___

• SEAOC Vision 2000, Performance based seismic engineering of buildings, Vols. I and II: Conceptual framework, Structural Engineers Association of California, Sacramento (CA), 1995.
• ATC 40, Seismic evaluation and retroŞt of existing concrete buildings, Applied Technology Council (ATC), Redwood City, California, 1996.
• FEMA 273, NEHRP Guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington DC, 1996.
• FEMA 356, NEHRP Guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington DC, 2000.
• ASCE/SEI 41-06, Seismic rehabilitation of existing buildings, American Society of Civil Engineers, Reston, Virginia, 2006.
• DBYBHY, Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik, 2007.
• Wallace J.W., Moehle J.P., Ductility and detailing requirements of bearing wall buildings, ASCE Journal of Structural Engineering, 118(6), 1625-1644, 1992.
• Park R., Paulay T., Reinforced Concrete Structures, John Wiley and Sons, New York,
• Wallace J .W., New methodology for seismic design of RC shear walls, ASCE Journal
• of Structural Engineering, 120(3), 863-884, 1994.
• Priestley M.J.N., Kowalsky M.J., Aspects of drift and ductility capacity of rectangular
• cantilever structural walls, Bull. N. Z. Natl. Soc. Earthquake Eng. 31( 2), 73—85,
• Sullivan T.J., Priestley M.J.N., Calvi G.M., Direct displacement-based design of
• frame-wall structures, Journal of Earthquake Engineering, 10(1), 2006.
• Priestley M.J.N., Seible F., Calvi G.M., Seismic design and retroŞt of bridges, Wiley,
• Mander J.B., Priestley M.J.N., Park R., Theoretical stress—strain model for conŞned
• concrete, Journal of Structural Engineering, 114(8), 1804—1826, 1988.
• Ghosh S.K., Markevicius V.P., Design of earthquake resistant shear walls to prevent
• shear failure”, Concrete Shear in Earthquake, Proceedings of the International
• Seneviratna G.D.P.K, Krawinkler H., Evaluation of inelastic MDOF effects for
• seismic design”, The John A. Blume Earthquake Engineering Center, Report No. 120,
• Amaris A., Dynamic ampliŞcation of seismic moments and shear forces in cantilever
• walls, Msc. Thesis, Rose School, Italy, 2002.
• Rutenberg A., Nsieri E., The seismic shear demand in ductile cantilever wall systems
• and the ECS Provisions, Bulletin of Earthquake Engineering, 4, 1-21, 2006.
• Lefas I.D., Kotsovos M.D., Ambrasseys N.N., Behavior of RC structural walls:
• strength, deformation characteristics and failure mechanism”, ACI Structural Journal,
• ANSYS® Academic Research, Release 11.
• Park R., Priestley M.J.N., Gill W.D., Ductility of square-conŞned concrete columns.
• J. Struct. Div. ST4, 108: 929—950, 1982.
• Saatcioglu M., Razvi S.R., Strength and ductility of confined concrete, Journal of
• Structural Engineering, 118(6), 1590—1607, 1992.
• Comite' Euro-International Du Beton (CEB), RC elements under cyclic loading
• state-of-the—art report, London, 1996.
• Dhakal R.P., Maekawa K., Modeling for postyield buckling of reinforcement, ASCE
• Journal of Structural Engineering, 128(9), 1139-1147, 2002.
• Thomsen J.H., Wallace J.W., Displacement-based design of reinforced concrete
• structural walls: an experimental investigation of walls with rectangular and T—shaped
• Kazaz 1., Gülkan P.,Yakut A., Deformation limits for structural walls with confined
• boundaries, Earthquake Spectra, 28(3), 1-28, 2012.