GLİOKSAL ÇAPRAZ BAĞLAYICI VE NaCl TUZ İLAVESİNİN SİLİNDİRLİ ELEKTRO LİF ÇEKİMİ İLE POLİVİNİL ALKOL NANO LİF ÜRETİMİ ÜZERİNE ETKİSİ

Bu çalışmada; silindirli elektro lif çekimi ile polivinil alkol (PVA) nano lif üretiminde, glioksal çapraz bağlayıcı ve sodyum klorit (NaCl) tuz ilavesinin çözelti özellikleri (iletkenlik, yüzey gerilimi, viskozite), lif çekim performansı ve lif özellikleri (çap ve çap üniformitesi) üzerindeki etkileri tartışılmaktadır. Elde edilen sonuçlara göre; glioksal çapraz bağlayıcı ve NaCl tuz ilavesi ile çözelti iletkenliği, viskozite ve lif çapı artmaktadır. Diğer yandan, PVA lif çekim performansı çapraz bağlama işlemi ile artmakta, fakat NaCl tuz konsantrasyonu artışı ile azalmaktadır. Buna ilaveten; NaCl tuz konsantrasyonu ile lif çapı üniformitesi arasında herhangi bir ilişki bulunmamaktadır. Genel olarak, silindirli elektro lif çekim yöntemi ile yüksek lif yoğunluğu, ince ve homojen PVA nano lifler elde edilmiştir

Anahtar Kelimeler:

Polivinil alkol, Çapraz bağlama, NaCl, Silindirli elektro lif çekimi, Nano lif

THE EFFECT OF GLYOXAL CROSS-LINKER AND NaCl SALT ADDITION ON THE ROLLER ELECTROSPINNING OF POLY(VINYL ALCOHOL) NANOFIBERS

In this study, the effects of the addition of glyoxal cross-linker and sodium chloride (NaCl) salt on the solution properties (conductivity, surface tension, viscosity), spinning performance and fiber properties (diameter and diameter uniformity) in roller electrospinning of poly(vinyl alcohol) (PVA) are discussed. According to the results, solution conductivity, viscosity and fiber diameter increase with the addition of glyoxal cross-linker and NaCl salt. On the other hand, the spinning performance of PVA increases with cross-linking treatment, but decreases as the NaCl salt concentration increases. In addition, there is no relation between NaCl concentration and fiber diameter uniformity. Generally, high fiber density, fine and uniform PVA nanofibers were obtained via the roller electrospinning method

Keywords:

