DENİM PANTOLONLARDA KULLANILAN ZİNCİR VE DÜZ DİKİŞİN DİKİM PERFORMANSININ İNCELENMESİ

Denim pantolon konfeksiyon sektöründe en fazla tercih edilen giysidir. Kot pantolonunda kullanılan dikişlerin sağ lamlığı, ürünün kalitesi için çok önemlidir. Giysinin dikim performansı, kumaşın doku tipi, kumaş kalınlığı, gramaj ı, iplik sıklığı gibi yap ısal özelliklerine ve dikiş tiplerine bağlıdır. Dikiş mukavemeti ve dikiş yeterliliği dikim performansı için iki önemli parametredir. Bu çalışman ın amacı, denim pantolonunda kullanılan zincir dikişin ve düz dikişin dikim performansını belirlemektir. Bu nedenle, elastanlı ve elastansız pamuklu denim dokuma kumaşların kumaş mukavemeti, dikiş mukavemetini ve dikiş yeterliliği test edilmiştir.

INVESTIGATION OF SEAM PERFORMANCE OF CHAIN STITCH AND LOCKSTITCH USED IN DENIM TROUSERS

Denim trouser is the most preferred garment in the clothing industry. The seam performance of the stitches of denim trouser is very important for the quality of the product. Seam perfromance of garment depend on fabric structural properties such as weave type, fabric thickness, weight, yarn density and stitch types. Seam strength and seam efficiency are two important parameters for seam performance. The purpose of this study is to determine the seam performance of the chain stitch and lockstitch used in denim trouser. For this reason, fabric strength, seam strength and seam efficiency of cotton denim woven fabrics with elastane and without elastane which are widely used in garment have been examined.

PDF

___

1. Çeven, E.K., Eren, H. A., Karakan Günaydın, G., Sevim, Ö., Şan,C., (2018), Effect of Washing Cycle on Tenacity and Stretching Properties of Denim Fabrics Containing Elastane, Journal of Fashion Technology & Textile Engineering, S5:002, 1-5, DOI: 10.4172/2329-9568.S5-003
2. Türksoy, H.G., Kılıç, G., Ustundag, S. and Yılmaz, D., (2019), A Comparative Study on Properties of Dual-Core Yarns, The Journal of Textile Institute, 110(7), 980-988, DOI: 10.1080/00405000. 2018.1534541
3. Özdil, N., (2008) Stretch and Bagging Properties of Denim Fabrics Containing Different Rates of Elastane. Fibres & Textile in Eastern Europe, 16(1), 63-67
4. Rajput, B., Kakde, M., Gulhane, S., Mohite, S., and PP, R., (2018). Effect of Sewing Parameters on Seam Strength and Seam Efficiency, Trends in Textile Engineering and Fashion Technology, 4(1). 1-5, DOI: 10.31031/TTEFT.2018.04.00057
5. Choudhary, A. K., and Amit Goel. (2013), Effect of Some Fabric and Sewing Conditions on Apparel Seam Characteristics, Journal of Textiles, 2013, 1-7, DOI: 10.1155/2013/157034
6. Nayak, R., Padhye, R. and Gon, D.P. (2010) Sewing Performance of Stretch Denim, Journal of Textile and Apparel Technology and Management, 6(3), 1-9.
7. ASTM D 6193-16 ( 2016), Standard Practices for Stitches and Seams. Annual Book of ASTM Standards, USA.
8. Gurarda, A., (2008) Investigation of Seam Performance of PET/Nylon-Elastane Woven Fabrics, Textile Research Journal, 78(1), 21-27. DOI: 10.1177/0040517507082636
9. Akter, M. and Khan, M.R., (2015) The Effect of Stitch Types and Sewing Thread Types on Seam Strength for Cotton Apparel, International Journal of Scientific & Engineering Research, 6(7),198-205. ISSN 2229-5518
10. Amirbayat, J., (1994) Seams of Different Ply Properties Part II: Seam Strength, The Journal of the Textile Institute, 84(1), 31-38. DOI:10.1080/00405009208631191
11. Hunter, L. (2009) Durability of Fabrics and Garments, Engineering Apparel Fabrics and Garments edited by J. Fan and L.Hunter, Woodhead Publishing, 161-195.
12. Seetharam G. and Nagarajan L.,(2014) Evaluation of Sewing Performance of Plain Twill and Satin Fabrics Based on Seam Slippage Seam Strength and Seam Efficiency, Journal of Polymer and Textile Engineering, 1(3), 9-21. e-ISSN: 2348-019X
13. Laing, R.M. and Webster, J. (1998) Stitches and Seams, The Textile Institute, 141 p.
14. Mehta, V.H., An Introduction of Quality Control for the Apparel Industry, Milwauke, Wisconsin, USA, 88-89.
15. Mukhopadhyay, A., Chatterjee, A. and Ahuja, T., (2014), Seam Performance of the Inseam of a Military Trouser in Relation to Garment Fit, Textiles and Light Industrial Science and Technology, 3, 29-36.
16. Malek, S., Kheder, F., Jaouachi, B. and Cheikhrouhou, M., (2019), Influence of Denim Fabrics Properties and sewing Parameters Upon the Seam Slippage and Seam Quality Prediction, journal of Textile and apparel Technology and Management, 11(1), 1-17.
17. Malek, S., Jaouachi, B., Khedher, F., Ben said, S. and Cheikrouhou, M., (2016), Influence of Denim fabric Properties and Sewing Parameters Upon the Seam Puckering, International Journal of Applied Research on Textile, 4(1), 33-46.
18. Sülar, V., Meşegul, C., Kefsiz, H. and Seki, Y., (2014), A Comparative Study on Seam Performance of Cotton and Polyester Woven Fabrics, The Journal of the Textile Institute, 106(1), 1-12.
19. Haghighat, E., Etrati, S. And Najar, S.S. (2014), Evaluation of Woven Denim Fabric Sewability Based on Needle Penetration Force, Journal of Engineered Fibres and Fabrics, 9(2), 47-60.
20. Behera, B.K., Chand, S., Singh, T.G. and Rathee, P., (1997), Sewability of Denim, International Journal of Clothing Science and Technology, 9(2), 128-140.
21. Maarouf, A., (2015), Effect of the Seam efficiency and Puckering on Denim Sewability, Journal of Basic and Apparel Scientific Research, 5(10), 24-32.
22. ASTM D 3776-09a (2017). Standard Test Method for Mass Per Unit Area of Fabric. Annual Book of ASTM Standards, USA.
23. ASTM D 3775-17 (2017). Standard Test Method for End and Pick Count of Woven Fabric. Annual Book of ASTM Standards, USA.
24. ASTM D 1683-11a (2011). Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics. Annual Book of ASTM Standards, USA.
25. Namiranian, R., Najar, S.S., Etrati, S.M. and Manich, A., (2014), Seam Slippage and Seam Strength Behavior of Elastic Woven Fabrics Under Static Loading, Indian Journal of Fibre & Textile Research, 39, 221-229.
26. Gurarda, A., (2019), Seam Performance of Garments, In: Textile Manufacturing Process. (Eds) Uddin, F., Intech Open, 110-117, ISBN 978-1-78985-106-9.