Power efficient linear transmitters using sigma-delta modulation with switching amplifiers

In conventional envelope elimination and restoration transmitters, the envelope information of the carrier is reconstructed by modulating the supply voltage of the switching amplifier. In this paper, it is shown that the supply voltage modulation introduces nonlinearity and reduces the average power efficiency of the transmitter. Here, novel transmitter architectures using sigma-delta--modulated carrier signals are proposed to overcome these shortcomings. The proposed architecture's and conventional envelope elimination and restoration transmitter's linearity and efficiency performances are compared at various oversampling rates and signal bandwidths. It is demonstrated that the proposed architectures may provide better linearity and efficiency than conventional envelope elimination and restoration transmitters.

Power efficient linear transmitters using sigma-delta modulation with switching amplifiers

In conventional envelope elimination and restoration transmitters, the envelope information of the carrier is reconstructed by modulating the supply voltage of the switching amplifier. In this paper, it is shown that the supply voltage modulation introduces nonlinearity and reduces the average power efficiency of the transmitter. Here, novel transmitter architectures using sigma-delta--modulated carrier signals are proposed to overcome these shortcomings. The proposed architecture's and conventional envelope elimination and restoration transmitter's linearity and efficiency performances are compared at various oversampling rates and signal bandwidths. It is demonstrated that the proposed architectures may provide better linearity and efficiency than conventional envelope elimination and restoration transmitters.

___

  • L.R. Kahn, “Single-sideband transmission by envelope elimination and restoration”, Proceedings of the IRE, Vol. 40, pp. 803–806, 1952.
  • F.H. Raab, E.B. Sigmon, G.R. Myers, M.R. Jackson, “L-band transmitter using Kahn EER technique”, IEEE Transactions on Microwave Theory and Techniques, Vol. 46, pp. 2220–2225, 1998.
  • D. Su, W. McFarland, “IC for linearizing RF power amplifiers using envelope elimination and restoration”, HP Laboratories Technical Report, No: HPL-98-186, pp. 1–21, 19 Available at http://www.hpl.hp.com/techreports/98/HPL-98-186.pdf, accessed on 27/03/2012.
  • T. Nesimoglu, S.C.J. Parker, K.A. Morris, J.P. Mcgeehan, “The performance and efficiency of envelope elimination and restoration transmitters for future multiple-input multiple-output wireless local area networks”, IET Communications, Vol. 2, pp. 473–483, 2008.
  • T. Nesimoglu, K.A. Morris, S.C.J. Parker, J.P. McGeehan, “Improved EER transmitters for WLAN”, IEEE Radio and Wireless Symposium, pp. 239–242, 2006.
  • T. Nesimoglu, “Linearity and efficiency performance of a modified envelope elimination and restoration transmitter architecture”, URSI General Assembly and Scientific Symposium of International Union of Radio Science, 2011. Agilent Technologies. Agilent EEsof Advanced Design System Simulation Tool Web Site. Available at http://www.home.agilent.com/agilent/product.jspx?nid = -34360.0.00&lc = eng&cc = TR, accessed on 27/03/2012. T. Nesimoglu, K.A. Morris, “Signal processor for use with a power amplifier in a wireless circuit”, World Intellectual Property Organisation (WIPO) patent publication, WO2007064007 A1, 2007.
  • T. Nesimoglu, K.A. Morris, “An EER RF amplifier with PWM signal switching”, UK patent publication, GB2432982 A, 200
  • T. Nesimoglu, K.A. Morris, “Signal processor for use with a power amplifier in a wireless circuit”, US patent publication, US 7518441 B2, 2009.
  • T. Nesimoglu, K.A. Morris, “Signal processor for use with a power amplifier in a wireless circuit”, China Patent and Trademark Office patent publication, CN101044689, 2007.
  • T. Nesimoglu, K.A. Morris, “An EER RF amplifier with PWM signal switching”, Japan Patent Office patent publication, JP 2009517912 A, 2009.
  • P. Wang, J.A. Hegt, A.H.M. van Roermund, “Pulse modulation techniques for UMTS handset transmitters”, Prorisc CDrom, pp. 538–542, 2002 [online], available at http://citeseerx.ist.psu.edu/viewdoc/summary?doi = 10.1.1.3.3358, accessed on 27/03/2012.
  • F.H. Raab, “Drive modulation in Kahn-technique transmitters”, IEEE MTT-S International Microwave Symposium Digest, Vol. 2, pp. 811–814, 1999.
  • F.H. Raab, “Intermodulation distortion in Kahn-technique transmitters”, IEEE Transactions on Microwave Theory and Techniques, Vol. 44, pp. 2273–2278, 1996.
  • MicroWave Technology, MWT-PH-773 transistor data sheet, available at http://www.mwtinc.com/cat/fets/pdf/MwT-PH7.pdf, accessed on 27/03/2012.
  • N.O. Sokal, “Class-E switching-mode high-efficiency tuned RF/microwave power amplifier: improved design equations”, International Microwave Symposium Digest, Vol. 2, pp. 779–782, 2000.
  • N.O. Sokal, “Class E high-efficiency power amplifiers, from HF to microwave”, International Microwave Symposium Digest, Vol. 2, pp. 1109–1112, 1998.
  • T. Nesimoglu, “A linear transmitter architecture using class-E switching power amplifiers”, Mosharaka International Conference on Wireless Communications and Mobile Computing, 2011.
  • Hittite Microwave Corporation, http://www.hittite.com, accessed on 27/03/2012.
  • MA-COM Technology Solutions, http://www.macom.com, accessed on 27/03/2012.
Turkish Journal of Electrical Engineering and Computer Science-Cover
  • ISSN: 1300-0632
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK