___

• 1. Burakovski, T., Wierzchon, T. (1999). Surface engineering of metals, (Ed) Ralph B., CRC Press LLC, London press, 1: 1-52. 2. Lo, K.H., Cheng, F.T. and Man, H.C. (2003).Cavitation erosion mechanism of S31600 stainless steel laser surface-modified with unclad WC, Materials Science and Engineering A, 357: 168–180. 3. Bourithis, L., Milonas, Ath. and Papadimitriou, G.D. (2003). Plasma transferred arc surface alloying of a construction steel to produce a metal matrix composite tool steel with TiC as reinforcing particles: Surface and Coatings Technology, 165: 286–295. 4. Lu, S.P., Kwon, O.Y. and Guo, Y. (2003). Wear behavior of brazed WC/NiCrBSi(Co) composite coatings, Wear, 254: 421–428. 5. Fauchais, P.L., Heberlein J.V.R. ve Boulos, M.I. (2014). Plasma-Transferred Arc Thermal Spray Fundamentals, Thermal Spray Fundamentals, 631–673. 6.Takano, E.H., Queiroz, D.D. and D’Oliveira, A.S.C.M. (2010). Evaluation of processing parameters on PTA hardfacing surfaces, Welding İnternational, 24: 1754-2138. 7. Yaedu, A.E., D'Oliveira, A.S.C.M. (2005). Cobalt based alloy PTA hardfacing on different substrate steels, Materials Science and Technology, 21: 459-466. 8. Sigolo, E., Soyama, J., Zepon, G., Kiminami, C.S., Botta, W.J. and Bolfarini, C. (2005). Wear resistant coatings of boron-modified stainless steels deposited by Plasma Transferred Arc, Surface & Coatings Technology, 302: 255-264. 9. Xibao, W., Hua, L. (1998). Metal powder thermal behaviour during the plasma transferred-arc surfacing process, Surface and Coatings Technology, 106: 156-161. 10. Bourithis, L., Papadimitriou, G.D. (2009). The effect of microstructure and wear conditions on the wear resistance of steel metal matrix composites fabricated with PTA alloying technique, Wear, 266: 1155-1164. 11. Xibao, W., Chunguo, L., Xiaomin, P., Libo, S. and Hong, Z. (2006).The powder's thermal behavior on the surface of the melting pool during PTA powder surfacing, Surface and Coatings Technology, 201: 2648-2654. 12. Krishna, B.V., Misra, V.N., Mukherjee, P.S. and Sharma, P. (2002). Microstructure and properties of flame sprayed tungsten carbide coatings, International Journal of Refractory Metals and Hard Materials, 20: 355-374. 13. Liu, X.B., Gu, Y.J. (2006). Plasma jet clad γ/Cr7C3 composite coating on steel, Materials Letters, 60: 577-580. 14. Skarvelis, P., Papadimitriou, G.D. Plasma transferred arc composite coatings with self lubricating properties. (2009). Based on Fe and Ti sulfides Microstructure and tribological behavior, Surface and Coatings Technology, 203: 1384-1394. 15. Bourithis, E., Tazedakis, A. and Papadimitriou, G. (2002). A study on the surface treatment of “Calmax” tool steel by a plasma transferred arc (PTA) process: Journal of Materials Processing Technology, 128: 169-177. 16. Huang, Z., Hou, Q. and Wang, P. (2008). Microstructure and properties of Cr3C2-modified nickel-based alloy coating deposited by plasma transferred arc process, Surface and Coatings Technology, 202: 2993-2999. 17. Liu, Y.F., Xia, Z.Y., Han, J.M., Zhang, G.L. and Yang, S.Z. (2006). Microstructure and wear behavior of (Cr,Fe)7C3 reinforced composite coating produced by plasma transferred arc weld-surfacing process, Surface and Coatings Technology, 201: 863-867. 18. Pandey, K.P., Ranjit, S. (2016). Experimental Investigation of Surface Properties of Hardox 400 Hardfaced with WC, International Journal of Engineering Research & Technology, 5(5): 622-626. 19. Xibao, W., Xiaofeng, W. and Zhongquan, S. (2005). The composite Fe–Ti–B–C Coatings by PTA powder surfacing process, Surface and Coatings Technology, 192: 257-262. 20. Yao, M.X., Wu, J.B.C., Xu, W. and Liu, R. (2005). Metallographic study and wear resistance of a high-C wrought Co-based alloy Stellite 706K, Materials Science and Engineering A, 407: 291-298. 21. Tabur, M. (2008).Examınatıon Of The Abrasıve Wear Behavıour Of Boron Carbıde Coated AISI 8620 And Hardox 400 Steels. MSc Thesis, Gazi Unıversıty. 173-176. 22. Zhang, L., Sun, D., Yu, H. and Li, H. (2007). Caracteristic of Fe-based Alloy Coating Producud By Plasma Caldding Precess, Materials Science and Engineering A, 457: 319-324. 23. Liu, Y.F., Han, J.M., Li, R.H., Li, W.J., Xu, X.Y., Wang. J.H. and Yang, S.Z. (2006). Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/γ-Fe ceramal composite coating, Applied Surface Science, 252: 7539-7544. 24. Gür, A. K., Kaya, S. (2017), “Abrasive wear resistance optimization of three different carbide coatings by the Taguchi method”, Materials Testing, 59(5): 450-455. 25. Konovalov, S., Kormyshev, V., Gromov, V. and Ivanov, Yu. (2016). Metallographic Examination of Forming Improved Mechanical Properties via Surfacing of Steel Hardox 450 with Flux Cored Wire, Materials Science Forum, 870: 159-162. 26. Mindivan, H. (2013). Effects of Combined Diffusion Treatments on the Wear Behaviour of Hardox 400 Steel, Procedia Engineering, 68: 710-715. 27. Yildiz, T., Gür, A.K. (2011). Microstructural characteristic of N2 shielding gas in coating FeCrC composite to the surface of AISI 1030 steel with PTA method, Archives of Metallurgy and Materials, 56(3): 723-729. 28. Gürgenç, T., Özel, C. (2016). Investigation of Microstructure and Mechanical Properties of FeCrC, FeB and FeW Alloys Coated AISI 1020 Steel Using PTA Method, Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 28(2): 221-232. 29. Yılmaz, O., Ozenbaş, M. and Korkut M.H. (2002). Microstructural Characteristics of Gas Tungsten Arc Synthesised Fe-Cr-Si-C Coating, Material Science and Technology, 18: 1209-1216. 30. Liu ,Y.F., Xia, Z.Y., Han, J.M., Zhang, G.L. and Yang, S.Z. (2006). Microstructure and wear behavior of (Cr,Fe)7C3 Reinforced Composite Coating Produced by Plasma Transferred Arc Weld-Surfacing Process, Surface and Coating Technology, 201: 863–867. 31. Gür, A.K. (2013). Investigating the wear behaviour of FeCrC/B4C powder alloys coating produced by plasma transferred arc weld surfacing using the Taguchi method, Materials Testing. 55: 462-467. 32. Gür, A.K, Ozay, C., Orhan, A., Buytoz, S., Çalıgülü, U and Yigitturk, N. (2014). Wear Properties of Fe-Cr-C and B4C Powder Coating on AISI 316 Stainless Steel Analyzed by the Taguchi Method, Materials Testing, 56: 393-398. 33. Gür, A.K., Yildiz, T. (2008). The Effect at Wear Behavior Of Coating Layer of Proportion Gases N2, Technological Applied Sciences, 3(4): 627-635.