___

• [1] 23.Universiade 2005, İZMİR, İBB 2002 Faaliyet Raporu, https://www.izmir.bel.tr/YuklenenDosyalar/Dokumanlar/25.12.2013%2011_06_28_universiade.pdf (Erişim: 21.06.2017)
• [2] 23.Universiade 2005, İZMİR, İBB 2005 İBB Faaliyet Raporu, https://www.izmir.bel.tr/YuklenenDosyalar/Dokumanlar/25.12.2013%2016_36_34_universiade.pdf (Erişim: 21.06.2017)
• [3] Wang W., Reverse Engineering Technology of Reinvention. NW Washington, USA, CRC press Taylor & Francis Group, 2011.
• [4] Várady T, Martin RR, Cox J. “Reverse Engineering of Geometric Models—an Introduction”. Computer Aided Design, 29(4), 255–268, 1997.
• [5] Önçağ A.Ç, Tekcan Ç., Özden H., 2017, Mekanik Parçaların Tersine Mühendislik ile Modellenmesinin Değerlendirilmesi ve Bir Uygulama, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, (Baskıda-accepted)
• [6] Yang, Z., ve Chen, Y., 2005, A reverse engineering method based on haptic volume removing, Computer – Aided Design, 37(1):45-54p.
• [7] Lee K.H., and Woo, H., 1998, Use of reverse engineering method for rapid product development, Computers & Industrial Engineering, 35(1-2):21-24p.
• [8] Balta, C. ve Öztürk, S., 2009, Tersine mühendislikte laser tarama nokta bulutundan örme yüzey elde edilmesi, Elektrik-Elektronik-Bilgisayar ve Biyomedikal Mühendisliği 13. Ulusal Kongre, EMO-ODTÜ, http://akademikpersonel.kocaeli.edu.tr/cengizbalta/poster/cengizbalta20.12.2009_21.59.40poster.pdf (Erişim tarihi:31 Mayıs 2016)
• [9] Mian, S.H., Mannan, A.M., Al-Ahmari, A.M., 2013, Multi-sensor integrated system for reverse engineering, Procedia Engineering, 64:518–527p.
• [10] Dúbravčík, M., and Kender, S., 2012, Application of reverse engineering techniques in mechanics system services, Procedia Engineering, 48:96–104p.
• [11] Paulic, M., Irgolic, T., Balic, J., Cus, F., Cupar, A., Brajlih, T. and Drstvensek, I., 2014, Reverse engineering of parts with optical scanning and additive manufacturing, Procedia Engineering, 69:795– 803p.
• [12] Zhou, M., 2011, A new approach of composite surface reconstruction based on reverse engineering, Procedia Engineering, 23:594–599p.
• [13] Sansoni, G. and Docchio, F., 2004, Three-dimensional optical measurements and reverse engineering for automotive applications, Robotics and Computer-Integrated Manufacturing, 20(5):359–367p.
• [14] Xu, L., Lin, M., Li, J., Wang, Z. and Chirende, B., 2008, Three-dimensional geometrical modelling of wild boar head by reverse engineering technology, Journal of Bionic Engineering, 5(1):85−90p.
• [15] Ören, S., Yasa, E., Uğur, E., Poyraz, Ö., Akbulut, G. ve Pilatin, S., 2014, Havacılık sektöründe optik ölçüm yöntemlerinin yeri ve karşılaştırmalı değerlendirilmesi üzerine bir çalışma, Mühendis ve Makina, 55(654):35-60s.
• [16] Melvin J. Wachowiak & Basiliki Vicky Karas, 2009, 3d Scanning and Replication for Museum and Cultural Heritage Applications, Volume 48, Issue 2, 141-158p.
• [17] Naif Adel Haddad, 2011, From ground surveying to 3D laser scanner: A review of techniques used for spatial documentation of historic sites, Journal of King Saud University – Engineering Sciences 23, 109–118p.
• [18] Yastikli N., 2007, Documentation of cultural heritage using digital photogrammetry and laser scanning, Journal of Cultural Heritage, 8(4), 423-427p.
• [19] Segreto T., Bottillo A., Teti R., Galantucci L.M., Lavecchia F., Galantucci M.B., 2017, Non-contact reverse engineering modeling for additive manufacturing of down scaled cultural artefacts, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '16, Procedia CIRP, 62, 481-486p.
• [20] Pavlidis G., Koutsoudis A., Arnaoutoglou F., Tsioukas V., Chamzas C., 2007, Methods for 3D digitization of Cultural Heritage, Journal of Cultural Heritage, 8(1), 93-98p.
• [21] Thingiverse, https://www.thingiverse.com/met/about (Erişim: 02.08.2017)
• [22] Hexagon, “HP-L.8.9 Lazer tarayıcı” http://www.hexagonmetrology.com.tr/HP-L-89- LazerTarayici_1669.htm#.VzWQkYSLRqM (Erişim: 13.05.2016).