Ölçülerin Dezenfeksiyonu Ve Dezenfektanların Ölçü Üzerindeki Etkileri

Enfeksiyöz mikroorganizmaların hasta, hekim ve yardımcı personel arasındaki geçişi çapraz enfeksiyon olarak tanımlanır. Protetik diş tedavisinde kullanılan materyaller ve uygulamalar nedeniyle, protez uzmanları, hemşireler ve diş teknisyenleri, hastalardan bulaşabilecek birçok enfeksiyonla karşı karşıya kalmaktadır. Protetik işlemler sırasında hasta ağzından alınan ölçü maddelerinin dezenfekte edilmeden laboratuvara gönderilmesi klinik ile laboratuvar arasında çapraz kontaminasyona neden olur. Kontaminasyonun önlenebilmesi amacıyla, hastalardan alınan ölçülerin dezenfekte edilerek teknisyenlere iletilmesi önerilmektedir. Ancak kullanılacak dezenfeksiyon materyali ve yöntemleri, ölçü materyalinin özelliklerini etkileyebilmektedir. Bu derlemenin amacı, ölçülerin dezenfeksiyonu ve dezenfektanların ölçü üzerindeki etkilerinin, konu ile ilgili yapılan çalışmaların ışığında incelenmesidir

Disinfection Of Dental Impressions And Effects Of Disinfectants On Dental Impressions

The transfer of infectious microorganisms between patient, doctor and auxiliary staff is called ‘cross infection’. Due to the applications and materials used in prosthetic treatments, prosthodontists, nurses and dental technicians come up against several infections which can be transmitted from patients. The delivery of dental impressions, obtained from patients during prosthetic applications, without disinfection leads to cross contamination between clinic and dental laboratory. To prevent contamination, disinfection of dental impressions is recommended. However, disinfection methods and disinfectants can affect the characteristics of dental impression materials. The aim of this paper is to review the disinfection of dental impressions and the effects of disinfectants on dental impressions in the light of previous studies

