A 2.4-GHz highly linear derivative superposition Gilbert cell mixer

A 2.4-GHz highly linear derivative superposition Gilbert cell mixer

This paper presents a new derivative superposition Gilbert cell to minimize the third-order nonlinear current term of transconductance transistors. To decrease the parasitic capacitance effect on gain, noise figure, and linearity of the circuit, extra inductors and capacitors are added between the switching and transconductance stages. The proposed mixer is simulated in 0.18-µm RF-CMOS technology with a 1.8-V supply. The results show an improvement of about 23 dBm in IIP3 compared to conventional mixers. The power consumption of this circuit is about 3.96 mW.

___

  • [1] Kwon I, Lee K. An integrated low power highly linear 2.4 GHz CMOS receiver front-end based on current amplification and mixing. IEEE Micro Wir Com Lett 2005; 15: 36–38.
  • [2] Haartsen JC. The Bluetooth radio system. IEEE P Communications 2000; 7: 28–36.
  • [3] Ariyavisitakul C, Liu TP. Characterizing the effects of nonlinear amplifiers on linear modulation for digital portable radio communications. IEEE T Vehicular Tech 1990; 39: 383–389.
  • [4] Elyasi H, Nabavi A. Highly linear post distortion cancellation common gate Gilbert mixer in Ku band. IEICE Elec Exp 2011; 13: 1014–1021.
  • [5] Parvizi M, Nabavi A. Low-power highly linear UWB CMOS mixer with simultaneous second- and third-order distortion cancellation. Microelectr J 2010; 41: 1–8.
  • [6] Zhang H, S´anchez-Sinencio E. Linearization techniques for CMOS low noise amplifiers: a tutorial. IEEE Circ Sys 2011; 58: 22–36.
  • [7] Liang KH, Lin CH, Chang Y, Chan YJ. A new linearization technique for CMOS RF mixer using third-order transconductance cancellation. IEEE Microw Wireless Compon Lett 2008; 18: 350–352.
  • [8] Hu S, Li W, Huang Y, Hong Z. Design of a high linearity low noise mixer for low voltage application. In: IEEE Solid-State and Integrated Circuit Technology Conference; 1–4 November 2010; Shanghai, China. New York, NY, USA: IEEE. pp. 653–655.
  • [9] Kim TW, Kim B, Lee K. Highly linear receiver front-end adopting MOSFET transconductance linearization by multiple gated transistors. IEEE J Solid-State Circuits 2004; 39: 223–229.
  • [10] Tanaka S, Behbahani F, Abidi AA. A linearization technique for CMOS RF power amplifiers. In: IEEE VLSI Circuits Digital Conference; 12–14 June 1997; Tokyo, Japan. New York, NY, USA: IEEE. pp. 93–94.
  • [11] Mujeeb A, Yuwono S, Lee JS, Lee SG. Highly linear CMOS low noise amplifier with IIP3 boosting technique. In: IEEE SoC Design Conference; 24–25 November 2008; Busan, Korea. New York, NY, USA: IEEE. pp. 414–416.
  • [12] Mohieldin A, S´anchez-Sinencio E, Mart´ınez J. A low-voltage fully balanced OTA with common mode feedforward and inherent common mode feedback detector. In: Solid-State Circuits Conference; 24–26 September 2002; Florence, Italy. New York, NY, USA: IEEE. pp. 191–194.
  • [13] Terrovitis MT, Meyer RG. Intermodulation distortion in current-commutating CMOS mixers. IEEE J Solid-State Circuits 2000; 35: 1461–1473.
  • [14] Liu Y, Lu W, Cheng S, Cao S, Zhou X. A 0.18µm 3.3mW double-balanced CMOS active mixer. In: IEEE 7th International Conference on ASIC; 22–25 October 2007; Guilin, China. New York, NY, USA: IEEE. pp. 419–422.
  • [15] Yang JT, Mu YM, Wu MJ. A 2.4GHz low power highly linear mixer for direct-conversion receivers. International Journal of Circuits, System and Signal Processing 2007; 1: 203–206.
  • [16] Wan Q, Wang Ch. A 0.18-mm CMOS high-performance up-conversion mixer for 2.4-GHz transmitter application. Frequenz 2010; 64: 14–18.