Implementation of neural network-based maximum power tracking control for wind turbine generators

In this study, the maximum power point tracking (MPPT) of a permanent magnet synchronous generator used in a wind generator system is realized by a prototype installed in a laboratory environment. The installed prototype is modeled in a MATLAB/Simulink environment. The MPPT is realized by an artificial neural network (ANN). The obtained simulation and experimental results are compared. The maximum power estimation at various windmill speeds (rpm) of the trained ANN in determined reference speeds is analyzed. The zero crossing points of the phases are determined by a digital signal peripheral interface controller and the system is operated according to the triggering angles obtained from the ANN-based control algorithm at the maximum power points.

Implementation of neural network-based maximum power tracking control for wind turbine generators

In this study, the maximum power point tracking (MPPT) of a permanent magnet synchronous generator used in a wind generator system is realized by a prototype installed in a laboratory environment. The installed prototype is modeled in a MATLAB/Simulink environment. The MPPT is realized by an artificial neural network (ANN). The obtained simulation and experimental results are compared. The maximum power estimation at various windmill speeds (rpm) of the trained ANN in determined reference speeds is analyzed. The zero crossing points of the phases are determined by a digital signal peripheral interface controller and the system is operated according to the triggering angles obtained from the ANN-based control algorithm at the maximum power points.

___

  • A.M. De Broe, S. Drouilhet, V. Gevorgian, “A peak power tracker for small wind turbines in battery charging applications”, IEEE Transactions on Energy Conversion, Vol. 14, pp. 1630–1635, 1999.
  • L.I. Hui, K.L. Shi, P.G. McLaren, “Neural-network-based sensorless maximum wind energy capture with compen- sated power coefficient”, IEEE Transactions on Industry Applications, Vol. 41, pp. 1548–1556, 2005.
  • M.N. Eskander, “Neural network controller for a permanent magnet generator applied in a wind energy conversion system”, Renewable Energy, Vol. 26, pp. 463–477, 2002.
  • Y.F. Ren, G.Q. Bao, “Control strategy of maximum wind energy capture of direct-drive wind turbine generator based on neural-network”, Power and Energy Engineering Conference, pp. 1–4, 2010.
  • J.S. Thongam, P. Bouchard, R. Beguenane, I. Fofana, “Neural network based wind speed sensorless MPPT controller for variable speed wind energy conversion systems”, Electric Power and Energy Conference, pp. 1–6, 2010.
  • V. Sheeja, P. Jayaprakash, B. Singh, R. Uma, “Neural network theory based voltage and frequency controller for standalone wind energy conversion system”, Joint International Conference on Power Electronics, Drives and Energy Systems, pp. 1–6, 2010.
  • M. Narayana, G. Putrus, “Optimal control of wind turbine using neural networks”, Universities Power Engineering Conference, pp. 1–5, 2010.
  • M. Matsui, X. Dehong, K. Longyun, Z. Yang, “Limit cycle based simple MPPT control scheme for a small sized wind turbine generator system-principle and experimental verification”, Power Electronics and Motion Control Conference, Vol. 3, pp. 1746–1750, 2004.
  • T. Senjyu, S. Tamaki, N. Urasaki, K. Uezato, T. Funabashi, H. Fujita, “Wind velocity and position sensorless operation for PMSG wind generator”, 5th International Conference on Power Electronics and Drive Systems, Vol. 1, pp. 787–792, 2003.
  • M. Chinchilla, S. Arnaltes, J.C. Burgos, “Control of permanent-magnet generators applied to variable-speed wind- energy systems connected to the grid”, IEEE Transactions on Energy Conversion, Vol. 21, pp. 130–135, 2006.
  • A.J.G. Westlake, J.R. Bumby, E. Spooner, “Damping the power-angle oscillations of a permanent-magnet syn- chronous generator with particular reference to wind turbine applications”, Electric Power Applications, Vol. 143, pp. 269–280, 1996.
  • N. Urasaki, T. Senjyu, K. Uezato, T. Funabashi, H. Fujita, “High efficiency drive for micro-turbine generator based on current phase and revolving speed optimization”, 5th International Conference on Power Electronics and Drive Systems, Vol. 1, pp. 737–742, 2003.
  • M. Kesler, M. Karabacak, E. ¨Ozdemir, “Genel ama¸clı trist¨or s¨ur¨uc¨u e˘gitim setinin tasarımı ve uygulaması”, Otomasyon Dergisi, Vol. 225, pp. 298–304, 2011 (in Turkish).
  • K. Tan, S. Islam, “Optimum control strategies in energy conversion of PMSG wind turbine system without mechanical sensors”, IEEE Transactions on Energy Conversion, Vol. 19, pp. 392–399, 2004.
  • A. Karakaya, E. Karakas, “Performance analysis of PM synchronous motors using fuzzy logic and self-tuning fuzzy PI speed controls”, Arabian Journal for Science and Engineering, Vol. 33, pp. 153–177, 2008.