___

• [1] Weinert, K., Inasaki, I., Sutherland J.W., and Wakabayashi, T., (2004). Dry Machining and Minimum Quantity Lubrication. CIRP Annals, 53(2):511–537.
• [2] Öztürk, B., Küçük, Ö., Düzdar, İ., and Altınbilek, Y.S., (2017). Exploring the Economial Reasons of the Usage of Unhealthy & Low Resisting Far-east Products in the Water Pipe Systems, The Turkish Journal of Occupational/Environmental Medicine and Safety, 2(3):60-72.
• [3] Ingarao, G., Lorenzo D.R., and Micari, F., (2011). Sustainability Issues in Sheet Metal Forming Processes. An Overview. J. Clean. Prod. 19(4):337-347.
• [4] Düzdar, I., Kantoğlu, B., and Öztürk, B., (2017). A New Product Design After Benckmarking Analysis of Helis Gear Pumps and Optimization in Energy Consumption. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 6:610-617.
• [5] Balogun, V.A. and Mativenga, P.T., (2013). Modelling of Direct Energy Requirements in Mechanical Machining Processes. J. Clean. Prod., 41:179-186.
• [6] Bhushan, R.K., (2013). Optimization of Cutting Parameters for Minimizing Power Consumption and Maximizing Tool Life During Machining of Al Alloy SiC Particle Composites. J. Clean. Prod., 39:242-254.
• [7] Öztürk, B. ve Küçük, Ö., (2019). Bakır ve Pirinç Talaşı ile Takviye Edilmiş Boru Bağlantı Elemanlarının İki Farklı Üretim Türü İçin (SEC) Özel Enerji Tüketim Modeli. Politeknik Dergisi, DOI: 10.2339/politeknik.473105.
• [8] Hanafi, I., Khamlichi, A., Cabrera, F.M., Almansa, E., and Jabbouri, A., (2012). Optimization of Cutting Conditions for Sustainable Machining of PEEK-CF30 Using TiN Tools. J. Clean. Prod., 33:1-9.
• [9] Öztürk, B., Uğur, L., and Yildiz, A., (2019). Investigation of Effect on Energy Consumption of Surface Roughness in X-axis and Spindle Servo Motors in Slot Milling Operation, Measurement, 139:92-102, https://doi.org/10.1016/j.measurement.2019.02.009.
• [10] Mori, M., Fujishima, M., Inamasu, Y., and Oda, Y., (2011). A Study on Energy Efficiency Improvement for Machine Tools. CIRP Annals-Manufacturing Technology, 60:145–148.
• [11] Liu, N., Zhang, Y.F., and Lu, W.F., (2015). A Hybrid Approach to Energy Consumption Modelling Based on Cutting Power: A Milling Case. J. Clean. Prod., 104:264-272.
• [12] Negrete, C.C., (2013). Optimization of Cutting Parameters for Minimizing Energy Consumption in Turning of AISI 6061 T6 Using Taguchi Methodology and ANOVA. J. Clean. Prod., 53:195-203.
• [13] Oda, Y., Mori, M., Ogawa, K., Nishida, S., Fujishima, M., and Kawamura T., (2012). Study of Optimal Cutting Condition for Energy Efficiency Improvement in Ball end Milling with Tool-Workpiece Inclination CIRP Annals-Manufacturing Technology, 61:119–122.
• [14] Shokoohi, Y., Khosrojerdi, E., Shiadhi, R., (2015). Machining and Ecological Effects of a New Developed Cutting Fluid in Combination with Different Cooling Techniques on Turning Operation. Journal of Cleaner Production, 94:330-339.
• [15] Yurdakul, M., (2015). Effect of Cutting Parameters on Consumed Power in İndustrial Granite Cutting Processes Performed with The Multi-Disc Block Cutter. International Journal of Rock Mechanics & Mining Sciences, 76:104–111.
• [16] Neugebauer, R., Schubert, A., Reichmann, B., and Dix, M., (2011). Influence Exerted by Tool Properties on the Energy Efficiency During Drilling and Turning Operations. CIRP Journal of Manufacturing Science and Technology, 4:161–169.
• [17] Escalona, P.M., Shokrani, A., Newman, S.T., (2015). Influence of Cutting Environments on Surface Integrity and Power Consumption of Austenitic Stainless Steel. Robotics and Computer-Integrated Manufacturing, 36:60–69.
• [18] Nas, E. And Öztürk, B., (2018). Optimization of Surface Roughness via the Taguchi Method and Investigation of Energy Consumption when Milling Spheroidal Graphite cast Iron Materials. Materials Testing For Production Technologies, 60(5):519-524.
• [19] Liu, N., Wang, S.B., Zhang, Y.F., and Lu, W.F., (2016). A novel Approach to Predicting Surface Roughness Based on Specific Cutting Energy Consumption When Slot Milling Al-7075. International Journal of Mechanical Sciences, 118:13–20.
• [20] Küçük, Ö., Öztürk, B., Altınbilek, Y.S. ve Elfarah, T.T.K., 2017. Şehir Su Şebekesi Tesisat Boru Bağlantı Elemanlarının Akışkan Analizine Bağlı Basınç Dayanım Analizinin Yapılması. Kastamonu University Journal of Engineering and Sciences 3(1):32-43.
• [21] Öztürk, B., Öktem, H., Said, G., Çetindağ, H.A., and Erzincanlı, F., (2016). Investigation of Cooling Rate on Hardness and Microstructure in Casting Fittings Materials. Published in 4th International Symposium on Innovative Technologies in Engineering and Science 3-5, November 2016 (ISITES2016 Alanya/Antalya-Turkey), 1279-128.
• [22] Öktem, H., Öztürk, B., and Akincioğlu, S., (2017). Investigation of Energy Consumption on Thread Machining of Austempered Ductile Cast Iron Materials. 5th International Conference and Exhibition on Mechanical & Aerospace Engineering, DOI: 10.4172/2168-9792-C1-01, October 02-04, Las Vegas, USA.
• [23] Korloy, (2018). Korloy Kesici Takım Teknik Özellikler Katoloğu.
• [24] Fanuc, (2012). Fanuc 1000 CNC Kullanıcı Rehberi.
• [25] Entes, (2018). Entes Akım Trafosu Ve Ampermetreler Teknik Özellikler Katoloğu.