___

• Kaynaklar (References)
• - T.C. Enerji ve Tabii Kaynaklar Bakanlığı, Bilgi Merkezi, Enerji, Kömür. . Erişim Tarihi: 21 Nisan 2016.
• - TMMOB Ziraat Mühendisleri Odası. Fındık Raporu, 2015. . Erişim Tarihi: 21 Nisan 2016.
• - TÜBİTAK MAM-ÇTÜE, Zeytin Sektörü Atıklarının Yönetimi Projesi (5148602) Nihai Raporu, . Erişim Tarihi: 22 Nisan 2016.
• - TMMOB Ziraat Mühendisleri Odası. Ayçiçeği ve Ayçiçek Yağı Üretimi, İthalatı ve Sorunları, 2015.
• Erişim Tarihi: 21 Nisan 2016.
• - Benk, A. and Coban, A. “Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze”, Fuel Processing Technology, Vol. 92, 1078-1086, 2011.
• - Gürbüz Beker, Ü. and Küçükbayrak, S. “Briquetting of Istanbul-Kemerburgaz lignite of Turkey”. Fuel Processing Technology, Vol. 47, 111-118, 1996.
• - Stenius, P., “Forest Products Chemistry”, 2nd ed., Papermaking Science and Technology Series, Vol. 3, Finnish Paper Engineers Association and TAPPI, Helsinki, Finland, 62–78, 2000. ISBN 952-5216-03-9
• - “Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures (D 5142-04)”, Annual Book of ASTM Standards, 2004a.
• - “Standard Test Method for Gross Calorific Value of Coal and Coke (D 5865-07a)”, Annual Book of ASTM Standards, 2007.
• - “Volatile Matter in the Analysis of Particulate Wood Fuels (E 872)”, Annual Book of ASTM Standards, 1982.
• - “Direct Moisture Content Measurement of Wood and Wood-Base Materials (D 4442)”, Annual Book of ASTM Standards, 1992.
• - “Ash in Biomass (E 1755)”, Annual Book of ASTM Standards, 1995.
• - “Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (E 711-87)”, Annual Book of ASTM Standards, 2004b.
• - Kaliyan, N. and Morey, R.V., “Factors affecting strength and durability of densified biomass products”, Biomass Bioenergy, Vol. 33, 337-359, 2009.
• - Buravchuk, N.I. and Guryanova, O.V., “Production of fuel briquettes from anthracite fines”, Solid Fuel Chem., Vol. 48, No. 4, 260-26, 2014.
• - Tumuluru, J.S., Tabil, L.G., Song, Y., Iroba, K.L. and Meda, V., “Impact of process conditions on the density and durability of wheat, oat, canola, and barley straw briquettes”, Bioenergy Resource, Vol. 8, 388-401, 2015.
• - Zanjani, N.G., Moghaddam, A.Z. and Dorosti, S., “Physical and chemical properties of beet pulp/Mezino bituminous coal briquettes”, Energy Sources Part A, Vol. 35, 2173-2180, 2013.
• - Zhang, J.and Guo, Y., “Physical properties of solid fuel briquettes made from Caragana korshinskii Kom”, Powder Technology, Vol. 256, 293-299, 2014.
• - Chin, O.C. and Siddiqui, K. M., “Characteristics of some biomass briquettes prepared under modest die pressures”, Biomass Bioenergy, Vol. 18, 223-228, 2000.
• - Sun, B., Yu, J., Tahmasebi, A. and Han., Y., “An experimental study on binderless briquetting of Chinese lignite: Effects of briquetting conditions”, Fuel Processing Technology, Vol. 124, 243-248, 2014.
• - Ndiema, C.K.W., Manga, P.N. and Ruttoh, C.R., “Influence of die pressure on relaxation characteristics of briquetted biomass”, Energy Conversion and Management, Vol. 43, 2157-2161, 2002.
• - Mani, S., Tabil, L.G. and Sokhansanj, S., “Specific energy requirement for compacting corn stover”, Bioresource Technology, Vol. 97, No. 12, 1420-1426, 2006.
• - Taulbee, D., Patil, D.P., Honaker, R.Q. and Parekh, B.K., “Briquetting of coal fines and sawdust. Part:1 Binder and briquetting parameters evaluations”, Int. J. Coal Prep. Utilization, Vol. 29, 1-22, 2009.
• - Muazu, R.I. and Stegemann, J.A., “Effects of operating variables on durability of fuel briquettes from rice husks and corn cobs”, Fuel Processing Technology, Vol. 133, 137-145, 2015.
• - Mesfun, S., Lundgren, J., Grip, C.E., Toffolo, A., Nilsson, R.L.K. and Rova, U., Bioresource Technology, Vol. 166, 508-517, 2014.
• - Kumar, H. and Alén, R., “Recovery of aliphatic low-molecular-mass carboxylic acids from hardwood kraft black liquor”, Sep. Purif. Technology, Vol. 142, 293-298, 2015.