Investigation of the Thermal Properties of Cu-based Shape Memory Alloy

This study aims to investigate the thermal properties of the phase transformation that may occur with the effect of temperature in Cu-14.70wt.%Al-4.72wt.%Ni shape memory alloy. The sample was annealed at 1203 K for 30 min in an argon atmosphere and then cooled rapidly in salt-ice water. By using Differential Scanning Calorimetry (DSC), the martensitic phase transformation parameters of the sample were found. The activation energy required for these transformations was calculated using the Kissinger, Augis-Bennett, and Takhor methods. Thermogravimetric Analysis (TGA) measurements investigated the mass changes that may occur with the effect of temperature. Surface morphology was analyzed using an optical micrograph.

Anahtar Kelimeler:

termal

Investigation of the Thermal Properties of Cu-based Shape Memory Alloy

Keywords:

thermal properties, shape memory alloy activation energy,

PDF

___

1. Nishiyama Z, Fine ME, Meshii M, Wayman CM (1978) Martensitic transformation. Academic Press, London
2. Perkins J (2000) Shape Memory. Springer Science+Business Media, LLC
3. Van Humbeeck J (2001) Shape memory alloys: A material and a technology. Adv Eng Mater 3:837–850. https://doi.org/10.1002/1527-2648(200111)3:11<837::AID-ADEM837>3.0.CO;2-0
4. Mohd Jani J, Leary M, Subic A, Gibson MA (2014) A review of shape memory alloy research, applications and opportunities. Mater Des 56:1078–1113. https://doi.org/10.1016/j.matdes.2013.11.084
5. Chen Q, Thouas GA (2015) Metallic implant biomaterials. Mater Sci Eng R Reports 87:1–57. https://doi.org/10.1016/j.mser.2014.10.001
6. Gojić M, Vrsalović L, Kožuh S, et al (2011) Electrochemical and microstructural study of Cu-Al-Ni shape memory alloy. J Alloys Compd 509:9782–9790. https://doi.org/10.1016/j.jallcom.2011.07.107
7. Alaneme KK, Anaele JU, Okotete EA (2021) Martensite aging phenomena in Cu-based alloys: Effects on structural transformation, mechanical and shape memory properties: A critical review. Sci African 12:. https://doi.org/10.1016/j.sciaf.2021.e00760
8. Canbay CA, Karagoz Z (2013) Effects of Annealing Temperature on Thermomechanical Properties of Cu-Al-Ni Shape Memory Alloys. Int J Thermophys 34:1325–1335. https://doi.org/10.1007/s10765-013-1486-z
9. Niedbalski S, Durán A, Walczak M, Ramos-Grez JA (2019) Laser-assisted synthesis of Cu-Al-Ni shape memory alloys: Effect of nert gas pressure and Ni content. Materials (Basel) 12:. https://doi.org/10.3390/MA12050794
10. Ozbulut OE, Hurlebaus S, Desroches R (2011) Seismic response control using shape memory alloys: A review. J Intell Mater Syst Struct 22:1531–1549. https://doi.org/10.1177/1045389X11411220
11. Pereira EC, Matlakhova LA, Matlakhov AN, et al (2016) Reversible martensite transformations in thermal cycled polycrystalline Cu-13.7%Al-4.0%Ni alloy. J Alloys Compd 688:436–446. https://doi.org/10.1016/j.jallcom.2016.07.210
12. Payandeh Y, Mirzakhani B, Bakhtiari Z, Hautcoeur A (2022) Precipitation and martensitic transformation in polycrystalline CuAlNi shape memory alloy – Effect of short heat treatment. J Alloys Compd 891:162046. https://doi.org/10.1016/j.jallcom.2021.162046
13. Pushin VG, Kuranova NN, Svirid AE, et al (2022) Design and Development of High-Strength and Ductile Ternary and Multicomponent Eutectoid Cu-Based Shape Memory Alloys: Problems and Perspectives. Metals (Basel). 12
14. Lattanzi MG, Sozzetti A (2010) Gaia and the Astrometry of Giant Planets. Cambridge University Press, Cambridge 15. Chen Y, Schuh CA (2011) Size effects in shape memory alloy microwires. Acta Mater 59:537–553. https://doi.org/10.1016/j.actamat.2010.09.057
16. Miyazaki S, Otsuka K (1989) Development of Shape Memory Alloys. ISIJ Int 29:353–377. https://doi.org/10.2355/isijinternational.29.353
17. Perkins J, Muesing WE (1983) MARTENSITIC TRANSFORMATION CYCLING EFFECTS IN Cu-Zn-Al SHAPE MEMORY ALLOYS. Metall Trans A, Phys Metall Mater Sci 14 A:33–36. https://doi.org/10.1007/BF02643734
18. Ortín J, Planes A (1988) Thermodynamic analysis of thermal measurements in thermoelastic martensitic transformations. Acta Metall 36:1873–1889. https://doi.org/10.1016/0001-6160(88)90291-X
19. Xu H, Tan S (1995) Calorimetric investigation of a Cu-Zn-Al alloy with two way shape memory. Scr Metall Mater 33:749–754. https://doi.org/10.1016/0956-716X(95)00269-2 20. Salzbrenner RJ, Cohen M (1979) On the thermodynamics of thermoelastic martensitic transformations. Acta Metall 27:739–748. https://doi.org/10.1016/0001-6160(79)90107-X
21. Tong HC, Wayman CM (1975) Thermodynamics of thermoelastic martensitiC transformations. Acta Metall 23:209–215. https://doi.org/10.1016/0001-6160(75)90185-6
22. Lawner BJ, Mattu A (2012) Cardiac Arrest. In: Cardiovascular Problems in Emergency Medicine: A Discussion-based Review. pp 123–137
23. Augis JA, Bennett JE (1978) Calculation of the Avrami parameters for heterogeneous solid state reactions using a modification of the Kissinger method. J Therm Anal 13:283–292. https://doi.org/10.1007/BF01912301
24. Aydogdu Y, Aydogdu A, Adiguzel O (2002) Self-accommodating martensite plate variants in shape memory CuAlNi alloys. J Mater Process Technol 123:498–500. https://doi.org/10.1016/S0924-0136(02)00140-1
25. Recarte V, Pérez-Landazábal JI, Ibarra A, et al (2004) High temperature β phase decomposition processin a Cu-Al-Ni shape memory alloy. Mater Sci Eng A 378:238–242. https://doi.org/10.1016/j.msea.2003.09.111