Mustafa ALTINOK, Nihat DÖNGEL, Cevdet SÖĞÜTLÜ

141140

The Effects of Press Direction, Wood and Glue Types to the Tensile Strength on "T" Joints with Mortise and Tenon

The effects of press direction, wood and glue types on the tensile strength on "T" joints with mortise and tenon. Mortises and tenons were constructed and opened with a circular saw and glued to "T" joint members made of pine ( Pinus silvestris L.) , beech ( Fagus orientalis L.), chesnut ( Castenea sativa Mill.), cedar ( Cedrus libani), which are widely used in the furniture industry. "T" joints were bonded with side pressure and axial pressure with the following glues: Desmodur-VTKA, PVAc, PVA(pink) and Kleiberit 305. Tension tests were carried out on prepared samples according to DIN 53251 and DIN 53254. It was determined that the highest tensile strength was obtained with the side-pressure-bonded wood of beech and PVAc glue, and the lowest tensile strength was obtained with the axial-pressure-bonded wood of beech and D-VTKA glue.

Anahtar Kelimeler:

"T" joint with mortise and tenon, Wood glues, Wood material, Tensile strength

The Effects of Press Direction, Wood and Glue Types to the Tensile Strength on "T" Joints with Mortise and Tenon

The effects of press direction, wood and glue types on the tensile strength on "T" joints with mortise and tenon. Mortises and tenons were constructed and opened with a circular saw and glued to "T" joint members made of pine ( Pinus silvestris L.) , beech ( Fagus orientalis L.), chesnut ( Castenea sativa Mill.), cedar ( Cedrus libani), which are widely used in the furniture industry. "T" joints were bonded with side pressure and axial pressure with the following glues: Desmodur-VTKA, PVAc, PVA(pink) and Kleiberit 305. Tension tests were carried out on prepared samples according to DIN 53251 and DIN 53254. It was determined that the highest tensile strength was obtained with the side-pressure-bonded wood of beech and PVAc glue, and the lowest tensile strength was obtained with the axial-pressure-bonded wood of beech and D-VTKA glue.

Keywords:

"T" joint with mortise and tenon, Wood glues, Wood material, Tensile strength,

Turkish Journal of Agriculture and Forestry-Cover

ISSN: 1300-011X
Yayın Aralığı: 6
Yayıncı: TÜBİTAK

Arşiv

Sayıdaki Diğer Makaleler

Ceviz (Juglans regia l.) odununun yoğunluğu ve bazı mekanik özellikleri

Ramazan KANTAY, Öner ÜNSAL, Nusret AS

Isosteric Sorption Heat Determination for some Starchy Grains

Serdar ÖZTEKİN, Yurtsever SOYSAL

The Effects of Press Direction, Wood and Glue Types to the Tensile Strength on "T" Joints with Mortise and Tenon

Mustafa ALTINOK, Nihat DÖNGEL, Cevdet SÖĞÜTLÜ

Effects of Humic Acid and Phosphorus Applications on Growth and Phosphorus Uptake of Corn Plant (Zea maysL.) Grown in a Calcareous Soil

İbrahim ERDAL, Mehmet Ali BOZKURT, K. Mesut ÇİMRİN, Siyami KARACA, Mustafa SAĞLAM

Kireçli bir toprakta yetiştirilen mısır bitkisi (Zea mays L.) gelişimi ve fosfor alımı üzeine hümik asit ve fosfor uygulamasının etkisi

İbrahim ERDAL, K. Mesut ÇİMRİN, Siyami KARACA, Mehmet Ali BOZKURT, Mustafa SAĞLAM

Determining the Efficiency of Forward-Sloped Bench Terraces on Soil Conservation: The Case of the Aydın-Bozdoğan-Alamut Terracing Area

Alaettin TAYSUN

Bursa ili ve civarındaki eğili tarrım topraklarının laboratuvar koşullarında su erozyonuna karrşı duyarlılıklarının belirlenmesi üzerine bir araştırma

Zeynal TÜMSAVAŞ, A. Vahap KATKAT

Investigation on the Use of Sludge in Plant Propagation

Ulvi TOLAY, Yavuz YAVUZŞEFİK

Bazı mürdümük (Lathyrus sativus L.) hatları üzerinde yapılan sitolojik araştırmalar

Yaşar KARADAĞ, Uğur BÜYÜKBURÇ

Using the Parcel Transposition Ratio (PYO) in the Evaluation of land Consolidation Projects