Farklı ölçüm yöntemleri ile kumaş boncuklanma eğiliminin değerlendirilmesi

Genellikle örme kumaşlarda oluşan boncuklanma ciddi bir problem olup kumaşa kötü bir görünüm kazandırmanın yanında, bazen delik oluşumlarına bile yol açan eskimelerin önemli bir kaynağını oluşturmaktadır. Normal kullanımı simule eden, test koşullarında kumaşın boncuk oluşturma eğilimini belirleyen test metotları ve laboratuar test cihazları geliştirilmiştir. Bu çalışmada, 3 farklı iplik numarası, 3 farklı büküm katsayısı ve 2 farklı kumaş sıklığında toplam 16 kumaş kullanılarak, kumaşların boncuklanma özellikleri yaygın olarak kullanılan 3 boncuklanma test cihazında (Martindale, ICI ve düşey taklalı) test edilmiştir. Boncuklanmanın objektif değerlendirmesi için, PillGrade Otomatik Boncuk Değerlendirme Sistemi kullanılmıştır. Değişken parametrelerin ve boncuklanma test yöntemlerinin, kumaşların boncuklanma derecesi, toplam boncuk sayısı ve toplam ağırlıklı boncuk sayısı üzerine etkileri istatistiksel olarak değerlendirilmiştir. Test sonuçlarına göre, yapısal özellikler arasından sadece iplik numarasının, PillGrade tarafından belirlenen boncuklanma derecesi üzerine etkisi istatistiksel olarak önemli bulunmuştur. Martindale ve düşey taklalı boncuklanma test cihazında test edilen kumaşların boncuklanma dereceleri arasındaki farklılık istatistiksel olarak önemli bulunmazken, ICI boncuklanma yöntemine göre test sonuçlarının diğer yöntemlere göre oldukça farklı olduğu belirlenmiştir.

Evaluation of fabric pilling density with measurement methods

Pilling which generally occurs in knitted fabrics is a serious problem and in addition to giving an unsightly appearance to the fabric, it can also be a serious source of wear, sometimes eventually causing holes. Test methods and laboratory testing machines are developed for the determination of the propensity of a fabric to form pills from fuzz under test conditions intended to simulate normal wear. In this study, by using 16 different fabrics with 2 different fabric tightness and made of yarns with 3 different yarn counts and 3 different yarn twist coefficient, pilling characteristics of the fabrics were tested using 3 mostly preferred pilling testers (Martindale, ICI and random tumble). For the objective evaluation of the pilling, PillGrade instrument was used. The effects of the changed parameters and the pilling test methods on the pilling degree, total pill count and total weighted pill count values of the fabrics were statistically evaluated. According to the test results, among the structural parameters only the yarn count was found to have statistically significant effect on the pilling degree values evaluated by PillGrade. The difference between the pilling degree values of the fabrics tested with Martindale and random tumble methods have been found statistically not important whereas the results of ICI pilling box method are quite different from the other methods.

___

  • 1. Ukponmwan J.O, Mukhopadhyay A., Chatterjee K.N., (1998), Pilling, The Textile Institute, 28(3), pp. 16-42.
  • 2. http://home.comcast.net/~roadska/alta.pdf, Understanding the Science of Pilling: The Untold Story
  • 3. Hearle, J.W.S. Wilkins A.H., (2006)Mechanistic modelling of pilling. Part I: Detailing of mechanisms, Journal of The Textile Institute, 97(4), 359-368.
  • 4. XI B., .Hu I., YAN H., (2002), Objective Evaluation of Fabric Pilling Using Image Analysis Techniques, Textile Research. Journal, 72(12), 1057-1064.
  • 5. Kim S.C, Kang t.j., (2005), Image Analysis of Standard Pilling Photographs Using Wavelet Reconstruction 1, Textile Research Journal, 75(12), 801-811.
  • 6. Biermann I., (2001), Pilling Tendency of Textiles-Special Features of Measurement and Assessment, Melliand, 4, E83-E84.
  • 7. Göktepe, Ö., (2002), Fabric Pilling Performance and Sensitivity ofSeveral Pilling Testers, Textile Research Journal, 72(7), 625-630
  • 8. Esteves M.F, Fonte A. R, Fernandes F.M., (2004), Comparative Study On Pilling Resistance Standard Methods, World Textile Conference - 4th AUTEX Conference Roubaix, June 22-24.
  • 9. ASTM D 3 512 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Pabrics: Random Tumble Pilling Tester
  • 10. Jackson T., Keyes N.M., Haris P., Holden J.B.,( 2005), A Preliminary Report: Fuzz and Pilling Surface Changes on Cotton Fabrics Measured By Linetech Industries' Image Analysis System, Beltwide Cotton Conferences, New Orleans, Louisiana - January 4 -7, pp.2219-2228
  • 11. PillGrade Automated 3D Pilling & Fuzz Grading System Operating Manual, SDL Atlas, Line Tech Industries
  • 12. ASTM D 4970 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
  • 13. TS EN ISO 12945-1 Textiles - Determination of fabric propensity to surface fuzzing and to pilling — Part 1: Pilling box method
Tekstil ve Mühendis-Cover
  • ISSN: 1300-7599
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1987
  • Yayıncı: TMMOB Tekstil Mühendisleri Odası