20731

SYSTEMATIC LITERATURE REVIEW FOR LEAN PRODUCT DEVELOPMENT PRINCIPLES AND TOOLS

Lean thinking, today, has impacted not only manufacturing but also many other areas such as logistics, healthcare, accounting and product development. Among these, product development possess highest potential impact on an organizations’ success and survival. The topic of this study is lean product development which can be expressed as application of lean tools and basic principles to the field of product development to eliminate waste and establish flow. Lean product development will be discussed based on Toyota Product Development Principles and a systematic review of these principles will be provided. All peer-reviewed publications within reach, plus a set of selected conference proceedings and dissertations are analyzed and any piece of evidence that argues any lean product development principle is reported through a systematic review. In addition to principles, systematic review is also performed for selected lean product development tools. Based on findings, a list of possible research areas are provided that may function road map for researchers.

Keywords:

Product development lean thinking, literature review,

PDF

___

[1] J. P. Womack, D. T. Jones, and D. Roos, The machine that changed the world: the story of lean production: Toyota’s secret weapon in the global car wars that is revolutionizing world industry. New York: Free Press, 1990.
[2] J. Krafcik, “Triumph of the lean production system,” Sloan Manage. Rev., vol. 30, no. 1, pp. 41–52, 1988.
[3] J. P. Womack and D. T. Jones, Lean thinking: banish waste and create wealth in your corporation. New York: Free Press, 2003.
[4] E. B. Magrab, S. K. Gupta, F. P. Mccluskey, and P. A. Sandborn, Integrated Product and Process Design and Development The Product Realization Process. Washington: CRC Press, 2010.
[5] J. Priest and J. Sanchez, Product Development and Design for Manufacturing: A Collaborative Approach to Producibility and Reliability, Second Edition,. Taylor & Francis, 2001.
[6] N. P. Suh, Axiomatic Design: Advances and Applications. Oxford University Press, 2001.
[7] J. M. Morgan and J. K. Liker, The Toyota product development system: integrating people, process, and technology. New York: Productivity Press, 2006.
[8] T. Baines, H. Lightfoot, G. M. Williams, and R. Greenough, “State-of-the-art in lean design engineering: a literature review on white collar lean,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., vol. 220, no. 9, pp. 1539– 1547, Jan. 2006.
[9] H. Mcmanus, A. Haggerty, and E. Murman, “Lean Engineering: Doing the Right Thing Right,” in 1st International Conference on Innovation and Integration in Aerospace Sciences, 2005, no. August, pp. 1–10.
[10] J. Pernstål, R. Feldt, and T. Gorschek, “The Lean Gap: A Review of Lean Approaches to Large-Scale Software Systems Development,” J. Syst. Softw., Jun. 2013.
[11] G. Johansson and E. Sundin, “Lean and green product development: two sides of the same coin?,” J. Clean. Prod., vol. 85, pp. 104–121, 2014.
[12] J. Hoppmann, E. Rebentisch, U. Dombrowski, and T. Zahn, “A Framework for Organizing Lean Product Development,” Eng. Manag. J., vol. 23, no. 1, pp. 3–16, 2011.
[13] M. S. Khan, A. Al-Ashaab, E. Shehab, B. Haque, P. Ewers, M. Sorli, and A. Sopelana, “Towards lean product and process development,” Int. J. Comput. Integr. Manuf., no. August 2013, pp. 1–12, Oct. 2011.
[14] H. C. M. Leon and J. A. Farris, “Lean Product Development Research: Current State and Future Directions,” Eng. Manag. J., vol. 23, no. 1, pp. 29–52, 2011.
[15] J. K. Liker and J. M. Morgan, “The Toyota Way in Services: The Case of Lean Product Development,” Acad. Manag. Perspect., vol. 20, no. 2, pp. 5–20, 2006.
[16] J. K. Liker and J. Morgan, “Lean Product Development as a System: A Case Study of Body and Stamping Development at Ford,” Eng. Manag. J., vol. 23, no. 1, pp. 16–28, 2011.
