Performance Analysis of a Fuzzy Logic Based Rotor Resistance Estimator of an Indirect Vector Controlled Induction Motor Drive

This paper presents a simple method for estimating rotor resistance in an indirect vector-controlled induction motor drive. This is important in vector control, if high-performance torque control is needed. For this purpose, a rotor resistance estimator using fuzzy logic technique is used and analysis, design, and digital simulations are carried out to demonstrate the effectiveness of the proposed estimator.

Performance Analysis of a Fuzzy Logic Based Rotor Resistance Estimator of an Indirect Vector Controlled Induction Motor Drive

This paper presents a simple method for estimating rotor resistance in an indirect vector-controlled induction motor drive. This is important in vector control, if high-performance torque control is needed. For this purpose, a rotor resistance estimator using fuzzy logic technique is used and analysis, design, and digital simulations are carried out to demonstrate the effectiveness of the proposed estimator.

___

  • B.K. Bose, Power Electronics and AC Drives, Prentice-Hall, Englewood Cliffs, NJ: 1986.
  • L. J. Garces, ”Parameter Adaptation for the Speed-Controlled Static AC Drive with a Squirrel-Cage Induction Motor” IEEE Trans. Ind. Applicat., vol. 1A-16, N ◦ , Marsh/April 1980,pp.173-177.
  • F. Loser, and P. Sattler, “Identification and Compensation of the Rotor Temperature of Ac Drives by an Observer”, IEEE IAS ’84, pp. 532-537. R. D. Lorenz, “Tuning of Field Oriented Induction motor controllers for High-Performance ”,IEEE Trans. Ind. Applic.,vol.IA-22, pp.293-297, Mar./Apr. 1986.
  • Donker, D.E.R. et al, “Thermal Models of Inverter-fed Asynchronous Machines suited for Adaptative Tem- perature Compensation of Field Oriented Controllers, Proc of IEEE-IAS Annual Meeting, Denver, 1986, pp. 139.
  • C. Wang, D.W. Novotny, T.A. Lipo, “An Automated Rotor time Constant Measurement System for Indirect Field-Oriented Drives”, IEEE Trans. On IA, Jan./Feb.1988, vol. 24, pp.151-159.
  • N.R. Klaes, “On-line Tuning of the Rotor Resistance in an Inverter Fed Induction Machines with Direct- Self- Control”, ETEP Jan’94, vol.4. H.A.Toliyat, M.S. Arefeen, K.M. Rahman, M. Ehsani,” Rotor Time Constant Updating Scheme for a Rotor Flux Oriented Induction Motor Drive”, IEEE, PESC’95, 1995, pp. 1302-1306.
  • P. coirault, J.C. Trigeassou, J.P.Gaubert, and G. Campenois, “Parameter Estimation of an Induction Machine using reinitialized Partial Moments”, 4thIEEE Conf. on Control Appl., 1995, pp. 979-984.
  • Edson Bim, “Fuzzy Optimization for Rotor Constant Identification of an Indirect FOC Induction Motor Drive”, IEEE Trans On Ind Elec, Dec 2001, Vol. 48, pp. 1293-1295.
  • Y. Miloud, A. Draou, “Fuzzy Logic Based Rotor Resistance Estimator of an Indirect Vector controlled Induction Motor Drive” Conf. Rec. IEEE/ IECON’02 Sevilla, Spain, pp. 961-967, 5-8 November 2002.
  • B.K. Bose, “Modern Power Electronics and AC drives”, Prentice-Hall, Inc. 2002, pp.573-574.
  • A.Derdiyok, “Simple Metod for Speed and Rotor resistance Estimation of Induction Machines”, IEEE Proc- Electr, Power Appl, Vol 150, No.3, May 2003, pp 289-294.
  • Baburaj Karanayil, Muhammed Fazlur Rahman, nad Collin Grantham,” An Implementation of a Programmable Cascaded Low-Pass Filter for a Rotor Flux Synthesizer for an Induction Motor Drive” IEEE Transactions on Power Electronics, Vol 19, No2, March 2004, pp 257-263.