanan minimum iyileşme aralıkları; harç numuneler için % 6.5–13.3 ve briket numuneler için ise % 4.5 – 10.8olarak bulunmuştur. Diğer taraftan, atık lastik katkısı ile briket numunelerin mekanik özelliklerinde önemliseviyede azalmalar, fiziksel özelliklerde ise bazı iyileşmeler söz konusudur. En çarpıcı iyileşme; briketağırlığının % 29’a varan oranlarda azalmasıdır.

___

  • Fontana, J. ve Bartholomew, J., “Use of Concrete
  • Polymer Materials in the Transportation Industry,
  • Applications of Polymer Concrete", American
  • Concrete Institute, SP-69Detroit, 21-30, 1981.
  • Topçu, İ.B., “The Properties of Rubberized
  • Concretes”, Cement and Concrete Research,
  • Cilt 25, 304-310, 1995.
  • Rad, F., Rubberized Concrete, New Horizons in
  • Construction Materials, Envo Publishing
  • Company, No:1, 287-292, 1992.
  • Khatib, Z.K., Bayomy, F.M., “Rubberized
  • Portland Cement Concrete”, ASCE Journal of
  • Materials in Civil Engineering, Cilt 11, 206–
  • , 1999.
  • Fedroff, D., Mechanical Properties of Concrete
  • with Ground Rubber, MSc thesis, North
  • Carolina State University, Raleigh, 1995.
  • Fedroff, D., Ahmad, S. ve Savas, B.Z.,
  • “Mechanical Properties of Concrete with Ground
  • Waste Tire Rubber”, Transportation Research
  • Record, No. 1532, 66–72, 1996.
  • D. Raghavan, H. ve Ferraris, C.F., “Workability,
  • Mechanical Properties and Chemical Stability of
  • A Recycled Tire Rubber-Filled Cementitious
  • Composite”, Journal of Materials Science, Cilt
  • , 1745–1752, 1998.
  • Eldin, N.N. ve Senouci, A.B., “Rubber-Tire
  • Particles as Concrete Aggregates”, ASCE
  • Journal of Materials in Civil Engineering, Cilt
  • , 478–496, 1993.
  • Ali, N.A., Amos, A. ve Roberts, M., “Use of
  • Ground Rubber Tyres in Portland Cement
  • Concrete,” Proc. Int. Conf. Concrete 2000,
  • University of Dundee, UK, 379-390, 1993.
  • Fattuhi, N.I. ve Clark, L.A., “Cement-based
  • Materials Containing Shredded Scrap Truck Tyre
  • Rubber,” Journal of Construction and Building
  • Materials, Cilt 10, 229-236, 1996.
  • Goulias, D.G. and Ali, NA., “Non-destructive
  • Evaluation of Rubber Modified Concrete,” In
  • Proceedings, Special Conference ASCE, New
  • York, 111-120, 1997.
  • Topcu, I.B. ve Avcular, N., “Analysis of
  • Rubberized Concrete as A Composite Material”,
  • Cement and Concrete Research, Cilt 27, 1135–
  • , 1997.
  • Topcu, I.B. ve Avcular, N., “Collision Behaviors
  • of Rubberized Concrete”, Cement and Concrete
  • Research, Cilt 27, 1893–1898, 1997.
  • Topcu, I.B., ve Ozcelikors, Y., “Rubberised
  • Concrete,” Akdeniz University, Isparta
  • Engineering Faculty, 7th Engineering Week,
  • Isparta, Turkey, 1991.
  • Guoqiang, L., Gregory, G., John, E., Christopher,
  • A., Michael, A.S. ve Su, S.P., “Waste Tire Fiber
  • Modified Concrete”, Composites: Part B, Cilt
  • , 305–312, 2004.
  • Pierce, C.E. ve Blackwell, M.C., “Potential of
  • Scrap Tire Rubber as Lightweight Aggregate in
  • Flowable Fill”, Waste Management, Cilt 23,
  • –208, 2003.
  • Tantala, M.W., Lepore, J.A. and Zandi, I.,
  • “Quasi-elastic Behaviour of Rubber Included
  • Concrete,” In Proceedings, 12th International
  • Conference on Solid Waste Technology and
  • Management, 1996.
  • Savas, B. Z., Ahmad, S.ve Fedroff, D., “Freezethaw
  • Durability of Concrete with Ground Waste
  • Tire Rubber,” Transportation Research
  • Record, No. 1574, 80-88, 1996.
  • Turgut, P. ve Yeşilata, B., “Physico-Mechanical
  • and Thermal Performances of Newly Developed
  • Rubber-Added Bricks”, Energy and Buildings,
  • Cilt 40, 679-688, 2008.
  • Terry, A.G., “Designing of Building Products
  • Made with Recycled Tires”, Contractor’s
  • Report to the Integrated Waste Management
  • Board, 2004.
  • TS 706 EN 12620, Beton Agregaları, Türk
  • Standartları Enstitüsü, Ankara, 2003.
  • Yesilata, B. ve Turgut, P., “A Simple Dynamic
  • Measurement Technique for Comparing Thermal
  • Insulation Performances of Anisotropic Building
  • Materials“, Energy and Buildings, Cilt 39,
  • -1034, 2007.
  • Yeşilata, B., Turgut, P. ve Işıker, Y., “Kompozit
  • Yapı Malzemelerinde Isıl Özellik Ölçümü-1:
  • Mevcut Ölçüm Tekniklerin İrdelenmesi”,
  • Mühendis ve Makina, Cilt 48, 2-9, 2007.
  • Turgut P., Yeşilata B. ve Işıker, Y., “Kompozit
  • Yapı Malzemelerinde Isıl Özellik Ölçümü-2:
  • Hurda Lastik Katkılı Betonlar için Ölçüm
  • Sonuçları”, Mühendis ve Makina, Cilt 48, 33-
  • , 2007.
  • ASTM C 67, 2003, Standard Test Methods for
  • Sampling and Testing Brick and Structural
  • Clay Tile, ASTM Standards, Philadelphia.
  • BS 6073: Part 1, 1981, Precast Concrete
  • Masonry Units: Specification for Precast
  • Concrete Masonry Units. British Standards
  • Institution.
  • TS 705, Solid Brick and Vertically Perforated
  • Bricks, Turkish Standard Institution, Ankara,
  • -
  • ASTM C 129, 2006, Standard Specification for
  • Non-Load-Bearing Concrete Masonry Units,
  • ASTM Standards, Philadelphia.
  • ASTM C 140, 2006, Methods of Sampling and
  • Testing Concrete Masonry Units, ASTM
  • Standards, Philadelphia.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