Poly(vinyl alcohol), Cross-linking, NaCl, Roller electrospinning, Nanofiber,

PDF

___

1. Qin, X-H. and Wang, S-Y., 2006, “Filtration properties of electrospinning nanofibers”, Journal of Applied Polymer Science, 102, pp:1285–1290.
2. Vasita, R. and Katti, D. S., 2006, “Nanofibers and their applications in tissue engineering”, International Journal of Nanomedicine, 1(1), pp:15–30.
3. Kostakova, E., Meszaros, L. and Gregr, J., 2009, “Composite nanofibers produced by modified needleless electrospinning”, Materials Letters, 63, pp:2419- 2422.
4. Park, H., 2010, “Electrospinning of nanofibers for filtration media”, Ph.D. Thesis, University of Florida, pp:121.
5. Linh, N. T. B. and Lee, B-T., 2011, “Electrospinning of polyvinyl alcohol/gelatin nanofiber composites and cross-linking for bone tissue engineering application”, Journal of Biomaterials Applications, 27(3), pp:255–266.
6. Yarin, A. L. and Zussman, E., 2004, “Upward needleless electrospinning of multiple nanofibers”, Polymer, 45, pp:2977-2980.
7. Jirsak, O., Sanetrnik, F., Lukas, D., Kotek, V., Martinova, L. and Chaloupek, J., 2005, “A method of nanofibers production from a polymer solution using electrostatic spinning and a device for carrying out the method”, U.S. Patent, WO2005024101.
8. 8. Tomaszewski, W. and Szadkowski, M., 2005, “Investigation of electrospinning with the use of a multi-jet electrospinning head”, Fibres & Textiles in Eastern Europe, 13(4), pp:22-26.
9. Dosunmu, O. O., Chase, G. G., Kataphinan, W., et al., 2006, “Electrospinning of polymer nanofibres from multiple jets on a porous tubular surface”, Nanotechnology, 17, pp:1123-1127.
10. Liu, Y. and He, J-H., 2007, “Bubble electrospinning for mass production of nanofibers”, International Journal of Nonlinear Sciences and Numerical Simulation, 8(3), pp:393-396.
11. Dao, A. T. and Jirsak, O., 2010, “Effect of cross-linking agent on the electrospinning of poly(vinyl) alcohol”, 7th International Conference-TEXSCI 2010.
12. Cengiz, F., Dao, T. A. and Jirsak, O., 2010, “Influence of solution properties on the roller electrospinning of poly(vinyl alcohol)”, Polymer Engineering and Science, 50, pp:936-943.
13. Dao, A. T., 2011, “The role of rheological properties of polymer solutions in needleless electrostatic spinning”, Ph.D. Thesis, Technical University of Liberec, Liberec, Czech Republic.
14. Adomaviciüte, E. and Stanys, S., 2011, “Formation of electrospun PVA mats on different types of support materials using various kinds of grounded electrodes”, Fibres & Textiles in Eastern Europe, 19, pp:34-40.
15. Carraher, C.L.E. and Moore, J., 1983, “Modification of polymers”, Plenum, New York.
16. Ding, B., Kim, H-Y., Lee, S-C., et al., 2002, “Preparation and characterization of nanoscaled poly(vinyl alcohol) fibers via electrospinning”, Fibers and Polymers, 3(2), pp:73-79.
17. Qin, X-H. and Wang, S-Y., 2008, “Electrospun nanofibers from crosslinked poly(vinyl alcohol) and its filtration efficiency”, Journal of Applied Polymer Science, 109, pp: 951-956.
18. Lee, J-H., Lee, U-S., Jeong, K-U., et al., 2010, “Preparation and characterization of poly(vinyl alcohol) nanofiber mats crosslinked with blocked isocyanate prepolymer”, Polymer International, 59, pp:1683-1689.
19. Tang, C., Saquing, C. D., Harding, J. R., et al., 2010, “In situ cross-linking of electrospun poly(vinyl alcohol) nanofibers”, Macromolecules, 43, pp:630-637.
20. http://en.wikipedia.org/wiki/Wilhelmy_plate (24.02.2014).
21. Cengiz-Çallıoğlu, F., Jirsak, O. and Dayık, M., 2013, “Investigation into the relationships between independent and dependent parameters in roller electrospinning of polyurethane”, Textile Research Journal, 83(7), pp:718-729.
22. Yalçınkaya, B., Yener, F., Jirsak, O. and Cengiz-Çallıoğlu, F., 2011, “Influence of NaCl concentration on the Taylor cone number and spinning performance”, Strutex 2011, TUL, Czech Republic.
23. Lukas, D., Sarkar, A. and Pokorny, P., 2008, “Self-organization of jets in electrospinning from free liquid surface: A generalized approach”, Journal of Applied Physics, 103, pp:084309.
24. Yalçınkaya, B. and Cengiz-Çallıoğlu, F., 2011, “The effect of supporting material type on the nano fiber morphology”, NanoCon Conference Proocedings, Czech Republic.
25. Cengiz-Çallıoğlu, F., 2011, “Polyurethane nanofiber production by roller electrospinning method”, Ph.D. Thesis, Süleyman Demirel University, Isparta, Turkey.
26. Cengiz, F. and Jirsak, O., 2009, “The effect of salt on the roller electrospinning of polyurethane”, Fibers and Polymers, 10(2), pp:177-184.
27. Dao, A. T. and Jirsak, O., 2009, “Effect of sodium chloride on the needle electrospinning of poly(vinyl alcohol)”, Nanocon, 20-22 October 2009, Roznov pod Radhostem, Czech Republic.
28. Shenoy, S. L., Bates, W. D., Frisch, H. L. and Wnek, G. E., 2005, “Role of chain entanglements on fiber formation during electrospinning of polymer solurions:good solvent, non-specific polymer-polymer interaction limit”, Polymer, 46, pp:3372-3384.
29. Dao, A. T. and Jirsak, O., 2009, “Contribution to study of needleless electrospinning mechanism”, Nanofibers for the 3rd Millennium-Nano for Life, March 11-12, Prague, Czech Repu