___

• [1] Çakar, Y., “Toz enjeksiyon kalıplama ile üretilmiş Ti-6Al-4V parçalarda işlem, yapı ve özellik ilişkileri”, Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, 2006.
• [2] İçdem, C., “Saf titanyum ve Ti-6Al-4V, Ti-6Al-7Nb alaşımlarının akışkan yatak ortamında termal oksidasyonu”, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, 2007.
• [3] Nouari, M. and Makich, H., “Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555”, International Journal of Refractory Metalsand Hard Materials, 41, 259-269, 2013.
• [4] Park, K.H., Beal, A., Kim. D., Know, P. and Lantrip, J., “Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools”, Wear, 271, 2826-2835, 2011.
• [5] Farias, A., Batalha, G.F., Prados, E.F. Magnabosco, R. and Delijaicov, S., “Tool wear evaluations in friction stir processing of commercial titanium Ti-6Al-4V”, Wear, 302, 1327-1333, 2013.
• [6] Wong, F.R., Sharif, S., Kamdani, K. and Rahim, E.A., “The effect of drill point geometry and drilling technique on tool life when drilling titanium alloy, Ti-6Al-4V”, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21-23 May, Johor Bahru, Malaysia, 2008.
• [7] Ramesh, S., Karunamoorthy, L. and Palanikumar, K., “Surface roughness analiysis in machining of titanium alloy”, Materials and Manufacturing Processes, 23, 174-181, 2008.
• [8] Komanduri, R. and Reed, W.R., “Evaluation of carbide grades and a new cutting geometry for machining titanium alloys”, Wear, 92, 113-123, 1983.
• [9] Myers, J.R., Bomberger, H.B. and Froes, F.H., “Corrosion behavior and use of titanium and its alloys”, Journal of Metals, 36, 50-60, 1984.
• [10] Froes, F.H. and Bomberger, H.B., “The beta titanium alloys”, Journal of Metals, 36, 55-62, 1985.
• [11] Metals Handbook, “Properties and Selection, Stainles Steels, Tool Materials and Special-Putrpose Metals”, ASM, Volum 3, 9th edition, 1980.
• [12] Minton, T., Ghani, S., Sammler, F., Bateman, R., Füstmann, P. and Roeder, M., “Temperature of internally-cooled diamond-coated tools for dry-cutting titanium”, International Journal of Machine Tools & Manufacture, 75, 27-35, 2013.
• [13] Machado, A.R. and Wallbank, J., “Machining of titanium and its alloys-a review”, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 204, 53-60, 1990.
• [14] Harvey, P.D., “Engineering properties of steel”, ASM, Metals Park, OH, ISBN: 0871701448, 1982.
• [15] Şahin, Y., “Talas Kaldırma Prensipleri 2”, Nobel Yayın Dağıtım, Ankara, 2001.
• [16] Mathew, N.T. and Vijayaraghavan, L., “Drilling of titanium aluminide at different aspect ratio under dry andwet conditions”, Journal of Manufacturing Processes, 24, 256–269, 2016.
• [17] Chatterjee, S., Mahapatra, S.S. and Abhishek, K., “Simulation and optimization of machining parameters in drilling of titanium alloys”, Simulation Modelling Practice and Theory, 62, 31–48, 2016.
• [18] Zhu, Z., Sui, S., Sun, J., Li, J. and Li, Y., “Investigation on performance characteristics in drilling of Ti6Al4V alloy”, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-017-0508-6, 2017.
• [19] Mathew, N.T. and Vijayaraghavan, L., “High-throughput dry drilling of titanium aluminide”, Materials And Manufacturing Processes, 32, 199-208, 2017.
• [20] Lazoğlu, I., Poulachon, G., Ramirez, C., Akmal, M., Marcon, B., Rossi, F., Outeiro, J. and Krebs, M., “Thermal analysis in Ti-6Al-4V drilling”, CIRP Annals - Manufacturing Technology, http://dx.doi.org/10.1016/j.cirp.2017.04.020, 2017.
• [21] Darsin, M., Pasang, T. and Chen, Z., “Performance of TiAlN PVD Coated Carbide Drill when Drilling Titanium 6246 Alloy”, MATEC Web of Conferences, doi: 10.1051/matecconf/20171090200, 2017.
