Optimal sizing and siting distributed generation resources using a multiobjective algorithm

The restructuring of the electrical market, improvement in the technologies of energy production, and energy crisis have paved the way for increasing applications of distributed generation (DG) resources in recent years. Installing DG units in a distribution network may result in positive impacts, such as voltage profile improvement and loss reduction, and negative impacts, such as an increase in the short-circuit level. These impacts depend on the type, capacity, and place of these resources. Therefore, finding the optimal place and capacity of DG resources is of crucial importance. Accordingly, this paper is aimed at finding the optimal place and capacity of DG resources, in order to improve the technical parameters of the network, including the power losses, voltage profile, and short-circuit level. The proposed formulation of this paper significantly increases the convergence and the speed of the finding the answers. Furthermore, to select the optimal weighting coefficients, an algorithm is proposed. The weighting coefficients are decided on according to the requirements of each network and deciding on them optimally prevents the arbitrarily selection of these resources. The genetic algorithm is used to minimize the objective function and to find the best answers during the investigation. Finally, the proposed algorithm is tested on the Zanjan Province distribution network in Iran and the simulation results are presented and discussed.

Optimal sizing and siting distributed generation resources using a multiobjective algorithm

The restructuring of the electrical market, improvement in the technologies of energy production, and energy crisis have paved the way for increasing applications of distributed generation (DG) resources in recent years. Installing DG units in a distribution network may result in positive impacts, such as voltage profile improvement and loss reduction, and negative impacts, such as an increase in the short-circuit level. These impacts depend on the type, capacity, and place of these resources. Therefore, finding the optimal place and capacity of DG resources is of crucial importance. Accordingly, this paper is aimed at finding the optimal place and capacity of DG resources, in order to improve the technical parameters of the network, including the power losses, voltage profile, and short-circuit level. The proposed formulation of this paper significantly increases the convergence and the speed of the finding the answers. Furthermore, to select the optimal weighting coefficients, an algorithm is proposed. The weighting coefficients are decided on according to the requirements of each network and deciding on them optimally prevents the arbitrarily selection of these resources. The genetic algorithm is used to minimize the objective function and to find the best answers during the investigation. Finally, the proposed algorithm is tested on the Zanjan Province distribution network in Iran and the simulation results are presented and discussed.

___

  • M.M. Elnashar, R.E. Shatshat, M.M.A. Salama, “Optimum siting and sizing of a large distributed generator in a mesh connected system”, Electric Power Systems Research, Vol. 80, pp. 690–697, 2010.
  • S. Ghosh, S.P. Ghoshal, S. Ghosh, “Optimal sizing and placement of distributed generation in a network system”, International Journal of Electrical Power & Energy Systems, Vol. 32, pp. 849–856, 2010.
  • D.Q. Hung, N. Mithulananthan, R.C. Bansal, “Analytical expressions for DG allocation in primary distribution networks”, IEEE Transactions on Energy Conversion, Vol. 25, pp. 814–820, 2010.
  • J.B.V. Subrahmanyam, C. Radhakrishna, “Distributed generator placement and sizing in unbalanced radial distribution system”, International Journal of Electrical and Electronics Engineering, Vol. 3, pp. 746–753, 2009. T. G¨ ozel, M.H. Hocaoglu, “An analytical method for the sizing and siting of distributed generators in radial systems”, Electric Power Systems Research, Vol. 79, pp. 912–918, 2009.
  • G.N. Koutroumpezis, A.S. Safigianni, “Optimum allocation of the maximum possible distributed generation penetration in a distribution network”, Electric Power Systems Research, Vol. 80, pp. 1421–1427, 2010.
  • H.M. Khodr, M.R. Silva, Z. Vale, C. Ramos, “A probabilistic methodology for distributed generation location in isolated electrical service area”, Electric Power Systems Research, Vol. 80, pp. 390–399, 2010.
  • N. Acharya, P. Mahat, N. Mithulananthan, “An analytical approach for DG allocation in primary distribution network”, International Journal of Electrical Power & Energy Systems, Vol. 28, pp. 669–678, 2006.
  • V.H.M. Quezada, J.R. Abbad, T.G.S. Rom´ an, “Assessment of energy distribution losses for increasing penetration of distributed generation”, IEEE Transactions on Power Systems, Vol. 21, pp. 533–540, 2006.
  • M. Mashhour, M.A. Golkar, S.M.M. Tafreshi, “Optimal sizing and siting of distributed generation in radial distribution network comparison: of unidirectional and bidirectional power flow scenario”, IEEE Bucharest Power Tech Conference, pp. 1–8, 2009.
  • C. Wang, H.H. Nehrir, “Analytical approaches for optimal placement of distributed generation sources in power systems”, IEEE Transactions on Power Systems, Vol. 19, p. 2068–2076, 2004.
  • S. Porkar, P. Poure, A. Abbaspour Tehrani-fard, S. Saadate, “Optimal allocation of distributed generation using a two-stage multi-objective mixed-integer-nonlinear programming”, European Transactions on Electrical Power, Vol. 21, pp. 1072–1087, 2010.
  • M. Ahmadigorji, A. Abbaspour, A.R. Ghahnavieh, M. Fotuhi-Firuzabad, “Optimal DG placement in distribution systems using cost/worth analysis”, World Academy of Science, Engineering and Technology, Vol. 49, pp. 746–753, 200 R.K. Singh, S.K. Goswami, “Optimum allocation of distributed generations based on nodal pricing for profit, loss reduction, and voltage improvement including voltage rise issue”, International Journal of Electrical Power & Energy Systems, Vol. 32, pp. 637–644, 2010.
  • J.H. Teng, Y.H. Liu, C.Y. Chen, C.F. Chen, “Value-based distributed generator placements for service quality improvements”, International Journal of Electrical Power & Energy Systems, Vol. 29, pp. 268–274, 2007.
  • G. Celli, E. Ghiani, S. Mocci, F. Pilo, “A multi-objective evolutionary algorithm for the sizing and siting of distributed generation”, IEEE Transactions on Power Systems, Vol. 20, pp. 750–757, 2005.
  • W. El-Khattam, K. Bhattacharya, Y. Hegazy, M.M.A. Salama, “Optimal investment planning for distributed generation in a competitive electricity market”, IEEE Transactions on Power Systems, Vol. 19, pp. 1674–1684, 200
  • P. Chiradeja, R.G. Ramakumar, “An approach to quantify the technical benefits of distributed generation”, IEEE Transactions on Energy Conversion, Vol. 19, pp. 764–773, 2004.
  • C.L.T. Borges, D.M. Falcao, “Optimal distributed generation allocation for reliability, losses, and voltage improvement”, International Journal of Electrical Power & Energy Systems, Vol. 28, pp. 413–420, 2006.
  • F. Razavi, S.A. Hosseini, M. Karami, A.A. Ghadimi, S.S. Karimi Madahi, “Determining the optimal capacity and place of DGs using GA algorithm: voltage profile improvement and loss reduction”, The 8th Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology Association, Thailand - Conference, pp. 848–851, 2011.
  • L.F. Ochoa, A. Padilha-Feltrin, G.P. Harrison, “Evaluating distributed generation impacts with a multi objective index”, IEEE Transactions on Power Delivery, Vol. 21, pp. 1452–1458, 2006.