A. Ebru TAYYAR, Fatıma SARI, İsmahan YAĞIZ

Gömleklik kumaşlarda yapısal parametrelerin kumaş aşınma direncine etkileri

Bu çalışmada, farklı yapısal parametrelere sahip pamuk/PES karışımı gömleklik dokuma kumaşlar sabit tur sayılarında aşındırma işlemine tabi tutularak yapısal parametrelerin yüzey aşınmasına etkileri incelenmiştir.Üç farklı atkı sıklığı ve üç farklı örgü tipine sahip dokuz kumaşta 10000 ve 20000 devir sonunda ağırlık kayıpları tespit edilmiştir. Atkı sıklığının ve örgü tipinin kumaşların aşınma dayanımına etkilerinin önemli olduğu görülmüştür.

The effects of structural parameters of shirting fabrics on abrasion resistance

In this study, cotton/PES shirting woven fabrics with different structural parameters were subjected to abrasion processes under constant number of cycles with the aim to investigate the effect of structural parameters of fabrics on abrasion properties. The mass losses of nine fabrics with three different pick densities and three different weave structures were recorded at the end of 10000 and 20000 cycles. It was observed that the pick density and weave type have affected the abrasion resistance of fabrics.

PDF

___

1. Sülar.V., Okur A. (2001), Kumaşlarda Aşınma ve Eskime, Tekstil Maraton, 11,55,28-40
2. Backer, S., Tanenhaus,S.J., (1951), The Relationship Between the Structural Geometry of a Textile Fabric and Its Physical Properties: Part III: Textile Geometry and Abrasion-Resistance, Textile Research Journal, 21,9,635-654
3. Ahmed, M., Slater, K, (1989), The Progressive Deteoriation of Textile Materials Part TV: The Effect of Accelerator Abrasion on the Comfort Properties of Fabrics, Journal of the Textile Institute, 80, 279-284
4. Alston, P.V., (1992), Effect of Yarn Spinning System on Pill Resistance of PET/Cotton Knit Fabrics, Textile Research Journal, 62,3,105-108
5. Ning, P., Zeronian S.H., (1993), An Alternative Approach to the Objective Measurement of Fabrics, Textile Research Journal, 63,1, 33-43
6. Özdemir, Ö., Çeven, E. K, (2004), Influence of Chenille Yarn Manufacturing Parameters on Yarn and Upholstery Fabric Abrasion Resistance, Textile Research Journal, 74, 6, 515-520
7. Mansour M., Peter, R.L., (1973), Comparison of Physical Properties of Fabrics Woven from Open End and Ring Spun Yarns, Textile Research Journal, 43, 3,154-166
8. Adanur, S., Gowayed, Y., Thomas, H., Ghosh, T., (2000), On-Line Measurement of Fabric Mechanical Properties for Process Control, Auburn University, 196-A09, 7p.
9. Can Y. (2008), Pilling Performance and Abrasion-Characteristics of Plain-Weave Fabrics Madefrom Open - End and Ring Spun Yarns, Fibres & Textiles in Eastern Europe, January / March, 16,1(66), 81-84
lO.Saville B. P., (2000), Physical Testing of Textiles, Woodhead Publishing Limited, England
11. Collier, B. J., Epps, H. H., (1998). Textile Testing and Analysis, Prentice Hall, New Jersey
12. Kalaoglu, F., Önder, E., Özipek, B., (2003), Influence Of Varying Structural Parameters On Abrasion Characteristics of 50/50 Wool/Polyester Blended Fabrics, Textile Research Journal, 73, 11, 980-984.
13. Kaynak, H.K., Topalbekiroğlu M., (2008), Influence of Fabric Pattern on the Abrasion Resistance Property of Woven Fabrics, Fibres & Textiles in Eastern Europe, January / March, 16,1 (66), 54-56
14. TS 251 (1991), "Dokunmuş Kumaşlar-Birim Uzunluk ve Birim Alan Kütlesinin Tayini"
15.TS 254 (1989), "Dokunmuş Kumaşlar - İmal Tarzı - Analiz Metotları - Kumaştaki İpliğin Kısalma Oranının Tayini"
16. TS 250 EN 1049-2 (1996), "Tekstil Dokunmuş Kumaşlar-Yapı Analiz Metotları-Kısım 2-Birim Uzunluktaki İplik Sayısının Tayinf
17. TS EN ISO 12947-3 (2001), "Tekstil - Martindale Metoduyla Kumaşların Aşınmaya Karşı Dayanımının Tayini- Bölüm 3: Kütle Kaybının Tayini"