Zirkonya İlave Edilmiş Hidroksiapatitlerin Yoğunluk ve İç Yapı İncelemeleri
Zirkonya ilave edilmiş hidroksiapatitler çöktürme yöntemi ile üretilmiş ve 1100ºC ve 1300ºC’lerde 1 saat havada sinterlenmişlerdir. Zirkonya ilave edilmiş hidroksiapatitlerde 3- kalsiyum fosfat gibi ikincil fazlar oluşmuştur. Ayrıca, zirkonya eklenmiş hidroksiapatitlerin kafes parametrelerindeki farklılıkların sebebi, hegzagonal kristal yapısına ilave edilmiş olan bazı Zr4+ iyonlarıdır. Saf hidroksiapatitin teorik yoğunluğuna ulaşması için sinterleme sıcaklığı olarak 1100 ºC yeterli olurken, zirkonya ilave edilmiş hidroksiapatitlerde, yoğun malzeme üretimi için 1100 ºC’den yüksek sinterleme sıcaklıkları gerektiği belirlenmiştir.
Zirkonya İlave Edilmiş Hidroksiapatitlerin Yoğunluk ve İç Yapı İncelemeleri
Zirconia added hydroxyapatites were synthesized by a precipitation method and sintered in air at 1100ºC ve 1300ºC for 1 hour. Secondary phases such as tri-calcium phosphates were formed in zirconia added hydroxyapatites. Moreover, lattice parameters of zirconia added hydroxyapatites were changed because of the presence of Zr4+ ions in the crystal structure. Although density of pure hydroxyapatite can reach to the theoretical density after the sintering at 1100 ºC, zirconia added hydroxyapatites should be sintered above 1100 ºC to obtain high densities.
___
- [1] Ji, H., Marquis, P.M., "Sintering behavior of hydroxyapatite reinforced
with 20 wt % Al2O3” Journal of Materials Science 28, 1941-1945,
(1993).
[2] Matsuno, T., Watanabe, K., Ono, K., Koishi, M., “Preparation of
laminated hydroxyapatite / zirconia sintered composite with the gradient
[3] Basar, B., Evis, Z., “Structural investigation of nano hydroxyapatite doped
with Y3+ and F- ions” Materials Science and Technology, 25, 794-798,
2009
[4] Kijkowska, R., Lin, S., LeGeros, R. Z., “Physico-chemical and thermal
properties of chlor-, fluor-, and hydroxyapatites”. editörler: Brown, S.,
Clarke, I., ve Williams, P., Bioceramics, Trans Tech Publications,
İsviçre, 14, 31-34., 2002.
[5] Kim, H. W., Noh, Y. J., Koh, Y. H., Kim, H. E., Kim, H. M., “Effect of
CaF2 on densification and properties of hydroxyapatite-zirconia
composites for biomedical applications” Biomaterials, 23, 4113-4121,
2002.
[6] Li, J., Liao, H., Hermansson, L. “Sintering of partially-stabilized zirconia
and partially-stabilized zirconia - hydroxyapatite composites by hot
isostatic pressing and pressureless sintering” Biomaterials, 17, 1787-
1790, 1996.
[7] Takagi, M., Mochida, M., Uchida, N., Saito, K., Uematsu, K. “Filter cake
forming and hot isostatic pressing for TZP-dispersed hydroxyapatite
composite” Journal of Materials Science: Materials in Medicine, 3, 199-
203, 1992.
[8] Rao, R.R., Kannan, T.S., “Synthesis and sintering of hydroxyapatite -
zirconia composites” Materials Science and Engineering C, 20, 187-
193, 2002.
[9] Heimann, R.B., Vu, T.A., “Effect of CaO on thermal decomposition
during sintering of composite hydroxyapatite - zirconia mixtures for
monolithic bioceramic implants” Journal of Materials Science Letters,
16, 437-439, 1997.
[10] Ahn, E.S., Gleason, N.J., Nakahira, A., Ying, J.Y. “Nanostructure
processing of hydroxyapatite-based bioceramics” Nano Letters, 1-3,
149-153, 2001.
[11] Wu, J., Yeh, T. “Sintering of hydroxyapatite - zirconia composite
materials” Journal of Materials Science, 23, 3771-3777, 1988.
[12] Ioku, K., Yoshimura, M., Somiya, S., “Microstructure and mechanical
properties of hydroxyapatite ceramics with zirconia dispersion prepared
by post-sintering” Biomaterials, 11, 57-61, 1990.
[13] Chang, E., Chang, W.J., Wang, B.C., Yang, C.Y. “Plasma spraying of
zirconia- reinforced hydroxyapatite composite coatings on titanium.
Journal of Materials Science: Materials in Medicine, 8, 193-200, 1997.
[14] Jarcho, M., Bolen, C.H., Thomas, M.B., Babock, J., Kay, J.F., Doremus,
R.H., “Hydroxylapatite synthesis and characterization in dense
polycrystalline form” Journal of Materials Science, 11, 2027-2035,
1976.
[15] Evis, Z., “Reactions in hydroxylapatite-zirconia composites” Ceramics
International, 33, 987-991, 2007.
[16] Cullity, B.D. “Elements of x-ray diffraction”, 2. baskı, Addison-Wesley,
Reading, MA, Bölüm 14-10, 1978.