PDF

___

1. Akçaboy C, Suca S. Ölçü maddeleri ve klinik uygulamaları. 1. baskı, Gazi Üniversitesi Diş Hekimliği Fakültesi, Ankara, 1993, 129-133.
2. Akpınar YZ, Uzun İH, Yılmaz B, Tatar N. Protetik tedavilerde çapraz enfeksiyon kontrolü. Atatürk Üniv. Diş Hek. Fak. Derg. 2013; Suppl 7: 142-149.
3. Al-Jabrah O, Al-Shumailan Y, Al-Rashdan M. Antimicrobial effect of 4 disinfectants on alginate, polyether, and polyvinyl siloxane impression materials. Int J Prosthodont. 2007; 20: 299-307.
4. Almortadi N, Chadwick RG. Disinfection of dental impressions - compliance to accepted standards. Br Dent J. 2010; 209: 607-611.
5. Chau VB, Saunders TR, Pimsler M, Elfring DR. Indepth disinfection of acrylic resins. J Prosthet Dent. 1995; 74: 309-313.
6. Matalon S, Eini A, Gorfil C, Ben-Amar A, Slutzky H. Do dental impression materials play a role in cross contamination? Quintessence Int. 2011; 42: e124-130.
7. Infection control recommendations for the dental office and the dental laboratory. ADA Council on Scientific Affairs and ADA Council on Dental Practice. J Am Dent Assoc. 1996; 127: 672-680.
8. Centers for Disease Control and Prevention. Guidelines for Infection Control in Dental Health Care Settings 2003. MMWR. 2003; 52: 1-61.
9. Sofou A, Larsen T, Fiehn NE, Owall B. Contamination level of alginate impressions arriving at a dental laboratory. Clin Oral Investig. 2002; 6: 161-165.
10. Arıkan S. Temizlik, dezenfeksiyon ve sterilizasyon. Hastane İnfeksiyonları Dergisi. 1997; 1: 61-68.
11. Günaydın M. Dezenfeksiyon kontrolü: dezenfektan solüsyonlar nasıl seçilmeli, nasıl denetim yapılmalıdır? Hastane İnfeksiyonları Dergisi. 2003; 7: 189-194.
12. Perçin D, Esen Ş. Güncel dezenfektanlar ve dezenfeksiyon uygulamalarındaki sorunlar. ANKEM Derg 2009; 23: 89-93.
13. Abbasoğlu U. Dezenfektanlar: Sınıflama ve Amaca Uygun Kullanım Alanları. 6. Ulusal Sterilizasyon Dezenfeksiyon Kongresi. 2009.
14. Centers for Diseases Control and Prevention: Guidelines for environmental infection control in health care facilities. Recommendations of CDC and the Healthcare Infection Control Practices Advisory Committee (HICPAC), CDC, Atlanta GA (2003).
15. Egusa H, Watamoto T, Matsumoto T et al. Clinical evaluation of the efficacy of removing microorganisms to disinfect patient-derived dental impressions. Int J Prosthodont. 2008; 21: 531-538.
16. Değer Y. Ölçü maddelerinin dezenfeksiyonu: literatür derlemesi. Turkiye Klinikleri J Dental Sci 2011; 17: 177-185.
17. Kotsiomiti E, Tzialla A, Hatjivasiliou K. Accuracy and stability of impression materials subjected to chemical disinfection- a literature review. J Oral Rehabil. 2008; 35: 291-299.
18. Decontamination and Disinfection [internette]. 2008 [02.04.2014 okundu]. elektronik adresi: http://ehs.columbia.edu/decon.html
19. Beyerle MP, Hensley DM, Bradley DV, Schwartz RS, Hilton TJ. Immersion disinfection of irreversible hydrocollodid impressions with sodium hypochlorite. Part 1: Microbiology. Int J Prosthodont 1994; 7: 234- 238.
20. McNeill MRJ, Coulter WA, Hussey DL. Disinfection of irreversible hydrocolloid impressions. A comperative study. Int J Prosthodont 1992; 5: 563- 567.
21. Gerhardt DE, Sydiskis RJ. Impression materials and virus. J Am Dent Assoc. 1991; 122: 51-54.
22. Surna R, Junevicius J, Rutkauskas E. In vitro investigation of the integration depth of oral fluids and disinfectants into alginate impressions. Stomatologija. 2009; 11: 129-134.
23. Owen CP, Goolam R. Disinfection of impression materials to prevent viral cross contamination: a review and a protocol. Int J Prosthodont. 1993; 6: 480-494.
24. Sofou A, Larsen T, Owall B, Fiehn NE. In vitro study of transmission of bacteria from contaminated metal models to stone models via impressions. Clin Oral Investig. 2002; 6: 166-170.
25.Johnson GH, Chellis KD, Gordon GE, Lepe X. Dimensional stability and detail reproduction of irreversible hydrocolloid and elastomeric impressions disinfected by immersion. J Prosthet Dent. 1998; 79: 446-453.
26. Özdal Uİ, Gökçe S, Dalkız M, Özen J, Beydemir B. Kimyasal antiseptiklerin ve dezenfeksiyon yöntemlerinin irreversibl hidrokolloid ölçü maddesinin (alginat) boyutsal stabilitesine etkisinin araştırılması. Gülhane Tıp Dergisi 2004; 46: 136-143.
27. Ishida H, Nahara Y, Tamamoto M, Hamada T. The fungicidal effect of ultraviolet light on impression materials. J Prosthet Dent. 1991; 65: 532-535.
28. Atabek D, Alaçam A, Tüzüner E, Polat S, Sipahi AB. In-Vivo Evaluation of Impression Material Disinfection with Different Disinfectant Agents. Hacettepe Diş Hekimliği Fakültesi Dergisi 2009; 33: 52-59.
