___

• Ozcatalbas Y, Ercan F, “The effects of heat
• treatment on the machinability of mild steels”,
• Journal of Materials Processing Technology, 136,
• –238, 2003.
• Jokhio M. H, Memon S. A. and Sangi M. J,
• “Effect of heat treatment on the microstructure
• and mechanical properties of low carbon SEA
• steel” Quaid-E-Awam Universty Research
• Journal of Engeenering, Science and Technology
• Volum 1, No 1, January-June 2000.
• Heat Treatment Procedure Qualıfıcatıon Final
• Technical Report The Pennsylvania State
• University, Park, PA, Work Performed Under
• Contract No. DE-FC07-99ID13841, Work
• Prepared for U.S. Department of
• Energy,”http://www.osti.gov/bridge/servlets/ purl
• /836878-AegKFa/836878.PDF”. (May 2009)
• Part1Materıals,http://media.wiley.com/product_da
• ta/excerpt/03/04714499/0471449903.pdf, May
• -
• http://www.boun.edu.tr/undergraduate/engineering
• /mechanical_engineering.html “heat
• treatment.doc”, May 2009.
• Massachusetts Institute of Technology Department
• of Mechanical Engineering Cambridge, MA
• 002 Mechanics and Materials II Spring
• Laboratory Module No. 5 Heat Treatment
• ofPlain Carbon and LowAlloy Steels:Effects on
• Macroscopic Mechanical Properties, “Heat
• treatment of carbon steel and low alloy steel.pdf”,
• May 2009.
• Tool Steel, http://www.cogne.com/schedeprodotti
• /UK19.pdf, July 2009.
• Steels For Cold Work Tooling,
• http://www.uddeholm.co.jp/pdf/coldwork-english.
• pdf, July 2009.
• Thyrodur 2436, http://www.gsmetal.cz/pdf/
• thyrodur_2436_cz.pdf, July 2009.
• BöhlerK107 ColdWork Tooling,
• http://www.osmanlicelik.com.tr/images/pdf/K107
• DE.pdf, July 2009.
• Part-1,http://www2.coromant.sandvik.com/
• coromant/pdf/dm_app/Part_1.pdf, July 2009.
• M. Gojic´, L. Kosecb, P. Matkovic,
• “Embrittlement damage of low alloy Mn–V steel
• Engineering Failure Analysis”,10, 93–102, 2003.
• N. Saheb, T. Laoui, A.R. Daud, M. Harun, S.
• Radiman, R. Yahaya, “Influence of Ti addition on
• wear properties of Al–Si eutectic alloys”, Wear,
• 656–662, 2000.
• Hasirci, H. ve Gül, F. “Al-Cu Döküm
• Alaşımlarının Abrasif Aşınma Davranışına
• Magnezyum ve Nikel’in Etkileri”, 11. Uluslararası
• Denizli Malzeme Sempozyumu Bildiriler Kitabı,
• Cilt-II, 1306-1313, 19-20-21, Nisan 2006, Denizli.
• Sawla, S. and Das, S. “Combinet effect of
• reinforcement and heat treatment on the two
• body abrasive wear of aluminum alloy and
• aluminum particle composites”, Wear, 257,
• -561, 2004.
• Lasa, L. and Rodriguez-Ibabe, J.M.. Effect of
• composition and processing route on the wear
• behaviour of Al-Si alloys. Scripta Materialia, 46,
• -481, 2002.
• Sun,Y., Baydoğan, M. and Çimenoğlu, H., “The
• effect of deformation before ageing on the wear
• resistance of an aluminum alloy” Materials
• Letters, 38, 221-226, 1999.
• Jiang, Q.C., Xu, C.L., Lu M. and Wang, H.Y., “
• Effect of new Al-P-Ti-TiC-Y modifier on primary
• silicon in hypereutectic Al-Si alloys”, Materials
• Letters, 59, 624-628, 2005.