INVESTIGATION OF THE EFFECT OF THE LASER WELDING PARAMETERS CHANGE ON WELDING SEAM FOR STAINLESS STEEL
Laser welding is a special method and also still developing. Melting of materials is based on the principle that high-energy rays are used in the merge. High-energy rays reflected on a combined material at any desired ratio and successful welding process can be performed. Low heat input with narrow HAZ region, the possibility of low distortion, deep penetration and high strength due to the properties of choice laser welding in the automotive industry is of great importance. In this study, the effect of the geometry on the seam of laser welding parameters of high alloy stainless steel used in the automotive industry were investigated.
Keywords:
Laser welding, stainless steel, welding parameters seam geometry,
___
- [1] Benyounis, K.Y.,Olabi, A.G., Hashmi, M.S.J., “Effect of laser welding parameters on the heating put and weld-bead profile”, Journal of Materials Processing Technology, 164: 978-985, 2005.
- [2] Benyounis, K. Y., Olabi A. G. and Hashmi, M. S. J., “Effect of Laser Welding Parameters on The Heat Input and Weld-Bead Profile”, Journal of Materials Processing Technology, V 164-165, pp: 978-985, 2005.
- [3] Ion, C.2005. Laser Processing of Engineering Materials, Elsevier Butterworth-Heinemann, MA-ABD.
- [4] Jokinen, T.2004. Novel Ways Of Using Nd: YAG Laser Welding Thick Section Austenitic Stainless Steel, VTT Publications, Lappeenranta, Finlandiya.
- [5] Kaluç, E., Taban, E., “Alüminyum ve Alüminyum Alaşımlarının TIG Kaynağı”, Makine Tek, Sayı. 103- 104, Sayfa. 122-126, Mayıs-Haziran 2006.
- [6] Keskin, M.S, “Östenitik Paslanmaz Çeliğin Lazer Kaynağı Yöntemiyle Birleştirilmesinin İncelenmesi”, 5. Uluslararası ileri Teknolojiler Sempozyumu (IATS’09), 13-15 Mayıs 2009, Karabük, Türkiye.
- [7] Lazer Kaynak Yöntemi ve Uygulamaları, Gökay Püskülcü Mak Y Müh LazerTek Tasarım Ltd Şti , İYTE Kampüsü Urla İzmir, Fikret Koçlular Mak Müh LazerTek Tasarım Ltd Şti İYTE Kampüsü Urla İzmir, Mühendis ve Makine Cilt 50 Sayı 599.
- [8] Malek, G.. F., Sheikhi, M., Torkamany, M.J., Sabbaghzadeh, J. 2009. The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminum alloy, Materials Science and Engineering A, A(159), 167-171.
- [9] Odabaş C, “Paslanmaz Çeliklerin Kaynağı”, Askaynak, 62-63, 2007.
- [10] Uzun, R.O, Keleş,Ö, “Lazerle Kaynak İşleminde Kaynak Parametrelerinin Kaynak Kalitesi Üzerindeki Etkilerinin İncelenmesi”, Gazi Üniv. Müh. Mim. Fak. Der. Journal of the Faculty of Engineering and Architecture of Gazi University Cilt 27, No 3, 509-517, 2012 Vol 27, No 3, 509-517, 2012.
- [11] Yılbaş, B.S., Arif, A.F.M., AbdulAleem, B.J., “Laser welding of low carbon steel and thermal stress analysis”, Optics & Laser Technology, 42 (5):760-768, 2009.
- [12] Spektroskopi [Internet], Vikipedi özgür ansiklopedi. Available from; http://tr.wikipedia.org/wiki/Spektroskopi. [Erişim tarihi; 20.08.2013].
- ISSN: 1304-7191
- Yayın Aralığı: Yılda 4 Sayı
- Yayıncı: Yıldız Teknik Üniversitesi