EVALUATION OF CORE VISIBILITY RATIO FOR HYBRID YARNS USING IMAGE PROCESSING TECHNIQUE

Hibrit iplikler için estetik değerlerinin teknik performansları ile optimize edilmesi gereklidir. Bu çalışmada, hibrit ipliklerde öz görünürlük oranını (CVR) belirlemek için yeni bir yöntem geliştirildi. Bu yeni yöntem, üç farklı üretim yöntemi (ring-özlü iplik, siroözlü iplik, kompakt-özlü iplik) ve üç farklı iplik numarasında (Ne 18, Ne 24, Ne 30) paslanmaz çelik (SS) tel ve pamuk lifleri içeren hibrit ipliklerin estetik farklılıklarını belirlemek için kullanıldı

HİBRİT İPLİKLERDE ÖZ GÖRÜNÜRLÜK ORANININ GÖRÜNTÜ İŞLEME TEKNİĞİ KULLANILARAK DEĞERLENDİRİLMESİ

Aesthetic values are needed to be optimized with technical performances for hybrid yarns. In this study, a new method is proposed to determine the core visibility ratio (CVR) of the hybrid yarns. The new method is used to determine aesthetic differences of hybrid yarns manufactured by three different production methods (ring core-spun, siro core-spun, compact core-spun), and three different yarn counts (Ne 18, Ne 24, Ne 30) containing stainless steel (SS) wire and cotton fibers

PDF

___

1. Mohsen S., Behnaz B., Samira A., 2011, "Coating of Core Yarn. An Alternative Method of Decreasing the Strip-back Phenomenon of Core-spun Yarns", Fibre. & Text. in Eastern Europe, Vol. 19, No: 5 (88), pp. 28-32.
2. Ortlek H. G., Caliskan C., Kurban R., 2013, "A Comparative Study On The Physical Properties Of Hybrid Yarns Containing Copper Wire", J. Text. and Eng., Vol. 20, pp.11-20.
3. Gharahaghaji A. A., Zargar E. N., Ghane M., 2010, "Cluster-Spun Yarn-A New Concept in Composite Yarn Spinning", Text. Res. J., Vol. 80 , No: 1, pp. 19-24.
4. Ziaee, M., Borhani, S., Shanbeh, M., 2011, “Evaluation of physical and mechanical properties of cotton covered polypropylene-core yarns and fabrics”, Industria Textila, Vol. 62, No: 1, pp. 9-13.
5. Erez E., Çelik P., 2014, "A Research On The Parameters of The Affecting Yarn Properties of Cotton-Polyester Rigid Core-Spun Yarns", Tekstil ve Konfeksiyon, Vol. 24(2), pp. 195-201.
6. Pramanik P., Patil V. M., 2009, "Physical Characteristics of Cotton/Polyester Core Spun Yarn Made Using Ring and Air-Jet Systems", AUTEX Res. J., Vol. 9, No. 1, March, pp 14-19.
7. Duran D., Kadoğlu H., 2012, "A Research On Electromagnetic Shielding With Copper Core Yarns", Tekstil ve Konfeksiyon, Vol. 4, pp. 354-359.
8. Ortlek H. G., Kilic G., Okyay G., 2011, " Investigation of Different Ring Spinning Methods for Producing Core Spun Yarns Containing Stainless Steel Wire", Tekstil ve Konfeksiyon, Vol. 3, pp. 225-235.
9. Almetwally. A. A., Idrees, H. M. F., Hebeish A. A., 2014, "Predicting the Tensile Properties of Cotton/Spandex Core-Spun Yarns Using Artificial Neural Network and Linear Regression Models", J. Text. Inst., Vol. 105, No 11.
10. Hyung J. K., Jong S. K., Jung H. L., 2009, "Detection of Wrapping Defects by a Machine Vision and its Application to Evaluate the Wrapping Quality of the Ring Core Spun Yarn", Text. Res. J., Vol. 79, No. 17, pp. 1616-1624.
11. Su C .I., Maaand M. C., Yang H.Y., 2004, "Structure and performance of elastic core-spun yarn yarns", Text. Res. J., Vol. 74 (7), pp. 607–610.
12. Sawhney A. P. S., Ruppenicker G. F., Kimmel L. B., 1992, "Comparison of Filament-core Spun Yarns Produced by New and Conventional Methods", Text. Res. J., Vol. 62(2), pp. 67–73.
13. Turksoy H.G., Ustundag S., 2015, "Elastic hybrid yarns for denim fabrics", Industria Textila, Vol. 66(5), 306-313.
14. Miao M., Howand Y. L., Ho S. Y., 1996, "Influence of spinning parameters on core yarn sheath slippage and other properties" Text. Res. J., Vol. 66(11), pp. 676–684.
15. Vuruşkan D., Babaarslan O., İlhan İ., 2011, " Effect of Production Parameters on Strength and Elongation Of The Selected Yarns Containing Elastane", Tekstil ve Konfeksiyon, Vol. 1, pp. 22-29.
16. Ortlek H.G., Kilic G., Yolacan G., 2010, "Color and Whiteness Properties of Fabrics Knitted from Different Hybrid Core-Spun Yarns Containing Metal Wire" Fibers and Polymers, 2010, Vol.11(7), 1067-1074.
17. Miao M., Barnes S., Vuckovic L., 2009, "High-Speed Video Graphic Studyo Filament-Core Yarn Spinning", J. Text. Inst., Vol. 101(3), pp. 242-252.
18. Aslantas V., Kurban R., Toprak A. N., 2015, "An Interactive Web Based Toolkit For Multi Focus Image Fusion", J. Web Eng., Vol. 14(1), pp. 117-135.
19. Baxes G. A,. 1994, Digital Image Processing, John Wiley & Sons, Inc., New York, pp. 452.
20. Yaman K., Sarucan A., Atak M., 2001, "Preperation Of Data For Dynamic Scheduling Using Image Processing And Arima Models", Mag. Gazi Uni. Eng. and Arch. Fac., No.16 (1), pp. 19-40.
21. Gonzales C. R., Woods E. R., 2009, Digital Image Processing, Prentice Hall, Upper Saddle River, New Jersey, 2nd ed., pp. 596.
22. TS 244 EN ISO 2060, 1999, Textiles-Yarn from packages- Determination of linear density (mass per unit length) by the skein method.