[17] B. W. Oppenheim, “Lean product development flow,” Syst. Eng., vol. 7, no. 4, pp. 352–376, 2004.
[18] H. McManus and R. L. Millard, “Value Stream Analysis and Mapping for Product Development,” in Proceedings of the International Council on Aeronautical Sciences (ICAS) Congress, 2002, pp. 6103.1 – 6103.10.
[19] A. Al-ashaab, E. Shehab, R. Alam, A. Sopelanad, M. Sorli, M. Flores, D. Stokic, and M. James-Moore, “The Conceptual LeanPPD Model,” in International Conference on Concurrent Engineering, 2010, pp. 339–346.
[20] N. Gautam and N. Singh, “Lean product development: Maximizing the customer perceived value through design change (redesign),” Int. J. Prod. Econ., vol. 114, no. 1, pp. 313–332, Jul. 2008.
[21] C. Karlsson and P. Åhlström, “The difficult path to lean product development,” J. Prod. Innov. Manag., vol. 13, no. 4, pp. 283–295, 1996.
[22] T. R. Browning, “Value-based product development: refocusing lean,” in Proceedings of the 2000 IEEE, 2000, pp. 168–172.
[23] J. Freire and L. F. Alarco, “Achieving Lean Design Process: Improvement Methodology,” J. Constr. Eng. Manag., vol. 128, no. 3, pp. 248–256, 2002.
[24] A. Schulze and T. Störmer, “Lean product development – enabling management factors for waste elimination,” Int. J. Technol. Manag., vol. 57, no. 1, pp. 71–91, 2012.
[25] V. Mandic, M. Oivo, P. Rodriguez, P. Kuvaja, H. Kaikkonen, and B. Turhan, “What Is Flowing in Lean Software Development?,” in Lean Entreprise Software and Systems, 2010, pp. 72–84.
[26] T. Ohno, Toyota production system: beyond large-scale production. Portland: Productivity Press, 1988.
[27] C. Bauch, “Lean Product Development: Making waste transparent,” Massachusetts Institute of Technology, Technical University of Munich, 2004.
[28] J. Oehmen and E. Rebentisch, “Risk Management in Lean PD,” 2010.
[29] O. Possamai and P. S. Ceryno, “Lean approach applied to product development,” Prod. Manag. Dev., vol. 6, no. 2, pp. 157–165, 2008.
[30] D. Reinertsen, “Let it flow,” Ind. Eng., vol. 37, no. 6, pp. 40–45, 2005.
[31] K. Mahlamäki, M. Ström, T. Eisto, and V. Hölttä, “Lean Product Development Point of View to Current Challenges of Engineering Change Management in Traditional Manufacturing Industries,” in Proceedings of International Conference of Concurrent Enterprising., 2009, pp. 22–24.
[32] G. Letens, J. A. Farris, and E. M. Van Aken, “A Multilevel Framework for Lean Product Development System Design,” Eng. Manag. J., vol. 23, no. 1, pp. 69–86, 2011.
[33] B. Haque and M. J. Moore, “Measures of performance for lean product introduction in the aerospace industry,” Proc. Inst. Mech. Eng. J. Eng. Manuf., vol. 218, no. 10, pp. 1387–1398, Jan. 2004.
[34] M. Graebsch, W. P. Seering, and U. Lindemann, “Assessing information waste in lean product development,” in International Conference on Engineering Design, 2007, no. August, pp. 1–12.
[35] J. P. Chase, “Value creation in the product development process,” Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2001.
[36] H. McManus, Product Development Value Stream Mapping (PDVSM) Manual, no. September. Cambridge, MA: MIT Lean Aerospace Initiative, 2005.
[37] H. Qudrat-Ullah, B. S. Seong, and B. L. Mills, “Improving high variable-low volume operations: an exploration into the lean product development,” Int. J. Technol. Manag., vol. 57, no. 1, pp. 49–70, 2012.
[38] A. C. Ward, D. K. Sobek, and J. Shook, Lean Product and Process Development, 2nd editio. Lean Enterprise Institute, 2014.
[39] A. Ward and W. Seering, “Quantitative Inference in a Mechanical Design ‘Compiler,’” J. Mech. Des., vol. 115, no. 1, pp. 29–35, 1993.
[40] A. C. Ward, J. K. Liker, J. J. Cristiano, and D. K. Sobek, “The second Toyota paradox: How delaying decisions can make better cars faster,” Sloan Manage. Rev., no. April, pp. 43–61, 1995.
[41] S. M. Bresnahan, “Understanding and Managing Uncertainty in Lean Aerospace Product Development,” Massachusetts Institute of Technology, 2006.
