Reconfigurable antenna structure for RFID system applications using varactor-loading technique

A novel method is presented for electrically tuning the frequency of a compact radio-frequency identification (RFID) tag antenna. A tuning circuit, comprising a radio frequency (RF) switch and discrete passive components, was completely integrated into the antenna element, which is thus free of DC wires. The low-profile printed antennas were fabricated together with the layouts of the DC control circuits and other RF/baseband circuit footprints. A surface-mounted varactor was applied as a frequency-tuning element at the proper places of the meandered slots in the compact antenna. Prototype designs showed that the in-band frequency (return loss < 10 dB) was tunable from 2.4 GHz to 2.8 GHz when the bias voltage varied from 4 V to 7 V. The impact of the tuning circuit on the antenna's return loss and radiation pattern were experimentally studied through comparison with the performance of a reference antenna not incorporating the tuning circuit. The proposed frequency tuning concept can be extended to more complex compact structures as well as other types of antennas to give enhanced electrical performance.

Reconfigurable antenna structure for RFID system applications using varactor-loading technique

A novel method is presented for electrically tuning the frequency of a compact radio-frequency identification (RFID) tag antenna. A tuning circuit, comprising a radio frequency (RF) switch and discrete passive components, was completely integrated into the antenna element, which is thus free of DC wires. The low-profile printed antennas were fabricated together with the layouts of the DC control circuits and other RF/baseband circuit footprints. A surface-mounted varactor was applied as a frequency-tuning element at the proper places of the meandered slots in the compact antenna. Prototype designs showed that the in-band frequency (return loss < 10 dB) was tunable from 2.4 GHz to 2.8 GHz when the bias voltage varied from 4 V to 7 V. The impact of the tuning circuit on the antenna's return loss and radiation pattern were experimentally studied through comparison with the performance of a reference antenna not incorporating the tuning circuit. The proposed frequency tuning concept can be extended to more complex compact structures as well as other types of antennas to give enhanced electrical performance.

___

  • K. Finkenzeller, RFID Handbook, 2nd ed., Chichester, Wiley, 2003.
  • K.V.S. Rao, P.V. Nikitin, S.F. Lam, “Antenna design for UHF RFID tags: A review and a practical application”, IEEE Transactions on Antennas and Propagation, Vol. 53, pp. 3870-3876, 2005.
  • A. Ibrahiem, T.P. Vuong, A. Ghiotto, S. Tedjini, “New design antenna for RFID UHF tags”, Proceedings of IEEE Antennas Propagation Society International Symposium, Albuquerque, pp. 1355-1358, 2006.
  • S. Jeon, Y. Yu, J. Choi, “Dual-band slot-coupled dipole antenna for 900 MHz and 2.45 GHz RFID tag application”, Electronics Letters, Vol. 42, pp. 1259-1260, 2006.
  • Z. Fan, S. Qiao, J.T. Huangfu, L.X. Ran, “Signal descriptions and formulations for long range UHF RFID readers,” Progress In Electromagnetics Research, Vol. 71, pp. 109-127, 2007.
  • R. Garg, P. Bhartia, I. Bahl, A. Ittipiboon, Microstrip Antenna Design Handbook, Norwood, Massachusetts, Artech House, 2001.
  • I.J. Bahl, P. Bhartia, Microstrip Antennas, Norwood, MA, Artech House, 1980.
  • M. Komulainen, M. Berg, H. Jantunen, E.T. Salonen, C. Free, “A frequency tuning method for a planar inverted-F antenna,” IEEE Transactions on Antennas and Propagation, Vol. 56, pp. 944-950, 2008.
  • R. Boylestad, L. Nashelsky, Electronics Devices and Circuit Theory, 4th ed., New Delhi, Prentice Hall of India, 1989.
  • Marktrace Technology, “RFID tags”, 2010. Available at http://www.marktrace.com/en/product-default-5.html.
  • Z. Fan, S. Qiao, J. Huangfu, L. Ran, “A miniaturized 2.45 GHz RFID tag antenna using planar impedance
  • transformer,” PIERS Online, Vol. 3, pp. 951-954, 2007.