Electromagnetic Wave Absorption Performance of Carbon Nanocoils by Using Mixed Ferrites as Catalyst

Electromagnetic Wave Absorption Performance of Carbon Nanocoils by Using Mixed Ferrites as Catalyst

Rapid development of electronic devices and advanced technology creates more electromagnetic wave interference that is harmful to human health as well as equipment. Thus, the use of electromagnetic (EM) wave absorber becomes more focused among researchers and attracted more public attention. Carbon nanocoils (CNs) have been introduced due to its chemical, physical and mechanical properties that can produce lightweight, wide absorption range and strong absorption. This research highlights the use of mixed ferrites (Fe3O4 and CoFe2O4) as catalyst to grow carbon nanocoils. Different weight percentages of Fe3O4 and CoFe2O4 were mixed to grow carbon nanocoils and further used as fillers to be incorporated into epoxy matrix. The morphological study of synthesized carbon nanocoils and reflection loss of the prepared polymer composites were studied in the range of X-band and Ku-band at thickness 1 mm, 2 mm, and 3 mm. The reflection loss achieved shows that mixed ferrites as catalyst to grow carbon nanocoils have great potential to be used as an excellent EM wave absorbers at low thickness.

___

  • Rodriguez, N. M., Kim, M. S., Fortin, Mochida, F., I., Baker, R. T. K., (1997) Carbon deposition on iron–nickel alloy particles, Appl Catal A: General, vol. 148(2), pp. 265–82.
  • Motojima, S., Itoh, Y., Asakura, S., Iwanaga, H., (1995) Preparation of micro-coiled carbon fibers by metal powder-activated pyrolysis of acetylene containing a small amount of sulphur compounds, J Mater Sci, vol. 30(20), pp. 5049–55.
  • Singh, B. P., Saket, D. K., Singh, A. P., Pati S., Gupta, T. K., Singh, V. N., Dhakate, S. R., Dhawan, S. K., Kotnala, R. K., Mathur, R. B., (2015) Microwave shielding properties of Co/Ni attached to single walled carbon nanotubes, Journal of Materials Chemistry A, vol. 3(13203), pp. 1 -8.
  • Zhang, M., Nakayama, Y., Pan, L. J., (2000) Synthesis of carbon tubule nanocoils in high yield using iron tin oxide as catalyst, Jpn J Appl Phys, vol. 39(12A), pp. 1242–1244.
  • Tang, N. J., Zhong, W., Gedanken, A., Du, Y. W., (2006) High magnetization helical carbon nanofibers produced by nanoparticle catalysis, J Phys Chem B, vol. 110(24), pp. 11772–11774.
  • Tang, N. J., Yang, Y., Lin, K., Zhong, W., Chaktong, A., Du, Y. W., (2008) Synthesis of plait-like carbon nanocoils in ultrahigh yield, and their microwave absorption properties, J Phys Chem C, vol. 112(27), pp. 10061–10067, 2008.
  • Motojima, S., Hoshiya, S., Hishikawa, Y., (2003) Electromagnetic wave absorption properties of carbon microcoils /PMMA composite beads in W bands, Carbon, vol. 41, pp. 2658-2660.
  • Zhao, D. L., Shen, Z. M., (2008) Preparation and microwave absorption properties of carbon nanocoils, Mater. Lett., vol. 62, pp. 3704–3706.
  • Tang, N. J., Zhong, W., Au, C. T., Yang, Y., Han, M. G., Lin, K. J., Du, Y. W., (2008) Synthesis, microwave electromagnetic, and microwave absorption properties of twin carbon nanocoils, J. Phys. Chem. C, vol. 112, pp. 19316–19323.
  • Hikita, M., Bradford, R., Lafdi, K., (2014) Growth and Properties of Carbon Microcoils and Nanocoils, Crystals, vol. 4, pp. 66-489.
  • Somiya, S., (2013). Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties, Elsevier: Netherlands.
  • Das, R., Hamid, S. B. A., Alia, M. E., Ramakrishnab, S., Yongzhib, W., (2015) Carbon Nanotubes Characterization by X-ray Powder Diffraction – A Review, Current Nanoscience, vol. 11, pp. 23 – 35.
  • Cheng, J., Zhang, X., Luo, Z., Liu, F., Ye, Y., Yin, W., Liu, W., Han, Y., (2006) Carbon nanotube synthesis and parametric study using CaCO3 nanocrystals as catalyst support by CVD, Materials Chemistry and Physics, vol. 95(1), pp. 5–11.
  • Qin, F., Brosseau, C., (2012) A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles, J Appl Phys., vol. 111, 061301.
  • Che, R. C., Zhi, C. Y., Liang, C. Y., Zhou, X. G., (2006) Fabrication and microwave absorption of carbon nanotubes CoFe2O4 spinel Nanocomposite, Applied Physics Letters, vol. 88 (3) 033105.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 1307-9085
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 2008
  • Yayıncı: Erzincan Binali Yıldırım Üniversitesi, Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

Impact of Different Ambient Temperatures on Egg-Laying and Hatching Parameters in Japanese Quail

Hüseyin Baki CIFTCI

Buckling Analysis of Functionally Graded Beams Using the Finite Element Method

Muhittin TURAN, Mahmut İlter HACIOĞLU

Modeling the Effect of Pour Height, Casting Temperature and Die Preheating Temperature on the Fluidity of Different Section Thicknesses in Permanent Mold Casting of Al12Si Alloys

Yunus Emre ASAN, Murat ÇOLAK

Electromagnetic Wave Absorption Performance of Carbon Nanocoils by Using Mixed Ferrites as Catalyst

Fadzıdah MOHD IDRIS, Hatika KACO, Siti Munirah MOHD, Nurhidaya MOHAMAD JAN, Haslinawati MOHD MUSTAPHA, Zanariah MOHD IDRİS

Effect of Different Roasting Methods on Some Properties of Walnut Kernels

Naciye KUTLU KANTAR, Tuğba ELBİR, Özlem YILMAZ, Aybike KAMİLOĞLU

Static Capacity Curves of Reinforced Concrete Structures Exposed to High Temperature Effects

Elif Nazlı KÜÇÜK, Oğuz Akın DÜZGÜN

Attitudes and Behaviors of Turkish Consumers Regarding the Olive Oil Consumption

Ümit ALTUNTAŞ, İsmail GÜZEL, Özlem YILMAZ, Sibel ULUATA, Beraat ÖZÇELİK

Koyun Yoğurduna Farklı Oranlarda Ananas İlavesinin Antioksidan Aktivite, 5-Hidroksimetilfurfural (HMF) İçeriği ve ABT-2 Probiyotik Kültür Gelişimi Üzerine Etkisi

Murat Emre TERZİOĞLU, Neslihan YILDIZ KÜÇÜK, İhsan BAKIRCI

Makine Öğrenmesi Yöntemleri ile Konut Talep Tahmini

Şeyma EMEÇ, Duygu TEKİN

Analysis of Some Tribological Properties of Hazelnut Oil in Gasoline Engines

Arzu KEVEN, Rabi KARAALİ