• [22] Su, Y., Chen, D.D. and Gong, L, “3D Finite Element Analysis of Drilling of Ti-6Al-4V Alloy”, International Conference on Computer Information Systems and Industrial Applications CISIA 2015, 907-911, 2015.
• [23] Li, H., He, G., Qi X., Wang, G., Lu C. and Gui, L., “Tool wear and hole quality investigation in dry helical milling of Ti-6Al-4V alloy”, International Journal of Advanced Manufacturing Technology, 71, 1511–1523, 2014.
• [24] Rey, P.A., LeDref, J. and Landon, Y., “Modelling of cutting forces in orbital drilling of titanium alloy Ti–6Al–4V”, International Journal of Machine Tools & Manufacture, 106, 75–88, 2016.
• [25] Safari, H., Sharif, S., Izham, S. and Jafari, H., “Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy”, International Journal of Advanced Manufacturing Technology, 78, 651–657, 2015.
• [26] Faga, M.G., Priarone, P.C., Robiglio, M., Settineri, L. and Tebaldo, V., “Technological and Sustainability Implications of Dry, Near-Dry, and Wet Turning of Ti-6Al-4V Alloy”, Internatıonal Journal of Precision Engineering and manufacturing-Green Technology, 4, 129-139, 2017.
• [27] Pan, Z., Shih, D.S., Tabei, A., Garmestani, H. and Liang, S.Y., “Modeling of Ti-6Al-4V machining force considering material microstructure evolution”, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-016-9964-7, 2017.
• [28] Nguyen, D., Kang, D., Bieler, T., Park, K. and Known, P., Microstructural impact on flank wear during turning of various Ti-6Al-4V alloys”, Wear, 384–385, 72–83, 2017.
• [29] Carou, D., Rubio, E.V., Agostina, B. and Teti, R., “Sustainable turning of the Ti-6Al-4V alloy at low feed rates: surface quality assessment”, Procedia Manufacturing, 8, 769-774, 2017.
• [30] Ali, M.A.M., Azmi, A.I., Khalil, A.N.M. and Leong, K.W., “Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys”, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-017-0133-4, 2017
• [31] Arulkirubakaran, D. and Senthilkumar, V., “Performance of TiN and TiAlN coated micro-grooved tools during machining of Ti-6Al-4V alloy”, International Journal of Refractory Metals and Hard Materials, 62, 47–57, 2017.
• [32] Rancic, M., Colin, C., Sennour, M., Costes, J-P. and Poulachon, G., “Microstructural Investigations of the White and Deformed Layers Close to the Turned Surface of Ti-6Al-4V”, Metallurgical and Materials Transactions A, 48A, 389-402, 2017.
• [33] Chen, Y., Sun, R., Gao, Y. and Leopold, J., “A nested-ANN prediction model for surface roughness considering the effects of cutting forces and tool vibrations”, Measurement, 98, 25–34, 2017.
• [34] Gupta, M.K. and Sood, P.K., “Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach”, Friction, 5, 155–170, 2017.
• [35] Bar-Hen, M. and Etsion, I., “Experimental study of the effect of coating thickness and substrate roughness on tool wear during turning”, Tribology International, 110, 341–347, 2017.
• [36] Çelik, Y.H., Yildiz, H. and Özek, C., “Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V”, Materials Testing, 58, 519-525, 2016.
• [37] Li, R. and Shih, A.J., “Tool temperature in titanium drilling”, Journal of Manufacturing Science and Engineering, 129, 740-749, 2007.
• [38] Kıvak, T. and Şeker, U., “The effect of coating materials and cutting conditions on the cutting forces in the drilling of Ti-6Al-4V alloy”, International Iron& Steel Symposium, Karabük-Turkey, April 02–04, 855–860, 2012.
• [39] Rahim, E.A. and Sasahara, H., “A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys”, Tribology International, 44, 309–317, 2011.
• [40] Pujana, J., Rivero, A., Celaya, A. and López de Lacalle, L.N., “Analysis of utrasonic-assisted drilling of Ti6Al4V”, International Journal of Machine Tools &Manufacture, 49, 500–508, 2009.
• [41] SenthilKumar, M., Parabukarthi, A. and Krishnaraj, V., “Study on tool wear and chip formation during drilling carbon fiber rainforced polymer (CFRP)/titanium alloy (Ti-6Al-4V) stacks”, Procedia Engineering, 64, 582-592, 2013.
