___

• Badisch, E., Mitterer, C., (2003). Abrasive wear of high speed steels: Influence of abrasive particles and primary carbides on wear resistance, Tribology International, 36(10), 765-770.
• Balasubramanian, V., Varahamoorthy, R., Ramachandran, C.S., Muralidharan, C., (2009). Selection of Welding Process for Hardfacing on Carbon Steels Based on Quantitative and Qualitative Factors, International Journal of Advanced Manufacturing Technology, 40, 887- 897.
• Bodnar, R.L., Hansen, S.S., (1994). Effects of austenite grain size and cooling rate on Widmanstätten ferrite formation in low-alloy steels, Metallurgical and Materials Transactions A, 25(4), 665-675.
• Birger, E.M., Moskvitin, G.V., Polyakov, A.N., Arkhipov, V.E., (2011). Industrial laser cladding: current state and future, Welding International, 25(3), 234-243.
• Buytoz, S., Orhan, A., Gur, A. K., Caligulu, U., (2013). Microstructural Development of Fe–Cr–C and B 4 C Powder Alloy Coating on Stainless Steel by Plasma-Transferred Arc Weld Surfacing, Arabian Journal for Science and Engineering, 38(8), 2197-2204.
• Cay, V.V., Ozan, S., Gök, M.S., (2011). The effect of hydrogen shielding gas on microstructure and abrasive wear behavior in the surface modification process using the tungsten inert gas method, Journal of Coatings Technology and Research, 8(1), 97-105.
• Chen, J.M., Chun, G., Zhou J.S., (2012). Microstructure and Tribological Properties of Laser Cladding Fe-Based Coating on Pure Ti Substrate, Transactions of Nonferrous Metals Society of China, 22(9), 2171–2178.
• Chandrasekar, M., Shivalingappa, D., Channankaiah. D., (2016). Recent Developments in Cladding Process – A Review, International Journal for Innovative Research in Science & Technology, 2(10), 310-315.
• Dai, S., Zuo, D.W., Fang, C., Zhu, L., Cheng, H., Gao, Y.X., Li, W.W., (2016). Characteration of Laser Cladded Fe-Mn-Cr Alloy Coatings Modified by Plasma Nitriding, Materials Transactions, 57(4), 539-543.
• Du, B., (2013). Fabrication of In-situ Fe-Ti-B composite coating by laser cladding, Surface Review and Letters, 20(3-4), 1-8.
• Fu, Z.K., Ding, H.H., Wang, W.J., Liu, Q.Y., Guo, J., Zhu, M.H., (2015). Investigation on microstructure and wear characteristic of laser cladding Fe-based alloy on wheel/rail materials, Wear, 330, 592-599.
• Gasik, M., eds. (2013). Handbook of ferroalloys: theory and technology, Chapter 12: Technology of Molybdenum Ferroalloys, 387-396, Butterworth- Heinemann.
• Luo, K.Y., Xu, X., Zhao, Z., Zhao, S.S., Cheng, Z.G., Lu, J.Z., (2019). Microstructural evolution and characteristics of bonding zone in multilayer laser cladding of Fe-based coating, Journal of Materials Processing Technology, 263, 50-58.
• Luyckx, S., Love, A., (2004). The relationship between the abrasion resistance and the hardness of WC-Co alloys, Journal of the South African Institute of Mining and Metallurgy, 104(10), 579- 582.
• Maropoulos, S., Karagiannis, S., Ridley, N., (2007). Factors affecting prior austenite grain size in low alloy steel, Journal of materials science, 42(4), 1309-1320.
• Toms, T., (2013). The Application of Laser Cladding to Mechanical Component Repair, Renovation and Regeneration in Katalinic, B., Tekic, Z., eds, DAAAM International Scientific Book, DAAAM International, 587-608, Vienna, Austria.
• Wang, X.H., Han, F., Liu, X.M., Qu, S.Y., Zou, Z.D., (2008). Effect of molybdenum on the microstructure and wear resistance of Fe-based hardfacing coatings, Materials Science and Engineering: A, 489(1-2), 193-200.
• Zanzarin, S., Bengtsson, S., Molinari, A., (2016). Study of dilution in laser cladding of a carbon steel substrate with Co alloy powders, Powder Metallurgy, 59(1), 85-94.
• Zhang, M., Liu, S.S., Luo, S.X., Qu, K.L., (2018). Effect of molybdenum on the high-temperature properties of TiC-TiB2 reinforced Fe-based composite laser cladding coatings, Journal of Alloys and Compounds, 742, 383-390.