DETERMINATION OF MIXING AND COMPACTION TEMPERATURES REGARDING TO BITUMENS INVOLVING PROCESS OIL
DETERMINATION OF MIXING AND COMPACTION TEMPERATURES REGARDING TO BITUMENS INVOLVING PROCESS OIL
In recent years, researchers and engineers investigate the effective and environmentally friendly additives for bitumen modification, thereby improving the performance characteristics of bitumen. Many additives are usually used in bituminous mixtures to reduce energy requirement by decreasing mixing and compaction temperatures of bitumen. Most bitumen shows non-Newtonian behavior at application temperatures ranges. Workability of bitumen samples depends on the proper selection of mixing and compacting temperatures. This paper is aimed to presents a laboratory evaluation of bitumen samples containing different contents of process oil. In the light of the study, base bitumen samples have been prepared with three different percentages (1%, 2% and 3%) of process oil. The prepared bitumen samples containing process oil have been subjected to Brookfield viscosity test. Mixing and compaction temperatures of bitumen samples have been determined by Brookfield viscosity test.
Keywords:
Modification, environmentally friendly additive, mixing and compaction temperatures, process oil Brookfield viscosity test,
___
- 1. Bukka K, Miller JD and Obladt AG. Fractionation and characterization of Utah tars and bitumens: Influence of chemical composition on bitumen. Energy & Fuels, 1991;5:333-340.
- 2. Rahman MT, Hainin MR and Bakar WA. Use of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen. Construction and Building Materials, 2017;150:95-104.
- 3. Aflaki S and Tabatabaee N. Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran. Construction and Building Materials, 2009;23:2141-2150.
- 4. Almeida-Costa A and Benta A. Economic and environmental impact study of warm mix asphalt compared to hot mix asphalt. Journal of Cleaner Production, 2015;112:2308-2317.
- 5. Rusbintardjo G, Hainin MR and Yusoff NI. Fundamental and rheological properties of oil palm fruit ash modified bitumen. Construction and Building Materials, 2013;49:702-711.
- 6. Fernandes ARM, Silva HMRD and Oliveira JRM. Developing enhanced modified bitumens with waste engine oil products combined with polymers. Construction and Building Materials, 2018;160:714-724.
- 7. Lei Z, Bahia H, Yi-qiu T and Ling C. Effects of refined waste and bio-based oil modifiers on rheological properties of asphalt binders. Construction and Building Materials, 2017;148:504-511.
- 8. Zeng M, Li J, Zhu W and Xia Y. Laboratory evaluation on residue in castor oil production as rejuvenator for aged paving asphalt binder. Construction and Building Materials, 2018;193:276-285.
- 9. Portugal ACX, Lucena LCF, Lucena AEFL, Costa DB and Lima KA. Rheological properties of asphalt binders prepared with maize oil. Construction and Building Materials, 2017;152:1015-1026.
- 10. Wu S and Muhunthan B. Evaluation of the effects of waste engine oil on the rheological properties of asphalt binders. Journal of Materials in Civil Engineering, 2018;30(3):102-109.
- 11. Qurashi IA and Swamy AK. Viscoelastic properties of recycled asphalt binder containing waste engine oil. Journal of Cleaner Production, 2018;182:992-1000.
- 12. Cao X, Wang H, Cao XU, Sun W, Zhu H and Tang B. Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. Construction and Building Materials, 2018;180:455-463.
- 13. Köfteci S, Ahmedzade P and Kultayev B. Performance evaluation of bitumen modified by various types of waste plastics. Construction and Building Materials, 2014;73:592-602.
- 14. Wang C, Xue L, Xie W, You Z and Yang X. Laboratory investigation on chemical and rheological properties of bio- asphalt binders incorporating waste cooking oil. Construction and Building Materials, 2018;167:348-358.
- 15. Dubois E, Mehta DY and Nolan A. Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder. Construction and Building Materials, 2014;65:184-190.
- Başlangıç: 2018
- Yayıncı: Uşak Üniversitesi
Sayıdaki Diğer Makaleler
A TUTORIAL ON BANG-BANG ALGORITHM FOR ATTITUDE CONTROL SYSTEM
ANALYTICAL ALGORITHM FOR COMPUTING GAIN AND PHASE MARGINS FOR DISCRETE TIME SYSTEM
Rafet Can ÜMÜTLÜ, Berkan HIZARCI, Hasan OZTURK, Zeki KIRAL
DETERMINATION OF MIXING AND COMPACTION TEMPERATURES REGARDING TO BITUMENS INVOLVING PROCESS OIL