Effect of fuel choice on conductivity and morphological properties of samarium doped ceria electrolytes for IT-SOFC

Effect of fuel choice on conductivity and morphological properties of samarium doped ceria electrolytes for IT-SOFC

The present investigation is emphasized on the effect of various combustion agents on the crystal properties, surface microstructure, and oxygen ion conductivity of 20% mole-Sm doped ceria $(Ce_{0.80}Sm_{0.20}O_{1.90}/SDC20)$ ceramics as solid electrolyte for ITSOFCs. The most widely used combustion agents for engineering ceramic production as ethylene glycol, diethylene glycol, triethylene glycol, L-alanine, L-valine, glycine, citric acid monohydrate, urea, and EDTA-citric acid were compared in terms of SDC20 properties. X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and electrochemical impedance spectroscopy (EIS) were used to determine the microstructure properties, crystal structure and ionic conductivity of SDC20 powder. XRD pattern of the ceramics revealed the formation of single-phase fluorite structure. According to the results of electrochemical analysis, the maximum total ionic conductivity was observed in SDC20 electrolyte synthesized using triethylene glycol as the fuel among all the synthesized electrolytes $(5.72 x 10^{–2} S.cm^{-1)}.$

___

  • 1. Williams M, Yamaji K, Horita T, Sakai N, Yokokawa H. Exergetic studies of intermediate-temperature solid oxide fuel cell electrolytes. Journal of Electrochemical Society 2009; 156: B546. doi: 10.1149/1.3072897
  • 2. Jaiswal N, Kumar D, Upadhyay S, Parkash O. Ceria co-doped with calcium (Ca) and strontium (Sr): a potential candidate as a solid electrolyte for intermediate temperature solid oxide fuel cells. Ionics 2014; 20: 45-54. doi: 10.1007/s11581-013-0936-8
  • 3. Wang Y, Mori T, Li J-T, Yajima Y. Low-temperature fabrication and electrical property of $10 mol% Sm_2 O_3 doped CeO_2$ ceramics. Science and Technology of Advanced Materials 2003; 4: 229-238. doi: 10.1016/S1468-6996(03)00051-2
  • 4. Wang F-Y, Chen S, Cheng S. $Gd3^{+}$ and Sm3+ co-doped ceria based electrolytes for intermediate temperature solid oxide fuel cells. Electrochemistry Communications 2004; 6: 743-746. doi: 10.1016/j.elecom.2004.05.017
  • 5. Omar S, Wachsman ED, Nino JC. Higher conductivity Sm3+ and Nd3+ co-doped ceria-based electrolyte materials, Solid State Ionics 2008; 178: 1890-1897. doi: 10.1016/j.ssi.2007.12.069
  • 6. Tianshu Z, Hing P, Huang H, Kilner J. The effect of Fe doping on the sintering behavior of commercial $CeO_2$ powder. Journal of Materials Processing Technology 2001; 113: 463-468. doi: 10.1016/S0924-0136(01)00600-8
  • 7. Gerhardt-Anderson R, Nowick AS. Ionic conductivity of $CeO_2$ with trivalent dopants of different ionic radii. Solid State Ionics 1981; 5: 547-550. doi: 10.1016/0167-2738(81)90313-1
  • 8. Kilner JA. Fast anion transport in solids. Solid State Ionics 1983; 8: 201-207. doi: 10.1016/0167-2738(83)90017-6
  • 9. Hwang CC, Wu TY, Wan J, Tsai JS. Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders. Materials Science and Engineering: B 2004; 111: 49-56. doi: 10.1016/j.mseb.2004.03.023
  • 10. Chen W, Li F, Yu J. Combustion synthesis and characterization of nanocrystalline $CeO_2$ -based powders via ethylene glycol–nitrate process. Materials Letters 2006; 60: 57-62. doi: 10.1016/j.matlet.2005.07.088
  • 11. Sarıboğa V. Comparison of different amino acid combustion agents in the preparation of $Ce_{0.8}Sm_{0.2}O_{1.9}$ based electrolyte materials. ElCezeri Journal of Science and Engineering 2020; 7 (3): 1293-1308. doi: 10.31202/ecjse.717717
  • 12. Tian R, Zhao F, Chen F, Xia C. Sintering of Samarium-doped ceria powders prepared by a glycine-nitrate process. Solid State Ionics 2011; 192: 580-583. doi: 10.1016/j.ssi.2010.08.003
  • 13. Jaiswal N, Upadhyay S, Kumar D, Parkash O. $Sm^{3+} and Sr3{2+}$ co-doped ceria prepared by citrate–nitrate auto-combustion method. International Journal of Hydrogen Energy 2014; 39: 543-551. doi: 10.1016/j.ijhydene.2013.10.009
  • 14. Chen M, Kim B, Xu Q, Ahn B, Kang W. Synthesis and electrical properties of $Ce_{0.8}Sm_{0.2}O_{1.9}$ ceramics for IT-SOFC electrolytes by ureacombustion technique. Ceramics International 2009; 35: 1335-1343. doi: 10.1016/j.ceramint.2008.06.014
  • 15. Wu W, Huang J, Chiba A. Synthesis and properties of samaria-doped ceria electrolyte for IT-SOFCs by EDTA-citrate complexing method. Journal of Power Sources 2010; 195: 5868-5874. doi: 10.1016/j.jpowsour.2009.12.098
  • 16. Patil KC, Aruna ST, Ekambaram S. Combustion synthesis. Current Opinion in Solid State and Materials Science 1997; 2: 158-165. doi: 10.1016/S1359-0286(97)80060-5
  • 17. Gu L, Meng G. Powder synthesis and characterization of nanocrystalline CeO2 via the combustion processes. Materials Research Bulletin 2007; 42: 1323-1331. doi: 10.1016/j.materresbull.2006.10.015
  • 18. Sagadeev EV, Gimadeev AA, Barabanov VP. The enthalpies of formation and sublimation of amino acids and peptides. Russian Journal of Physycal Chemistry 2010; 84: 209-214. doi: 10.1134/S0036024410020093
  • 19. Kyle B. Chemical and process thermodynamics. United States, 1984.
  • 20. Liu B, Zhang Y. $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_3$ nanopowders prepared by glycine–nitrate process for solid oxide fuel cell cathode. Journal of Alloys and Compounds 2008; 453: 418-422. doi: 10.1016/j.jallcom.2006.11.142
  • 21. Lenka R, Mahata T, Sinha P, Tyagi A. Combustion synthesis of gadolinia-doped ceria using glycine and urea fuels. Journal of Alloys and Compounds 2008; 466: 326-329. doi: 10.1016/j.jallcom.2007.11.028
  • 22. Balazs G, Glass R. AC impedance studies of rare earth oxide doped ceria. Solid State Ionics 1995; 76: 155-162. doi: 10.1016/0167- 2738(94)00242-K
  • 23. Guan X, Zhou H, Liu Z, Wang Y, Zhang J. High performance Gd3+ and Y3+ co-doped ceria-based electrolytes for intermediate temperature solid oxide fuel cells. Materials Research Bulletin 2008; 43: 1046-1054. doi: 10.1016/j.materresbull.2007.04.027
  • 24. Segadaes A, Morelli M, Kiminami R. Combustion synthesis of aluminium titanate. Journal of European Ceramic Society 1998; 18: 771- 781. doi: 10.1016/S0955-2219(98)00004-1
  • 25. Pingbo X, Weiping Z, Kuo Y, Long J, Weiwei Z et al. Size-controllable gly–nitrate low temperature combustion synthesis (LCS) ofnanocrystalline $La_x Sr_{1−x}MnO_3$. Journal of Alloys and Compounds 2000; 311: 90-92. doi: 10.1016/S0925-8388(00)00869-0
  • 26. Da Conceião L, Silva AM, Ribeiro NFP, Souza MMVM. Combustion synthesis of $La_{0.7}Sr_{0.3}Co_{0.5}Fe_{0.5}O_3$ (LSCF) porous materials for application as cathode in IT-SOFC. Materials Research Bulletin 2011; 46: 308-314. doi: 10.1016/j.materresbull.2010.10.009
  • 27. Bauerle J. Study of solid electrolyte polarization by a complex admittance method. Journal of Physycal Chemistry of Solids 1969; 30: 2657- 2670. doi: 10.1016/0022-3697(69)90039-0
  • 28. Tianshu Z, Hing P, Huang H, Kilner J. Ionic conductivity in the $CeO_2-Gd_2O_3$ system (0.05 ≤ Gd/Ce ≤ 0.4) prepared by oxalate coprecipitation. Solid State Ionics 2002;. 148: 567-573. doi: 10.1016/S0167-2738(02)00121-2
  • 29. Omar S, Wachsman ED, Jones JL, Nino JC. Crystal structure-ionic conductivity relationships in doped ceria systems. Journal of American Ceramic Society 2009; 92: 2674-2681. doi: 10.1111/j.1551-2916.2009.03273.x
Turkish Journal of Chemistry-Cover
  • ISSN: 1300-0527
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK
Sayıdaki Diğer Makaleler