• [42] Guu, Y.H., Deng, S., Ti-KunangHou, M., Hsu C.H. and Tseng, K.S., “Optimization of machining parameters for stress concentration in micro drilling of titanium alloy”, Materials and Manufacturing Processes, 27, 207–213, 2012.
• [43] Isbilir, O. and Ghassemieh, E., “Finite element analysis of drilling of titanium alloy”, ICM11, Procedia Engineering, 10, 1877–1882, 2011.
• [44] Cantero, J.L., Tardío, M.M., Canteli, J.A., Marcos, M. and Miguélez, M.H., “Dry drilling of alloy Ti-6Al-4V”, International Journal of Machine Tools &Manufacture, 45, 1246-1255, 2005.
• [45] Shyha, I.S., Soo, S.L., Aspinwall, D.K., Bradley, S., Perry, R., Harden, P. and Dawson, S., “Hole quality assesment following drilling of metalic-composite stacks”, International Journal of Machine Tools & Manufacture, 51, 569–578, 2011.
• [46] Feldshtein, E., “The influence of machining condition on burr shapes when drilling reach-through holes in difficult-to-cut materials”, Advanced in Manufacturing Science and Technology, 35, 75-83, 2011
• [47] Biermann, D. and Hartmann, H., “Reduction of burr formation in drilling using cryogenic process cooling”, 45th CIRP Conference on Manufacturing System, Procedia CIRP 3, 85–90, 2012.
• [48] Çelik, Y.H. and Karabiyik, A., “Effect of cutting parameters on machining surface and cutting tool in milling of Ti-6Al-4V alloy”, Indian Journal of Engineering & Materials Sciences, 23, 349-356, 2016.
• [49] Wang, Z.G., Rahman, M. and Wong, Y.S., “Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys”, Wear, 258, 752-758, 2005.
• [50] Zareena, A.R. and Veldhuis, S.C., “Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium”, Journal of Materials Processing Technology, 212, 560-570, 2012.
• [51] Thepsonthi, T. and Özel, T., “Experimental and finite element simulation besed investigations on micro-milling Ti-6Al-4V titanium alloy: Effect of cBN coating on tool wear”, Journal of Materials Processing Technology, 213, 532-542, 2013.
• [52] López de lacalle, L.N., Pérez, J., Llorente, J.I. and Sánchez, J.A, “Advanced cutting condition for he milling of aeronautical alloys”, Journal of Materials Processing Technology, 100, 1-11, 2000.
• [53] Bach, P., Trmal, G., Zeman, P., Vana, J. and Maly, J., “High performance titanium milling at low cutting speed”, Procedia CIRP, 1, 226-231, 2012.
• [54] Ünal, E. ve Karaca, F., Ti-6Al-4V alaşımının dik işlem merkezli CNC tezgahında işlenebilirliğinin araştırılması, Doğu Anadolu Bölgesi Araştırılmaları, 6, 135-139, 2007.
• [55] Çelik, Y.H., Kilickap, E. and Güney, M., Investigation of cutting parameters affecting on tool wear and surface roughness in dry turning of Ti-6Al-4V using CVD and PVD coated tools, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39, 2085-2093, 2017.
• [56] Armendia, M., Osborne, P., Garay, A., Belloso, J., Turner, S. and Arrazola, P. J., “Influence of heat treatment on the machinability of titanium alloy”, Materials and Manufacturing Processes, 27, 457-461, 2012.
• [57] Muthukrishnan, N. and Davim, P., “Influence of coolant in machinability of titanium alloy (Ti-6Al-4V)”, Journal of Surface Engineered Materials and Advanced Technology, 1, 9-14, 2011.
• [58] Ramesh, S., Karunamoorthy, L. and Palanikumar, K., “Fuzzy modeling and analiysis of machining parameters in machining titanium alloy”, Materials and Manufacturing Processes, 23, 439-447, 2008.
• [59] Andriya, N., “Dry machining of Ti-6Al-4V using PVD coated TiAlN tools”, Proceedings of the World Congress on Engineering (WCE2012), 3, 4-6 July London, U.K, 2012.
• [60] Zhang, Y., Zhou, Z., Wang, J. and Li, X., “Diamond tool wear in precision turning of titanium alloy”, Materials and Manufacturing Processes, 28, 1061-1064, 2013.