Modelling Indoor Environmental Conditions in a Commercial Broiler House

Turkey’s poultry industry has experienced significant growth in recent years, resulting in the construction of many new production facilities. It is important to maintain optimum environmental conditions for a profitable production. In this study, temperature, relative humidity and air velocity distribution inside a broiler house were analysed. Computational Fluid Dynamics (CFD) simulations (numerical method) and direct measurements (experimental method) were usedto determine the appropriate indoor environmental conditions. Simulated values were validated by comparison with the measured values using the normalised mean square error (NMSE). The measured and predicted parameters of temperature, relative humidity and air velocity at birds’ height, human height, and roof height upon comparison gave average NMSE values of 0.139, 0.181 and 0.090, respectively. The results showed a good agreement between simulated and measured values as obtained NMSE values were less than 0.25. In conclusion, CFD simulation can be used as an alternative method for the analysis of poultry house indoor environment. A better understanding of indoor environment conditions in poultry house provides useful information for manufacturers and end users for better management decisions.

PDF

___

ASHRAE (2009). Fundamentals, SI ed. American Society of Heating, Refrigerating and Air Conditioning Engineers. Atlanta, GA, USA
ASTM (2002). Standard guide (D5157-97) for statistical evaluation of indoor air quality models. ASTM, West Conshohocken, Pa
Awbi H B (2003). Ventilation Systems, Design and Performance. Taylor & Francis, London and New York, pp. 1-464
Bates P D, Lane S N & Ferguson R I (2005). Computational Fluid Dynamics: Applications in Environmental Hydraulics. John Wiley & Sons Ltd, West Sussex, pp. 1-540
Blanes-Vidal V, Guijarro E, Balasch S & Torres A (2008). Application of computational fluid dynamics to the prediction of airflow in a mechanically ventilated commercial poultry building. Biosystems Engineering 100(1): 105-116
Bustamante E, García Diego F J, Calvet S, Estellés F, Beltrán P, Hospitaler A & Torres A G (2013). Exploring ventilation efficiency in poultry buildings: The validation of computational fluid dynamics (CFD) in a cross-mechanically ventilated broiler farm. Energies 6(5): 2605-2623
Bustamante E, García Diego F J, Calvet S, Torres A G & Hospitaler A (2015). Measurement and numerical simulation of air velocity in a tunnel-ventilated broiler house. Sustainability 7(2): 2066-2085
CIGR (2002). Heat and moisture production at animal and house level, in: S. Pedersen, K. Sallvik (Eds.) 4th Report of Working Group on Climatization of Animal Houses, Danish Institute of Agricultural Sciences, Horsens, Denmark, pp. 12-13
Deep A, Schwean Lardner K, Crowe T, Fancher B & Classen H (2010). Effect of light intensity on broiler production, processing characteristics, and welfare. Poultry Science 89(11): 2326-2333
Dozier W, Lott B & Branton S (2005). Growth responses of male broilers subjected to increasing air velocities at high ambient temperatures and a high dew point. Poultry Science 84(6): 962-966
Eymard R, Gallouët T & Herbin R (2000). Finite volume methods. Handbook of Numerical Analysis 7: 713- 1018
Furlan R L, Macari M, Secato E, Guerreiro J & Malheiros E (2000). Air velocity and exposure time to ventilation affect body surface and rectal temperature of broiler chickens. The Journal of Applied Poultry Research 9(1): 1-5
Launder B E & Spalding D (1974). The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering 3(2): 269-289
Leeson S & Summers J D (2010). Broiler Breeder Production. Nottingham University Press, Ontario, pp. 1-22
Lindley J A & Whitaker J H (1996). Agricultural Buildings and Structures. American Society of Agricultural Engineers (ASAE), St Joseph, pp. 565-591
Reece F & Lott B (1982). Heat and moisture production of broiler chickens during brooding. Poultry Science 61(4): 661-666
Rojano F, Bournet P E, Hassouna M, Robin P, Kacira M & Choi C Y (2015). Modelling heat and mass transfer of a broiler house using computational fluid dynamics. Biosystems Engineering 136: 25-38 Saraz J A O, Martins M A, Marin O L Z, Damasceno F A & Velasquez H J C (2012). A review about the use of computational fluid dynamics (CFD) in broiler house. Dyna-Colombia 79(175): 142-149
Song D & King A (2015). Effects of heat stress on broiler meat quality. World’s Poultry Science Journal 71(4): 701-709
USDA (2016). Livestocks and poultry: World markets and trade, United States Department of Agriculture, Foreign agricultural service. In: F. A. S. United States Department of Agriculture (Ed.), Washington, DC, USA, pp. 17-18
Versteeg H K & Malalasekera W (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume Method. Pearson Education, London, pp. 9-38.
Vizzier Thaxton Y, Christensen K D, Mench J A, Rumley E R, Daugherty C, Feinberg B, Parker M, Siegel P & Scanes C G (2016). Symposium: Animal welfare challenges for today and tomorrow. Poultry Science 95(9): 2198-2207
Wheeler E F & Bottcher R (1995). Evaluating mechanical ventilation systems. G-82 Fact Sheet. The Pennsylvania State University, Agricultural and Biological Engineering Department, University Park. State College, pp. 1-3
Winn P N & Godfrey E F (1967). The effect of humidity on growth and feed conversion of broiler chickens. International Journal of Biometeorology 11(1): 39-50
Xin H, Berry I L, Tabler G T & Barton T L (1994). Temperature and humidity profiles of broiler houses with experimental conventional and tunnel ventilation systems. Applied Engineering in Agriculture 10(4): 535-542
Xiong Y, Meng Q S, Gao J, Tang X F & Zhang H F (2017). Effects of relative humidity on animal health and welfare. Journal of Integrative Agriculture 16(8): 1653-1658