Effect of the Oscillator Length on the Characteristics of a Feedback Type Fluidic Oscillator
This work characterizes the various length fluidic oscillators with constant depth and having the same main geometric dimensions. A change in fluidic oscillator's length affects the frequency and sweeping characteristics of the fluidic oscillators. These characteristics were extracted by means of constant temperature anemometry hot-wire measurements and water flow visualizations. A total number of ten fluidic oscillators were compared to the baseline fluidic oscillator design. It was observed that shortening the fluidic oscillator ceases the oscillations after a threshold oscillator length whereas elongating the fluidic oscillator decreases the frequency and sweep angle gradually. Furthermore, the frequency maps obtained from hot-wire measurements for each considered fluidic oscillator design provided overall detail about the frequency of the oscillations for a wide range of flow rate. For a constant supply flow rate where the frequency and the sweep angle of an oscillator is constant, changing the length of a fluidic oscillator will allow varying these characteristics of the oscillator. Thus the oscillator can be tailored for a specific need of an application.
___
- [1]. C. C. Allgood ve C. C. Lawson, "Performance of R438A in R-22 refrigeration and air conditioning systems,", International Refrigeration and Air Conditioning Conference at Purdue, Indiana, 2010.
- [2]. M. Baraz, "Alternatif soğutkan kullanılan doğrudan genleşmeli soğutma sistemlerinde evaporatör ve kondenser kapasitesine etki eden parametrelerin incelenmesi,", Doktora Tezi, 2011.
- [3]. Bock Compressor, "Alternative RefrigerantsInformation on use of R22," 7 Nisan 2020. URL:http://www.bock.de/media/files/PDF/Produktinformat ionen/96151_Alternative-refrigerants_R22_Gb.pdf.
- [4]. A. Ergün, A. E. Gürel ve İ. Ceylan, "Ticari tip soğutma sistemlerinde R22 akışkanının alternatifi olarak R438A ve R417A akışkanlarının performansının incelenmesi,", Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, cilt 6, no. 4, pp. 824-833, 2018.
- [5]. A. La Rocca, V. La Rocca, A. Messineo ve D. Panno, "Use of HFC fluids as suitable replacements in lowtemperature refrigeration plants,", Journal of Engineering and Applied Sciences, cilt 9, no. 1, pp. 74-79, 2014.
- [6]. Z. Cingiz, F. Katırcıoğlu, Y. Çay ve A. Kolip, "Buhar Sıkıştırmalı Soğutma Sisteminde R22 Alternatifi Soğutucu Akışkanların Termodinamik Analizi," Politeknik Dergisi, 2020. DOI: 10.2339/politeknik.548115
- [7]. M. Çalışan ve İ. Türkoğlu, "Termal Kameralar ve Uygulamaları,", Elektrik-elektronik ve Bilgisayar Sempozyumu, FEEB 2011, Elazığ, 2011.
- [8]. M. Weinmann, J. Leitloff, L. Hoegner, B. Jutzi, U. Stilla ve S. Hinz, "Thermal 3D mapping for object detection in dynamic scenes,", ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, cilt 2, no. 1, p. 53, 2014.
- [9]. F. Katırcıoğlu, Y. Çay ve Z. Cingiz, "Infrared image enhancement model based on gravitational force and lateral,", Infrared Physics and Technology, cilt 100, pp. 15- 27, 2019.
- [10]. Climalife IDS Refrigeration Limited, "HFC Refrigerants," URL: https://www.climalife.co.uk/refrigerants-hfc-refrigerants. [Erişildi: 12 Nisan 2020].
- [11]. Jiang, H., Zeng, L., ve Bi, B., "A comprehensive method of contour extraction for industrial computed tomography images,", Optics and Lasers in Engineering, 51(3), 286-293, 2013.
- [12]. Duan, L., Yao, M., Wang, J., Bai, T., ve Zhang, L.," Segmented infrared image analysis for rotating machinery fault diagnosis,", Infrared Physics & Technology, 77, 267- 276,2016.
- [13]. Barbieri, A. L., De Arruda, G. F., Rodrigues, F. A., Bruno, O. M., ve da Fontoura Costa, L., "An entropy-based approach to automatic image segmentation of satellite images,", Physica A: Statistical Mechanics and its Applications, 390(3), 512-518, 2011.
- [14]. Simone, G., Pedersen, M., ve Hardeberg, J. Y., "Measuring perceptual contrast in digital images,", Journal of Visual Communication and Image Representation, 23(3), 491-506, 2012.
- [15]. T. Haigh, "Cleve Moler: Mathematical software pioneer and creator of Matlab,", IEEE Annals of the History of Computing, 30(1), 87-91, 2008.
- [16]. The MathWorks, Inc., "Creating graphical user interfaces,", The MathWorks, Nantick, MA, 2002.
- [17]. F. Katırcıoğlu, "Real-time infrared image processing for control and monitoring of greenhouse system,", Journal of Applied Remote Sensing, cilt 14, no. 2, p. 026503, 2020.