Ilıcadere (Bayındır, İzmir) Pb-Zn cevherleşmesinin jeolojisi ve jeoistatistiksel değerlendirilmesi

Bu çalışma, Ilıcadere (Bayındır - İzmir) Pb - Zn cevherleşmesinin rezerv - tenor değerlendirmesini kapsamaktadır. İnceleme alanında, MTA Genel Müdürlüğü tarafından değişik yıllarda hepsi dik olarak toplam 74 adet sondaj yapılmıştır. Cevher kesen sondaj verileri dijital ortama aktarılmış ve her bir değişken için (Pb, Zn, Cu) jeoistatistiksel parametreler belirlenmiştir. Veriler, kompozit edilerek Jeoistatistiksel uygulamalara geçilmiş ve çeşitli bilgisayar yazılımları kullanılarak cevherleşmenin üç boyutlu değerlendirilmesi yapılmıştır. Cevherleşmenin yatay/düşey yönde variogramları hesaplanmış ve yatağın anizotropisi incelenmiştir. Cevherleşme, Pb için; $C_{0}$ = 20, C = 200, a = 75 m., Zn için ; $C_{0}$ = 4, C = 14, a = 75 m. ve Cu için ; $C_{0}$ = 0.002, C = 0.005, a = 75 m. parametreleriyle küresel olarak modellenmiştir. Model parametrelerinin cevherleşmeye uygunluğu çapraz doğrulama teknikleri ile test edilerek, 10x 10x 10 m. blokların ortalama tenörleri Jeoistatistiksel blok kriging yöntemi ile kestirilmiştir. Cu için veri değerlerinin oldukça küçük ve güvenilir olmamasından dolayı, Cu sadece modellenmiş ve rezerv hesabı yapılmamıştır. Kestirim sonucunda Pb ve Zn için tenör-tonaj dağılımları hesaplanmıştır. Elde edilen tenör-tonaj dağılımları yardımıyla farklı eşik tenörlere karşılık gelen rezerv miktarları ve ortalama tenor değerleri belirlenmiştir. Bu değerlendirmelere göre, Ilıcadere (Bayındır, İzmir) Pb-Zn cevherleşmesinde ekonomik işletilebilirlik çalışmalarının yapılması önerilmektedir.

Geology and geostatistical evaluation of Ilıcadere (Bayındır, İzmir) Pb-Zn mineralization

This study includes grade - tonnage estimation of Ilıcadere (Bayındır, Izmir) Pb-Zn mineralization. In the study area, by General Directorate of MTA, 74 vertical drillholes were made in different years. The data which were coming from drillholes transferred into computer system and statistical parameters were determined for each variable (Pb, Zn and Cu). By com-positing data, three dimensional assessment of the mineralization were done using some special geostatistical softwares. The variograms of mineralization were computed for the vertical and horizontal directions, anisotropy of deposit was investigated and the mineralization was spherically modelled by the parameters for Pb; $C_{0}$=20, C=200, a=75 m., for Zn; $C_{0}$=4, C=14, a=75 m., for Cu; $C_{0}$=0.002, C=0.005, a=75 m. The validity of model parameters to mineralization was tested using the back-kriging technique and the parameters were used for estimation of the average grade of the 10x10x10 m. blocks by geostatistical block kriging technique. Cu was only modelled and no further study was applied to Cu values because of the lack of data and unreliable Cu values. Grade-tonnage distributions were calculated for Pb and Zn resulting of estimation. Using the distributions, the reserve amount and average tonnage were determined for different cut-off values. According to the assessments, the results are suggesting to use for feasibility calculations of Ilıcadere (Bayındır, Izmir) Pb-Zn mineralization.

___

  • Bozkurt, E. and Park, R.G., 1994, Southern Menderes Massif-an incipient metamorphic core complex in western Anatolia, Turkey: Journal of Geological Society, London, 151:213-216. Bozkurt, E. and Park, R.G., 1997, Microstructures of deformed grains in the augen gneisses of southern Menderes Massif (Western Turkey) and their tectonic significance: Geol. Rundsch, 86:(1), 103-119. David, M., 1977, Geostatistical ore reserve estimation: Elsevier, New York, 364 p. Deutsch, C.V. and Journel, A.G., 1996, * Geostatistical software library and user's guide: * Oxford University Press, New York, 340 p. Deutsch, C.V. and Journel, A.G., 1998, GSLIB Geostatistical software library and user's guide: 2nd Edition, Applied Geostatistics Series, Oxford University Press, New York, 369 p. Dowd, P.A., 1986, Geometrical and geological controls in geostatistical estimation and orebody modeling, 19th Apcom, 81-94. Erdoğan, B. ve Güngör, T., 1992, Menderes Masifi' nin kuzey kanadının stratigrafisi ve tektonik evrimi: Türkiye Petrol Jeologları Derneği Bülteni, Cilt 4, Sayı 1, Ankara, 9 - 34. Isaaks, E.H. and Srivastava, R.M., 1989, An introduction to applied geostatistics: Oxford University Press, New York, 561 p. Journel, A.G. and Huijbregts, C.J., 1978, Mining geostatistics: Academic Press, London, 600 p. Koçer, S., 2000, Ilıcadere (Bayındır, İzmir) Pb-Zn cevherleşmesinin rezerv-tenör değerlendirilmesi, Hacettepe Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek Mühendislik Tezi, Ankara, 90s. Matheron, G., 1963, Principles of geostatistics: Economic Geology, V: 58, 1246-1266. Özcan, H., 1974, İzmir - Bayındır Ilıcadere Pb - Zn madeni raporu: MTA Rapor no: 289, Ankara, 91 s. Saraç,C, 1998, Geology and ore reserve estimation at Sivrihisar mine (Eskişehir, Turkey): Transactions of the Institution of Mining and Metallurgy, Section A-Mining Industury, England, Vol: 107, A6-A12. Saraç, C. And Tercan, A.E., 1996, Grade and reserve estimation of Tulovasi borate deposit by block kriging: International Geology Review, No: 9, 832-837. Soares, A., 1990, Geostatistical estimation of orebody geometry, morphological kriging: International Association for Mathematical Geology, Vol: 22, 787-802. Tercan, A.E., 1996, Maden yatakları sınır belirsizliğinin indikatör kriging ile değerlendirilmesi ve Sivas-Kangal-Kalburçayırı kömür yatağında bir uygulama: Madencilik Dergisi, TMMOB Maden Mühendisleri Odası, Ankara, No: 35-4, 3-11. Tercan, A.E. ve Saraç, C, 1998, Maden yataklarının değerlendirilmesinde jeoistatistiksel yöntemler: TMMOB Jeoloji Mühendisleri Odası Yayınları, No 48, Ankara, 137 s. Wellmer, F.W., 1998, Statistical evaluations in exploration for mineral deposit: Springer- Verlag, New York (Translated by D. Large), 379 p.