___

• [1] S. McAllister, J. Chen, and A. C. Fernandez-Pello, Thermodynamics of Combustion, Fundamentals of Combustion Processes. 1st Edition, Springer, USA, 18-20, 2011.
• [2] U.K. Terzi and R. Baykal. Efficient and effective use of energy: A case study of Tofas, Environmental Research, Engineering and Management, 1: 55 (2011) 29-33.
• [3] B. Simsek, E.H. Simsek and T. Altunok, Empirical and statistical modeling of heat loss from surface of a cement rotary kiln system. Journal of the Faculty of Engineering and Architecture of Gazi University, 28: 1 (2013) 59-66.
• [4] O. Ünlü, Sanayide enerji tasarrufu çalışmalarının önemi ve buhar sistemleri ile ilgili uygulama örnekleri”. IX. Ulusal Tesisat Mühendisliği Kongresi ve Sergisi Bildirileri, 2009.
• [5] C. Xu and D. Cang, A brief overview of low CO2 emission technologies for iron and steel making. Journal of Iran and Steel Research, International, 17: 3 (2010) 1-7.
• [6] M. Eyidoğan, D. Kaya, Ş. Dursun, O. Taylan, Endüstriyel tav fırınlarında enerji tasarrufu ve emisyon azaltma fırsatları. Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 29: 4 (2014) 735-743.
• [7] E. Wali, Optimum working fluids for solar powered Rankine cycle cooling of buildings. Solar Energy, 25: 3 (1980) 235-241.
• [8] M. Eyidoğan, Organik Rankine Çevrimli Güç Üretim Sisteminin Enerji Ve Ekserji Analizi. Doktora Tezi, Karabük Üniversitesi Fen Bilimleri Enstitüsü, 2014.
• [9] B. F. Tchanche, S. Quoilin, S. Declaye, G. Papadakis and V. Lemort, Economic optimization of small scale organic Rankine cycles”. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS), Lausanne, Switzerland, 1-10, 2010.
• [10] Papadopoulos, A. I., Stijepovic, M. and Linke, P. On the systematic design and selection of optimal working fluids for organic Rankine cycles. Applied Thermal Engineering, 30: 6-7 (2010) 760-769.
• [11] O. Badr, S. D. Probert and P. W. O’Callaghan, Selecting a working fluid for a Rankine cycle engine. Applied Energy, 21:1 (1985) 1-42.
• [12] V. Maizza, and A. Maizza, Unconventional working fluids in organic Rankine cycles for waste energy recovery systems. Applied Thermal Engineering, 21: 3 (2001) 381-390.
• [13] H. Chen, D. Y. Goswami, and E. K. Stefanakos, A review of thermodynamic cycles and working fluids for the conversion of low-grade heat. Renewable and Sustainable Energy Reviews, 14: 9 (2010) 3059-3067.
• [14] B. F. Tchanche, G. Papadakis, G. Lambrinos and A. Frangoudakis, Fluid selection for a low-temperature solar organic Rankine cycle. Applied Thermal Engineering, 29: 11-12 (2009) 2468-2476.
• [15] E. Wali, Working fluids for solar Rankine-cycle cooling systems. Energy, 5: 7 (1980) 631-639.
• [16] T. C. Hung, T. Y. Shai and S. K. Wang, A review of organic Rankine cycles (ORCs) for the recovery of low-grade waste heat. Energy, 22: 7 (1997) 661-667.
• [17] Total references, “Turboden references”, http://www.turboden.eu/en/references/references-searchpdf.php?country = all&application=all&power=all, 2013.
• [18] Reference selection “Tri-o-gen references” http://www.triogen.nl/references/reference-overview, 2013.
• [19] Global project map “Ormat Inc” http://www.ormat.com/global-project, 2013.
• [20] J. J. Bonilla, J. M. Blanco, L. Lopez and J. M. Sala, Technological recovery potential of waste heat in the industry of the Basque Country. Applied Thermal Engineering, 17: 3 (1997): 283-288.
• [21] S. R. Latour, J. G. Menningmann, and B. L. Blanney, Waste heat recovery potential in selected industries. (EPA), 30: 7 (1982) 1-6.
• [22] S. Quoilin, and V. Lemort, Technological and economical survey of organic Rankine cycle systems. 5th European Conference on Economics and Management of Energy in Industry, Algarve-Portugal, 4-5, 2009.
• [23] N. Galanis, E. Cayer, P. Roy, E. S. Denis, and M. Desilets, Electricity generation from low temperature soures. Journal of Applied Fluid Mechanics, 2: 2 (2009): 55-67.
• [24] BCS Inc. Waste heat recovery: technologies and opportunities in U.S. industry. US Dept. of Energy (DOE), USA, 25-29, 2008.
• [25] R. Bohl, Waste heat recovery from existing simple cycle gas turbine plants – A case study. 18th Symposium on Industrial Application of Gas Turbines (IAGT), Banff, Alberta, Canada, 1-14, 2009.
• [26] S. Quoilin, S. Declayeand and V. Lemort, Expansion machine and fluid selection for the organic Rankine cycle. 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), Antalya, Turkey, 1-7, 2010.
• [27] V. Maizza, and A. Maizza, Unconventional working fluids in organic Rankine cycles for waste energy recovery systems. Applied Thermal Engineering, 21: 3 (2001) 381-390.
• [28] H. Chen, D. Y. Goswami, and E. K. Stefanakos, A review of thermodynamic cycles and working fluids for the conversion of low-grade heat. Renewable and Sustainable Energy Reviews, 14: 9 (2010) 3059-3067.
• [29] T. C. Hung, T. Y. Shai, and S. K. Wang, A review of organic Rankine cycles (ORCs) for the recovery of low-grade waste heat. Energy, 22: 7 (1997) 661-667.
• [30] R. Chacartegui, D. Sanchez, J. M. Munoz and T. Sanchez, Alternative ORC bottoming cycles for combined cycle power plants. Applied Energy, 86: 10 (2009) 2162-2170.
• [31] G. Angelino, and P. Colonna di Paliano, Multicomponent working fluids for organic Rankine cycles (ORCs). Energy, 23: 6 (1998): 449-463.
• [32] H. Chen, D. Yogi Goswami, M. M. Rahman, and E. K. Stefanakos, Energetic and exergetic analysis of CO2-and R32-based transcritical Rankine cycles for low-grade heat conversion. Applied Energy, 88: 8 (2011) 2802-2808.
• [33] N. A. Lai, M. Wendland and J. Fischer, Working fluids for high-temperature organic Rankine cycles. Energy, 36: 1 (2011) 199-211.
• [34] E. Cayer, N. Galanis, M. Desilets, H. Nesreddine and P. Roy, Analysis of a carbon dioxide trans critical power cycle using a low temperature source, Applied Energy, 86: 7-8 (2008) 1055-1063.