___

[1] Yan, J., and Li, L., (2013) Multi-objective optimization of milling parameters–the trade-offs between energy, production rate and cutting quality, Journal of Cleaner Production, 52, 462-471.

[2] Saini, S., Ahuja, I. S., and Sharma, V. S., (2012) Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools, International Journal of Precision Engineering and Manufacturing, 13(8), 1295-1302.

[3] Kurt, M., Hortomacıoğlu, S., Mutlu, B., and Köklü, U., (2012) Minimization of the surface roughness and form error on the milling of free-form surfaces using a grey relational analysis, Materiali in Tehnologije / Materials and Technology, 46(3), 205-213.

[4] Lazoglu, I., Manav, C., and Murtezaoglu, Y., (2009) Tool path optimization for free form surface machining, CIRPAnnals-Manufacturing Technology, 58(1), 101-104.

[5] Mohri, N., Saito, N., Higashi, M., and Kinoshita, N., (1991) A new process of finish machining on free surface by EDM methods, CIRP Annals-Manufacturing Technology, 40(1), 207-210.

[6] Rashid, W. B., Goel, S., Davim, J. P., and Joshi, S. N.,(2016) Parametric design optimization of hard turning of AISI 4340 steel (69 HRC), The International Journal of Advanced Manufacturing Technology, 82(1-4), 451-462.

[7] Gupta, M., and Kumar, S., (2015) Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method, Engineering Science and Technology, an International Journal, 18(1), 70-81.

[8] Risbood, K. A., Dixit, U. S., and Sahasrabudhe, A. D., (2003) Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process, Journal of Materials Processing Technology, 132(1), 203-214.

[9] Shi, K., Zhang, D., Ren, J., Yao, C., and Huang, X., (2016) Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with carbide tool, Advances in Mechanical Engineering, 8(1), 168-179.

[10] Gok, A., (2015) A new approach to minimization of the surface roughness and cutting force via fuzzy TOPSIS, multi-objective grey design and RSA, Measurement, 70, 100-109.

[11] Yang, J. L., and Chen, J. C., (2001) A systematic approach for identifying optimum surface roughness performance in end-milling operations, Journal of industrial technology, 17(2), 1-8.

[12] Ulas, H. B., (2014) Experimental determination of cutting forces and surface roughness when turning 50CrV4 steel (SAE 6150) and modelling with the artificial neural network approach. Transactions of the Indian Institute of Metals, 67(6), 869-879.

[13] Krishankant, J. T., Bector, M., and Kumar, R., (2012) Application of Taguchi method for optimizing turning process by the effects of machining parameters, International Journal of Engineering and Advanced Technology, 2(1), 263-274.

[14] Yaka, H., Uğur, L., and Akkuş, H., (2016) AISI 1040 Çeliğinin Tornalanmasında Yüzey Pürüzlülüğünün Çoklu Regresyon ile İncelenmesi, Afyon Kocatepe University Journal of Science and Engineering, 16(3), 770-775.

[15] Göçer, H., Çirakli, A., Uğur, L., Yildiz, A., and Karadeniz, S., (2017) Determination of the most appropriate surgical treatment in syndesmotic injury of ankle joint: Application of Taguchi method, Mechanika, 23(1), 138-145.

[16] Samtaş, G., (2015) Optimisation of cutting parameters during the face milling of AA5083-H111 with coated and uncoated inserts using Taguchi method, International Journal of Machining and Machinability of Materials, 17(3-4), 211-232.

[17] Said, M. S., Ghani, J. A., Selamat, M. A., Wan, N. N. I., and Che, H. C., (2016) Optimisation of End Milling Machining Parameters Using the Taguchi Method and ANOVA of AlSi/AlN Metal Matrix Composite Material, In Key Engineering Materials, 701, 200-204.

[18] Yaka, H., Akkuş, H., and Uğur, L., (2016) AISI 1040 Çeliğininin Tornalamasında Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin Taguchi Metodu İle Optimizasyonu, Celal Bayar University Journal of Science, 12(2), 283-288.