Cemile Emel YAZ, Cem GÜNEŞOĞLU, Mehmet TOPALBEKİROĞLU

An Investigation on Some Mechanical Properties of the Tuft Carpets Produced by Homopolymer, Copolymer and Thermoplastic Polyolefin Mixed Polypropylene Bulked Continuous Filament Yarns

There are several parameters that affect the mechanical properties of carpets such as yarn characteristic and carpet construction. Yarn material is one of the most important factors which determine the usage performance of carpets by consumers. This study investigated the mechanical behaviours of carpets produced from polypropylene (PP) bulk continuous filament (BCF) yarns with not only homopolymer but also copolymer and thermoplastic polyolefin mixed. In this respect, ten carpet samples produced by different type of BCF yarns as pile were examined. Experimental results indicated that mixing polypropylene homopolymer with copolymer or thermoplastic polyolefin resulted with improvement in thickness loss and resilience properties. In addition, thermoplastic polyolefin included yarn exhibited higher performance compared to copolymer mix in both dynamic and static loading. PP BCF yarn type had considerable influences on compressibility behaviours of carpets, whereas there was no significant effect on tuft withdrawal force.

Keywords:

Carpet, BCF yarn, polymer mixing polypropylene homopolymer, copolymer, thermoplastic polyolefin,

PDF

___

1. Crawshaw, G.H., 2002. Carpet Manufacture. New Zealand, Wronz Developments, Chapter 3 Pile Yarns.
2. Crawshaw, G.H., 2002. Carpet Manufacture. New Zealand, Wronz Developments, Chapter 2 Pile Fibers.
3. Crawshaw, G.H., 2011. Specialist Yarn and Fabric Structures Developments and Applications. Woodhead Publishing Limited, Chapter 9 Pile Carpets.
4. Hannay, F. 2002. Rigid Plastics Packaging Materials. Processes and Applications, Rapra Technology Limited, 13(7).
5. Tripathi, D. 2002. Practical Guide to Polypropylene, Rapra Technology Limited.
6. Brydson, J.A. 1995. Thermoplastic Elastomers – Properties and Applications, Rapra Technology Limited, 7(9).
7. Massey, L. K. 2004. Film Properties of Plastics and Elastomers, A Guide to Nonwovens in Packaging Applications, Second Edition. Chapter 42.
8. Grover, G., Zhu, S., Twilley, I.C. 1993. ‘’Dynamic Mechanical Properties of Carpet Yarns and Carpet Performance’’, Textile Research Journal, 63(5), 257-266.
9. Vangheluwe, L., Kiekens, P. 1997. ‘’Resilience Properties of Polypropylene Carpets’’, Textile Research Journal, 67(9), 671-676.
10. Laughlin, K.C., Cusick. G.E. 1968. ‘’Carpet Performance Evaluation’’, Textile Research Journal, 38(1), 78-80.
11. Önder, E., Berkalp, Ö.B. 2001. ‘’Effects of Different Structural Parameters on Carpet Physical Properties’’, Textile Research Journal, 71(6), 549-555.
12. Koç, E., Çelik, N., Tekin, M. 2005. ‘’An Experimental Study on Thickness Loss of Wilton-Type Carpets Produced with Different Pile Material after Prolonged Heavy Static Loading. Part-I: Characteristics Parameters and Carpet Behaviour’’, FIBRES & TEXTILES in Eastern Europe, 13(4), 56-62.
13. Koç, E., Çelik, N. 2007. ‘’An Experimental Study on Thickness Loss of Wilton-Type Carpets Produced with Different Pile Material after Prolonged Heavy Static Loading. Part-II: Characteristics Parameters and Carpet Behaviour’’, FIBRES & TEXTILES in Eastern Europe, 15(4), 87-92.
14. Çelik, N., Koç, E. 2010. ‘’Study on the Thickness Loss of Wilton-Type Carpets under Dynamic Loading’’, FIBRES & TEXTILES in Eastern Europe, 18(1), 54-58.
15. Korkmaz, Y., Koçer, S.D. 2010. ‘’Polipropilen Makine Halısı Üretim Parametrelerinin Halı Performansına Olan Etkileri’’, Tekstil Teknolojileri Elektronik Dergisi, 4(1), 48-58.
16. Özdil, N., Bozdoğan, F., Özçelik Kayseri, G., Süpüren Mengüç, G., 2012. ‘’Compressibility and Thickness Recovery Characteristic of Carpet’’, Tekstil ve Konfeksiyon, 3, 203-211.
17. Dayiary, M., Shaikhzadeh Najar, S., Shamsi, M. 2009. ‘’A New Theoretical Approach tu Cut-Pile Carpet Compression Based on Elastic-Stored Bending Energy’’. The Journal of the Textile Institute, 100(8), 688-694.
18. Dayiary, M., Shaikhzadeh Najar, S., Shamsi, M. 2010. ‘’An Experimental Verification of Cut-Pile Carpet Compression Behavior’’. The Journal of the Textile Institute, 101(6), 488-494.
19. Sarkeshick, S., Tavanai, H., Zarrebini, M., Morshed, M. 2009. ‘’An Investigation on the Effects of Heat-Setting Process on the Properties of Polypropylene Bulked Continuous Filament Yarns’’, The Journal of the Textile Institute, 100(2), 128-134.
20. Dadgar, M., Merati, A.A., Varkiyani, M.H. 2015. ‘’Evaluation of Heat Setting Parameters in Carpet Comfort’’, Fibers and Polymers, 16(5), 1169-1176.
21. Kebabcı, M., Babaarslan, O., Özkan Hacıoğulları, S., Telli, A. 2015. ‘’The Effect of Drawing Ratio and Cross-Sectional Shapes on the Properties of Polypropylene CF and BCF Yarns’’, Tekstil ve Mühendis Dergisi, 22(100), 46-53.
22. Erdoğan, Ü.H. 2012, ‘’Effect of Pile Fiber Cross Section Shape on Compression Properties of Polypropylene Carpets’’, The Journal of the Textile Institute, 103(12), 1369-1375.
23. Tavanai, H., Morshed, M., Hosseini, S.M. 2003. ‘’ Effect of On-Line Melt Blending of Polypropylene with Polyamide 6 on the Bulk and Strength of the Resulting BCF Yarn’’, Iranian Polymer Journal, 12(5), 421-430.

ISSN: 1300-3356
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi

Arşiv