DFT (density functional theory) studies on cycloisomerization of 15–membered triazatriacetylenic macrocycle

Mohamad Reza TALEI BAVIL OLYAI, Mansooreh MOVAHEDI, Nader ZABARJAD SHIRAZ, Ali EZABADI, Marjaneh SAMADIZADEH

Preparation of G-CuO NPs and G-ZnO NPs with mallow leaves, investigation of their antibacterial behavior and synthesis of bis(indolyl)methane compounds under solventfree microwave assisted dry milling conditions using G-CuO NPs as a catalyst

Maden SULAK

Synthesis of imidazo-1,4-oxazinone derivatives and investigation of reaction mechanism

Volkan TAŞDEMİR

Ultrasound assisted supramolecular liquid phase microextraction procedure for Sudan I at trace level in environmental samples

Özgür ÖZALP, Furkan UZCAN, Mustafa SOYLAK

Low loaded Pt-Co catalyst surfaces optimized by magnetron sputtering sequential deposition technique for PEM fuel cell applications: physical and electrochemical analysis on carbon paper support

Ali Şems AHSEN, Osman ÖZTÜRK, Oğuz Kaan ÖZDEMİR, Aydın HAŞİMOĞLU, İnci KARAASLAN

Investigation of PZT-5H and PZT-8 type piezoelectric effect on cycling stability on SiMWCNT containing anode materials

M. Taha DEMİRKAN, Mehbare DOĞRUSÖZ, Rezan DEMİR ÇAKAN

New iodine-apatites: synthesis and crystal structure

Evgeny N. BULANOV, Sergey S. PETROV, Alexander V. KNYAZEV

Sn(II)/PN@AC catalysts: synthesis, physical-chemical characterization, and applications

Yibo WU, Yongjun HAN, Li WANG, Qinbin LI, Wei MA, Fu XV, Fuxiang LI

Laccase bound to cryogel functionalized with phenylalanine for the decolorization of textile dyes

Bo MATTIASSON, Adil DENİZLİ, Yusuf Doruk ARACAGÖK, Neslihan İDİL, Işık PERÇİN

Characterization of extracts from Papaver rhoeas and potential valorization of these extracts in dyeing applications

Beatrice GEORGE, Mohand Ouidir BOUSSOUM, Abdelkader ALI-NEHARI, Rachida OULDMOKHTAR