29. Ghahramanloo A, Sadeghian A, Sohrabi K, Bidi A. A microbiologic investigation following the disinfection of irreversible hydrocolloid materials using the spray method. J Calif Dent Assoc. 2009; 37: 471-477.
30. Haralur SB, Al-Dowah OS, Gana NS, Al-Hytham A. Effect of alginate chemical disinfection on bacterial count over gypsum cast. J Adv Prosthodont. 2012; 4: 84-88.
31. Estafanous EW, Palenik CJ, Platt JA. Disinfection of bacterially contaminated hydrophilic PVS impression materials. J Prosthodont. 2012; 21: 16- 21.
32. Giammanco GM, Melilli D, Rallo A, Pecorella S, Mammina C, Pizzo G. Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions. New Microbiol. 2009; 32: 167-172.
33. Turhan Bal B, Yilmaz H, Aydin C, Al FD, Sultan N. Efficacy of various disinfecting agents on the reduction of bacteria from the surface of silicone and polyether impression materials. Eur J Prosthodont Restor Dent. 2007; 15: 177-182.
34. Larsen T, Fiehn NE, Peutzfeldt A, Owall B. Disinfection of dental impressions and occlusal records by ultraviolet radiation. Eur J Prosthodont Restor Dent. 2000; 8: 71-74.
35. Bhasin A, Vinod V, Bhasin V, Mathew X, Sajjan S, Ahmed ST. Evaluation of effectiveness of microwave irradiation for disinfection of silicone elastomeric impression material. J Indian Prosthodont Soc. 2013; 13: 89-94.
36. Hiraguchi H, Kaketani M, Hirose H, Yoneyama T. The influence of storing alginate impressions sprayed with disinfectant on dimensional accuracy and deformation of maxillary edentulous stone models. Dent Mater J. 2010; 29: 309-315.
37. Hiraguchi H, Kaketani M, Hirose H, Yoneyama T. Effect of immersion disinfection of alginate impressions in sodium hypochlorite solution on the dimensional changes of stone models. Dent Mater J. 2012; 31: 280-286.
38. Shambhu HS, Gujjari AK. A study on the effect on surface detail reproduction of alginate impressions disinfected with sodium hypochlorite and ultraviolet light - an in vitro study. J Indian Prosthodont Soc. 2010; 10: 41-47.
39. Guiraldo RD, Borsato TT, Berger SB, Lopes MB, Gonini-Jr A, Sinhoreti MA. Surface detail reproduction and dimensional accuracy of stone models: influence of disinfectant solutions and alginate impression materials. Braz Dent J. 2012; 23: 417-421.
40. Amalan A, Ginjupalli K, Upadhya N. Evaluation of properties of irreversible hydrocolloid impression materials mixed with disinfectant liquids. Dent Res J (Isfahan). 2013; 10: 65-73.
41. Alwahab Z. Comparison of antimicrobial activities and compressive strength of alginate impression materials following disinfection procedure. J Contemp Dent Pract. 2012; 13: 431-435.
42. Olsson S, Bergman B, Bergman M. Agar impression materials, dimensional stability and surface detail sharpness following treatment with disinfectant solutions. Swed Dent J. 1987; 11: 169-177.
43. Hiraguchi H, Kaketani M, Hirose H, Kikuchi H, Yoneyama T. Dimensional changes in stone casts resulting from long-term immersion of addition-type silicone rubber impressions in disinfectant solutions. Dent Mater J. 2013; 32: 361-366.
44. Shetty SR, Kamat G, Shetty R. Wetting characteristics of addition silicon materials subjected to immersion disinfection--an in-vitro study. Eur J Prosthodont Restor Dent. 2013; 21: 98-104.
45. Surendra GP, Anjum A, Satish Babu CL, Shetty S. Evaluation of dimensional stability of autoclavable elastomeric impression material. J Indian Prosthodont Soc. 2011; 11: 63-66.
46. Al Kheraif AA. Surface roughness of polyvinyl siloxane impression materials following chemical disinfection, autoclave and microwave sterilization. J Contemp Dent Pract. 2013; 14: 483-487.
47. Walker MP, Rondeau M, Petrie C, Tasca A, Williams K. Surface quality and long-term dimensional stability of current elastomeric impression materials after disinfection. J Prosthodont. 2007; 16: 343-351.
48. Yilmaz H, Aydin C, Gul B, Yilmaz C, Semiz M. Effect of disinfection on the dimensional stability of polyether impression materials. J Prosthodont. 2007; 16: 473-479.
49. Shetty S, Kamat G, Shetty R. Wettability changes in polyether impression materials subjected to immersion disinfection. Dent Res J (Isfahan). 2013; 10: 539–544.
50. Ahmad S, Tredwin CJ, Nesbit M, Moles DR. Effect of immersion disinfection with Perform-ID on alginate, an alginate alternative, an addition-cured silicone and resultant type III gypsum casts. Br Dent J. 2007; 202: E1; discussion 36-37.
51. Suprono MS, Kattadiyil MT, Goodacre CJ, Winer MS. Effect of disinfection on irreversible hydrocolloid and alternative impression materials and the resultant gypsum casts. J Prosthet Dent. 2012; 108: 250-258.