___

Ao J., Li T., Liu Y., Ding Y., Wu G., Hua K., Kong L. Optimal design of thread height and width on an immediately loaded cylinder implant: A finite element analysis, Computers in Biology and Medicine 2010; 40: 681-686 doi:10.1016/j.compbiomed.2009.10.007.

Ausiello P., Franciosa P., Martorelli M.,Watts D.C. Effects of thread features in osseo-integrated titanium implants using a statistics-based finite element method. Dental Materials 2012; 28: 919-927. doi: 10.1016/j.dental.2012.04.035 Barbier L., Vander Sloten J., Krzesinski G., Schepers E., Van Der Perre G. Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog. Journal of Oral Rehabilitation.1998;25:847-858.doi: 10.1046/j.13652842.1998.00318.x

Chun H-J., S.-Y. Cheong S-Y., Han J-H., Heo S-J., Chung J-P., Rhyu I-C., Choı Y-C., Baik H-K., Ku Y. ve Kım M-H. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. Journal of Oral Rehabilitation 2002; 29: 565–574. doi: 10.1046/j.1365-2842.2002.00891.x

Daas, M., Dubois, G., Bonnet, A. S., Lipinski, P., Rignon-Bret, C. A complete finite element 224 model of a mandibular implant retained overdenture with two implants: Comparison between rigid and 225 resilient attachment configurations. Medical Engineering & Physics 2008; 30: 218-225. doi: 10.1016/j.medengphy.2007.02.005

Dilek O., Tezulas E., Dincel M. Required minimum primary stability and torque values for immediate loading of mini dentalimplants: an experimentalstudy in nonviable bovine femoral bone. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology 2008; 105: 20-27. doi: 10.1016/j.tripleo.2007.10.003.

Dittmer S., Dittmer M.P., Kohorst P., Jendras M., Borchers L., Stiesch M. Effect of implant–abutment connection design on load bearing capacity and failure mode of implants. Journal of Prosthodontics 2011; 20: 510-516. doi: 10.1111/j.1532-849X.2011.00758.x

Djebbar N., Serier B., Bachir Bouiadjra B., Benbarek S., Drai A. Analysis of the effect of load direction on the stress distribution in dental implant. Materials & Design 2010; 31: 2097-2101. doi: 10.1016/j.matdes.2009.10.042

Ekici B. Numerical Analysis of a dental system in three-dimension. Advances in Engineering Software 2002; 33: 109-113. doi: 10.1016/S0965-9978(01)00056-4

Figueiredo R.B., Barbosa E. R. C., Zhao X., Yang X., Liu X., Cetlin P.R., Langdon T.G. Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing. Materials Science and Engineering: A 2014; 619: 312-318. doi: 10.1016/j.msea.2014.09.099

Geringer A., Diebels S., Nothdurft F.P. Influence of super structure geometry on the mechanical behavior of zirconia implant abutments: a finite element analysis. Biomedizinische Technik. Biomedical engineering 2014; 59(6):501-6. doi: 10.1515/bmt-2013-0088.

ISO 14801: Dentistry – Implants – Dynamic fatigue test for endosseous dental implants, 2007.

Kaman M. O., Celik N., Kilic F. Effects of the dimensions of threads on stress distributions of the dental implants. Turkish Journal of Science and Technology. 2012; 7(2):, 153-166.

Karl M., Kelly R. Influence of loading frequency on implant failure under cyclic fatigue conditions, Dental Materials 2009; 25: 1426-1432. doi: 10.1016/j.dental.2009.06.015

Kayabasi O., Yuzbasioglu E., Erzincanli F. Static, dynamic and fatigue behaviors of dental implant using finite element method. Advances in Engineering Software 2006; 3: 649-658. doi:10.1016/j.advengsoft.2006.02.004

Kitagawa, T., Tanimoto, Y., Odaki, M., Nemoto, K., Aida, M. Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. Journal of Biomedical Materials Research Part B-Applied. Biomaterials 2005; 75, 457–463. doi: 10.1002/jbm.b.30328

Kong L., Gu Z., Hu K., Zhou H., Liu Y., Liu B. Optimization of the implant diameter and length in type B/2 bone for improved biomechanical properties: A three-dimensional finite element analysis, Advances in Engineering Software. 2009; 40: 935-940. doi: 10.1016/j.advengsoft.2008.12.010

Li T., Hub K., Cheng L., Ding Y., Ding Y., Shao J., Kong L. Optimum selection of the dental implant diameter and length in the posterior mandible with poor bone quality – A 3D finite element analysis, Applied Mathematical Modelling. 2011; 35: 446-456. doi: 10.1016/j.apm.2010.07.008

Lin D., Li Q., Li W., Swain M. Bone remodeling ınduced by dental ımplants of functionally graded materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2010; 92: 430-438. doi: 10.1002/jbm.b.31531

Meriç G., Erkmen E., Kurt A., Tunç Y., Eser A., Influence of prosthesis type and material on the stress distribution in bone around implants: A 3-dimensional finite element analysis. Journal of Dental Sciences2011; 5(3):156−165. doi: 10.1016/j.jds.2011.02.005

Moraes SL, Pellizzer EP, Verri FR, Santiago JF Jr, Silva JV. Three-dimensional finite element analysis of stress distribution in retention screws of different crown-implant ratios. Computer Methods in Biomechanics and Biomedical Engineering. 2015; 18: 689-696. doi: 10.1080/10255842.2013.820719

Park S., Won S.Y., Bae T.S., Song K.Y., Park C.W., Eom T.G. ve Jeong C.M. Fatigue characteristics of five types of implant-abutment joint designs. Metals and Materials International 2008; 14: 133-138. doi: 10.3365/met.mat.2008.04.133

Prados-Privado M., Prados-Frutos J.C., Manchón Á., Rojo R., Felice P., Bea J.A.Dental implants fatigue as a possible failure of implantologic treatment: the importance of randomness in fatigue behaviour. BioMed Research International 2015; 825402. doi: 10.1155/2015/825402

Schiefer H., Bram M., Buchkremer H.P., Stover D. Mechanical examinations on dental implants with porous titanium coating. Journal of Materials Science: Materials in Medicine 2009; 20: 1763–1770. doi: 10.1007/s10856-009-3733-1

Sevilla P., Sandino C., Arciniegas M., Martinez-Gomis J., Peraire M., Gil F.J.. Evaluting mechanical properties and degradation of YTZP dental implants, Materials Science and Engineering C: Materials for Biological Applications. 2010; 30: 14-19. doi: 10.1016/j.msec.2009.08.002

Silva N.R.F.A., Coelho P.G., Fernandes C.A.O., Navarro J.M., Dias R.A., Thompson V.P.. Reliability of one-piece ceramic implant. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2008; 419-426. doi: 10.1002/jbm.b.31113

Şahin S., Çehreli M. C., Yalçın E., The influence of functional forces on the biomechanics of implant-supported prostheses-A review. Journal of Dentistry 2002; 20: 271−282. doi: 10.1016/S0300-5712(02)00065-9

Topkaya H. Dental implant uygulamalarında yorulma davranışının sayısal olarak incelenmesi”, Fırat Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 2014.

Yang J., Xiang H.J. A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone. Journal of Biomechanics. 2007; 40: 2377–2385. doi: 10.1016/j.jbiomech.2006.11.019.