Analysis of Some Tribological Properties of Hazelnut Oil in Gasoline Engines

Analysis of Some Tribological Properties of Hazelnut Oil in Gasoline Engines

In this article, oil obtained from vegetable was used to lubricate a single-cylinder 2-stroke gasoline engine as lubricating oil, and tribological function of the obtained oil was investigated. To investigate the tribological functions of the lubricating oils, a 2-stroke single-cylinder gasoline engine was used. For mineral oil and hazelnut oil, the test engine was run for 100 hours for each one and were used to lubricate in the test engine as lubricating oils. Samples were prepared for the aim of the determining the wear on the cylinder surface, and also EDS (Energy Dispersive Spectrograph) analysis were obtained. The results of the analyses showed that, the wear on the cylinder surface were increased in the studies using hazelnut oil and the C content of the cylinder sample increased compared to the study with mineral oil. Al element was detected in the cylinder sample in the hazelnut study, that the reason for this, is the transport of the Al element during the friction event in the piston material to the cylinder surface.

___

  • [1] Şanlı H., Çanakçı, M., Alptekin E., Türkcan, A., Özsezen, A.N. (2015). Effects of waste frying oil-based methyl and ethyl ester biodiesel fuels on the performance, combustion and emission characteristics of a DI diesel engine. Fuel, vol. 159, pp. 179-187.
  • [2] Alptekin E., Çanakçı M., Özsezen,A.N., Türkcan A., Şanlı, H. (2015). Using waste animal fat based biodiesels–bioethanol–diesel fuel blends in a DI diesel engine. Fuel, vol. 157, pp. 245-254.
  • [3] Alptekin E., Çanakçı M., Şanlı H. (2014). Biodiesel production from vegetable oil and waste animal fats in a pilot plant. Waste Management, vol. 34, pp. 2146-2154.
  • [4] Özer, S. (2020). İki Zamanlı Bir Motorda Benzin/Alkol Karışımlarının Yakıt Olarak Kullanılmasının Gürültü ve Titreşime Etkisi. Engineering Science (NWSAENS), 1A0455, 15(2), 113-123.
  • [5] Vural, E., Özer, S., Akçay M. (2015). Tasarlanan 2 Zamanlı 3 Silindirli İçten Yanmalı Bir Dizel Motorunun, Biyodizel Karışımlarının, Performans ve Emisyonlarına Etkisinin Simülasyon Analizi. 14th International Combustion Symposium (INCOS2018) 25-27.
  • [6] Tan, Y.C., Ripin, Z.M. (2010). Frictional behavior of piston rings of small utility two stroke engine under secondary motion of piston. Tribology International, 44, 592-602.
  • [7] Jayadas, N.H., Nair, K.P., Aithkumar G. (2007). Tribological evaluation of coconut oil as an environment-friendly lubricant. Tribology International, 40, 350-354.
  • [8] Kulkarni, M.G., Dalai, A.K., Bakhshi, N.N. (2007). Transesterification of canola oil in mixed methanol/ethanol system and use of esters as lubricity additive. Bioresource Technology, 98, 2027-2033.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 1307-9085
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 2008
  • Yayıncı: Erzincan Binali Yıldırım Üniversitesi, Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

Attitudes and Behaviors of Turkish Consumers Regarding the Olive Oil Consumption

Ümit ALTUNTAŞ, İsmail GÜZEL, Özlem YILMAZ, Sibel ULUATA, Beraat ÖZÇELİK

Buckling Analysis of Functionally Graded Beams Using the Finite Element Method

Muhittin TURAN, Mahmut İlter HACIOĞLU

Static Capacity Curves of Reinforced Concrete Structures Exposed to High Temperature Effects

Elif Nazlı KÜÇÜK, Oğuz Akın DÜZGÜN

Koyun Yoğurduna Farklı Oranlarda Ananas İlavesinin Antioksidan Aktivite, 5-Hidroksimetilfurfural (HMF) İçeriği ve ABT-2 Probiyotik Kültür Gelişimi Üzerine Etkisi

Murat Emre TERZİOĞLU, Neslihan YILDIZ KÜÇÜK, İhsan BAKIRCI

Analysis of Some Tribological Properties of Hazelnut Oil in Gasoline Engines

Arzu KEVEN, Rabi KARAALİ

Impact of Different Ambient Temperatures on Egg-Laying and Hatching Parameters in Japanese Quail

Hüseyin Baki CIFTCI

Makine Öğrenmesi Yöntemleri ile Konut Talep Tahmini

Şeyma EMEÇ, Duygu TEKİN

Modeling the Effect of Pour Height, Casting Temperature and Die Preheating Temperature on the Fluidity of Different Section Thicknesses in Permanent Mold Casting of Al12Si Alloys

Yunus Emre ASAN, Murat ÇOLAK

Electromagnetic Wave Absorption Performance of Carbon Nanocoils by Using Mixed Ferrites as Catalyst

Fadzıdah MOHD IDRIS, Hatika KACO, Siti Munirah MOHD, Nurhidaya MOHAMAD JAN, Haslinawati MOHD MUSTAPHA, Zanariah MOHD IDRİS

Effect of Different Roasting Methods on Some Properties of Walnut Kernels

Naciye KUTLU KANTAR, Tuğba ELBİR, Özlem YILMAZ, Aybike KAMİLOĞLU