VİLOFT/POLYESTER KARIŞIMLI ÖRME KUMAŞLARIN PATLAMA MUKAVEMETİ VE BONCUKLANMA ÖZELLİKLERİNİN ARAŞTIRILMASI
Viloft elyafı modifiye viskon olarak bilinmekte olup özellikle polyester gibi elyaflarla karışım halinde kullanıldığında iplik içerisinde hava boşlukları oluşturduğu için kumaşların termal özelliklerini iyileştirmeye yardımcı olmaktadır. Viloft/polyester karışımlı örme kumaşların bazı mekanik özelliklerini karakterize edebilmek için yapılan bu çalışmada 0/100, 33/67, 50/50, 67/33 ve 100/0 yüzde karışım oranlarında viloft/polyester şeritler elde edilmiş olup bu şeritlerden Ne30/1 lineer yoğunluğunda ring iplikler elde edilmiştir. Bu ipliklerden süprem ve 1x1 ribana yapılarında örme kumaşlar üretilerek bu kumaşların patlama mukavemeti ve boncuklanma özellikleri incelenmiştir. Karışımda viloft oranının artmasıyla patlama mukavemetinin düştüğü görülürken boncuklanma için viloft oranının artmasının anlamlı bir etkisinin olmadığı görülmüştür. Ayrıca 1x1 ribana kumaşların süprem kumaşlara göre boncuklanmaya daha dayanıklı olduğu bulunmuştur.
INVESTIGATION ON BURSTING STRENGTH AND PILLING PROPERTIES OF VILOFT/POLYESTER BLENDED KNITTED FABRICS
Viloft is a modified viscose fiber with a flat cross-section and crenulated surface that maintains air gaps in the yarns, especially used with polyester blends which help to improve the thermal properties of the fabrics. In this study, in order to characterize some mechanical properties of viloft/polyester blended knitted fabrics, 0/100, 33/67, 50/50, 67/33 and 100/0 percentages of viloft/polyester slivers were produced and spun as Ne 30/1 linear density on a ring spinning system. Single-jersey and 1x1 rib fabrics were produced and the bursting strength and pilling properties of these fabrics were measured. Viloft-rich blends, in general, decreased the bursting strength; however there is not a significant effect by changing the viloft percentage in the blend for pilling properties. In addition, the pilling values of 1x1 rib fabrics are more than single jersey fabrics.
___
- Kelheim Fibres, (2015), Speciality Viscose Fibres, http://www. kelheim-fibres.com/produkte/vi_te_uk.php, (Erişim tarihi: 18 Ocak 2015).
- Demiryurek, O., Uysalturk, D., (2013), Thermal comfort properties of Viloft/cotton and Viloft/polyester blended knitted fabrics, Textile Research Journal, 83(16), 1740-1753.
- Demiryurek, O., Uysalturk, D., (2014), Statistical Analyses and Properties of Viloft/Polyester and Viloft/Cotton Blended Ring-Spun Yarns, Fibres&Textiles in Eastern Europe, 22(1), 22-27.
- Atasagun, H.G., Oner, E., Okur, A., Beden, A.R., (2015), A comprehensive study on the general performance properties of viloft-blended knitted fabrics, Journal of The Textile Institute, 106(5), 523-535.
- Akaydın, M., Can, Y., Ören, Ö., Özerdoğan, M.A., (2009) Ring Penye ve Kompakt İpliklerden Örülen Temel Atkılı Örme Kumaşların Patlama Mukavemetleri Üzerine Bir Araştırma, Tekstil ve Mühendis, 16(73-74), 16-20.
- Okur, A., (2002), Tekstil Materyallerinde Mukavemet Testleri, DEÜ Mühendislik Fakültesi Basım Ünitesi.
- Kayseri, G.O., Bozdogan, F., Hes, L., (2010), Performance Properties of Regenerated Cellulose Fibers, Tekstil ve Konfeksiyon, 20(3), 208-212.
- Hussain, U., Bin Younis, F., Usman, F., Hussain, T., Ahmed, F., (2015), Comfort and Mechanical Properties of Polyester/Bamboo and Polyester/Cotton Blended Knitted Fabric, Journal of Engineered Fibers and Fabrics, 10(2), 61-69.
- Kan, C.W., (2015), Relationship between bursting strength and ultraviolet protection property of 100% cotton-knitted fabrics, Journal of The Textile Institute, 106(9), 978-985.
- Celik, P., Ute, T.B., Kadoglu, H., (2012), Comparative analysis of the physical properties of the fabrics knitted with sirospun and ring spun yarns produced by short and long staple fibres, Tekstil ve Konfeksiyon, 22(4),324-331.
- Mahish, S.S., Patra, A.K., Thakur, R., (2012), Functional properties of bamboo/polyester blended knitted appparel fabrics, Indian Journal of Fibre & Textile Research, 37(3), 231-237.
- Gun, A.D., (2011), Dimensional, Physical and Thermal Properties of Plain Knitted Fabrics Made from 50/50 Blend of Modal Viscose Fiber in Microfiber Form with Cotton Fiber, Fibers and Polymers, 12(8), 1083-1090.
- Pamuk, G., (2015), Multi Response Optimization for Bursting Strength and Pill Density of Lacoste Fabrics, Journal of Engineered Fibers and Fabrics, 10(1), 128-134.
- Mezarcioz, S., Ogulata, R.T., (2010), Optimization of bursting strength of single jersey fabrics with taguchi orthogonal design, Tekstil ve Konfeksiyon, 20(4), 320-328.
- Unal, P.G., Ureyen, M.E., Mecit, D., (2012) Predicting properties of single jersey fabrics using regression and artificial neural network models, Fibers and Polymers, 13(1), 87-95.
- Ertugrul, S., Ucar, N., (2000) Predicting bursting strength of cotton plain knitted fabrics using intelligent techniques, Textile Research Journal, 70(10), 845-851.
- Uysaltürk, D., (2013), Viloft/Pamuk ve Viloft/Polyester Karışımlı İplik Özelliklerinin ve Örme Kumaş Termofizyolojik Konfor Özelliklerinin İncelenmesi, Yüksek Lisans Tezi, Erciyes Üniversitesi Fen Bilimleri Enstitüsü (185s.).
- Design Expert 6.01 Software, Stat Ease Inc, Minnapolis MN, 2001.