Mehmet Akif ERDEN, Özgür ÇELİKKIRAN, Samet BARLAK, Berkay ADALI

Toz Metalurjisi İle Üretilen Nb-V Mikroalaşim Çeliğine Vanadyum İlavesinin Mikroyapi Mekaniksel Özellikleri Üzerine Etkisi

Bu çalışmada toz metalurjisi yöntemiyle Fe matris içerisine sabit oranda grafit ve niyobium ilavesinin yanı sıra farklı oranlarda vanadyum elementinin (% Ağırlık olarak 0-0,025-0,05-0,1-0,3-0,5-1-3) katılmasıyla istenilen bileşimde çelik malzeme toz karışım olarak elde edilmiştir. Elde edilen tozlar çekme numunesi şeklinde tasarlanan kalıpta 700 MPa presleme basıncında sıkıştırılarak atmosfer kontrollü tüp fırında argon atmosferinde 1400ͦC’de sinterlenerek çelik üretimi gerçekleştirilmiştir. Farklı V oranlarına sahip Nb-V mikroalaşımlı çelik numunelerin mekanik özellikleri çekme ve mikrosertlik testi ile analiz edilmiştir. Toz metal çeliklerin mikroyapısı optik mikroskop ile karakterize edilmiştir. Sonuçlar % ağırlık olarak % 1 V ilave edilmiş TM çelik numunelerin en yüksek akma ve çekme dayanımına sahip olduğu göstermektedir. V miktarı %1’dan %3’e çıkması ile akma ve çekme dayanımında azalma gözlenmiştir.

Anahtar Kelimeler:

Toz metalürjisi, Nb-V mikroalaşımlı çelikler, Mikroyapı, Mekanik Özellikler

The Effect On Microstructure Mechanical Properties Of Vanadıim In Nb-V Microalloyed Steel Produced By Powder Metallurgy

In this study, the addition of vanadium element (0-0,025-0,05-0,1-0,3-0,5-1-3% by weight) at different ratios as well as the addition of graphite and niobium in the fixed matrix into the Fe matrix by powder metallurgy method the steel material in the composition is obtained as a powder mixture. The obtained powders were compacted at 700 MPa pressing pressure in the form of drawn specimen and steel production was performed by sintering at 1400 ° C in argon atmosphere in an atmosphere controlled tube furnace. The mechanical properties of Nb-V microalloyed steel specimens with different V ratios were analyzed by tensile and microhardness test. Microstructure of powder metal steels is characterized by optical microscope. The results show that the TM steelsamples added with 1% V by weight have the highest yield and tensile strength. With increasing the V content from 1% to 3%, a decrease in yield and tensile strength was observed.

Keywords:

Powder metallurgy Nb-V Microalloyed Stell, V, Micro structure, Tensile strength,

PDF

___

[1] M. A. Erden, “The Effect of the Sintering Temperature and Addition of Niobium and Vanadium on the Microstructure and Mechanical Properties of Microalloyed PM Steels,” Metals, vol. 7, no. 9, pp. 329, 2017.
[2] H. Demir, H. B. Ulaş ve M. Zeyveli, “Stavax esr çeliğinin yüzey pürüzlülüğü ve kesme kuvvetleri açısından değerlendirilmesi,”5. Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), Karabük, Türkiye, ss. 1270-1273, 2009.
[3] M. Türkmen, “Effect of carbon content on mıcrostructure and mechanıcal propertıes of powder metallurgy steels,” Powder Metallurgy and Metal Ceramics, vol. 55, pp. 3-4, 2016. 636 [4] M. A. Erden, S. Gündüz, M. Türkmen and H. Karabulut, “The effect of V addition on the microstructure and mechanical properties of low carbon microalloyed powder metallurgy steels,” Materials Testing, vol. 58, no. 5, pp. 433-437, 2016.
[5] İ. Uygur, “Fe-Cu-C çeliklerine mangan ilavesinin mekanik özelliklere etkisi”, Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, c. 22, s. .3, ss. 325-330, 2007.
[6] S. Gündüz, M. A. Erden, M. Türkmen and H. Karabulut, “The influence of vanadium and titanium on the mechanical properties of microalloyed PM steel,” Powder Metallurgy and Metal Ceramıcs, vol. 55, no. 5, pp. 277-287, 2017.
[7] T. Gladman and J. H. Woodhead, “The accuracy of point counting in metallographic investigations,” Journal of Iron and Steel Research, vol. 194, pp. 184‐193, 1960. [8] S. Sarıtaş, M. Türker ve N. Durlu, Toz metalürjisi ve parçacıklı malzeme işlemleri, 1. Baskı, Ankara, Türkiye: Türk Toz Metalurjisi Yayınları, 2007, böl. 1, pp. 2‐34.
[9] C. Schade, T. Murphy, A. Lawley and R. Doherty, “Microstrucure and mechanical properties of microalloyed PM steels,” International Journal of Powder Metallurgy, vol.48, no.6, pp.51-5, 2012. [10] C. Schade, T. Murphy, A. Lawley and R. Doherty, “Microstructure and mechanical properties of PM steels alloyed with silicon and vanadium,” International Journal of Powder Metallurgy, vol.48, no.6, pp.41-48, 2012.
[11] S. Gündüz, M. A. Erden, H. Karabulut, M. Türkmen, “Effect of the Addition Niobium and Aluminium on the Microstructure and Mechanical Properties of the Micro-Alloyed PM Steels,” Materials and Technology, vol. 50, no. 5, pp. 641–648, 2016.
[12] Ş. Okumuş and H. Karabulut, “Effect of quench and strain aging on the mechanical properties of low carbon microalloyed steels,” Materials Testing, vol.57, no.4, pp.289-295, 2015.
[13] M. A. Erden, “Effect of C Content on Microstructure and Mechanical Properties of Nb-V Added Microalloyed Steel Produced by Powder Metallurgy Method,” European Journal of Science and Technology, vol. 5, no. 9, 44-47, 2016.
[14] T. Gladman, “The physical metallurgy of microalloyed steels,” Mater. Sci. Technol, vol. 15, pp. 30–36, 1999.
[15] V. Ollilainen, W. Kasprzak and L. Hollapa “The effect of slicon, vanadium and nitrogen on the microstructure and hardness of air cooled medium carbon low alloy steel,” Journal of Metarials Processing Technology, vol. 134, pp. 405‐412, 2003.
[16] D. Özdemirler, S. Gündüz and M. A. Erden, “Influence of NbC Addition on the Sintering Behaviour of Medium Carbon PM Steels,” Metals, vol. 7, no.4, pp. 121-132, 2017.
[17] D. T. Llewellyn and R.C. Hudd, Steels: Metallurgy and Applications, 3rd ed., Oxford, UK: Reed Educational and Professional Publishing Ltd., pp. 15–40, 1998.