[42] R. Sacks and M. Goldin, “Lean Management Model for Construction of High-Rise Apartment Buildings,” J. Constr. Eng. Manag., no. 133, pp. 374–384, 2007.
[43] D. Raudberget, “Practical Applications of Set-Based Concurrent Engineering in Industry,” J. Mech. Eng., vol. 56, no. 11, pp. 685–695, 2010.
[44] A. M. Belay, T. Welo, and P. Helo, “Approaching lean product development using system dynamics: investigating front-load effects,” Adv. Manuf., vol. 2, no. 2, pp. 130–140, May 2014.
[45] A. Wasim, E. Shehab, H. Abdalla, A. Al-Ashaab, R. Sulowski, and R. Alam, “An innovative cost mobeyaodelling system to support lean product and process development,” Int. J. Adv. Manuf. Technol., vol. 65, no. 1–4, pp. 165–181, Apr. 2012.
[46] B. Haque, “Lean engineering in the aerospace industry,” in Proceedings of the Institution of Mechanical Engineers, 2003, vol. 217, no. 10, pp. 1409–1420.
[47] P. Middleton and D. Joyce, “Lean Software Management: BBC Worldwide Case Study,” IEEE Trans. Eng. Manag., vol. 59, no. 1, pp. 20–32, 2010.
[48] B. P. Nepal, O. P. Yadav, and R. Solanki, “Improving the NPD Process by Applying Lean Principles: A Case Study,” Eng. Manag. J., vol. 23, no. 1, pp. 52–68, 2011.
[49] J. Cleveland, “Toyota’ s Other System-This One for Product Develpoment,” Automot. Desing Prod., vol. 118, no. 2, pp. 18–22, 2006.
[50] D. K. Sobek, A. C. Ward, and J. K. Liker, “Toyota ’ s Principles of Set-Based Concurrent Engineering,” Sloan Manage. Rev., vol. 40, no. 2, pp. 67 – 83, 1999.
[51] T. M. Barnhart, Creating a Lean R&D System: Lean Principles and Approaches for Pharmaceutical and Research-Based Organizations. Taylor & Francis, 2012.
[52] K. Radeka and T. Sutton, “What is ‘lean’ about product development?,” PDMA Visions, vol. Vol. XXXI, no. 2, pp. 11–15, 2007.
[53] P. G. Smith, Flexible Product Development Markets. California: Jossey- Bass, 2007.
[54] Tilin, A. (2005) The Smartest Company of the Year [Internet]. Available from: http://money.cnn.com/magazines/business2/business2_archive/2005/01/01/8250213/index.htm. [Accessed: 18-Jan-2015].
[55] L. Wang, X. G. Ming, F. B. Kong, D. Li, and P. P. Wang, “Focus on implementation: a framework for lean product development,” J. Manuf. Technol. Manag., vol. 23, no. 1, pp. 4–24, 2012.
[56] J. K. Liker, The Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer. New York: McGraw-Hill, 2004.
[57] L. Lindlöf, B. Söderberg, and M. Persson, “Practices supporting knowledge transfer – an analysis of lean product development,” Int. J. Comput. Integr. Manuf., no. August 2013, pp. 1–8, Jan. 2012.
[58] B. Haque and M. James-moore, “Applying lean thinking to new product introduction,” J. Eng. Des., vol. 15, no. 1, pp. 1–31, Feb. 2004.
[59] G. Ringen and H. Holtskog, “How enablers for lean product development motivate engineers,” Int. J. Comput. Integr. Manuf., no. August 2013, pp. 1–11, Jul. 2011.
[60] P. Middleton, A. Flaxel, and A. Cookson, “Lean Software Management Case Study: Timberline Inc,” in Extreme Programming and Agile Processes in Software Engineering, 2005, 3556th ed., pp. 1–9.
[61] G. Schuh, M. Lenders, and M. Rauhut, “Lean Innovation – Introducing takt time to product development processes,” in Advances in Production Management Systems, 2010, pp. 51–60.
[62] T. Horikiri, D. Kieffer, and T. Tanaka, “Oobeya – Next Generation of Fast in Product Development,” System. QV Systems, 2008.
[63] T. Tanaka and S. Tanner, “The Visualization of Purpose: Quickening the Pace of Executive Achievement Through The Visualization of Purpose,” Quality, no. June. 2011.
[64] B. J. Barnett, “Room with a view,” Boeing Front., vol. 8, no. 5, pp. 38–39, 2009.
[65] D. K. Sobek and A. Smalley, Understanding A3 Thinking: A Critical Component of Toyota’s PDCA Management System. CRC Press, 2011.
[66] M. Rother and J. Shook, Learning to see: value stream mapping to create value and eliminate muda. Massachusetts: Lean Enterprise Institute, 2003.
[67] S. Tyagi, A. Choudhary, X. Cai, and K. Yang, “Value stream mapping to reduce the lead-time of a product development process,” Int. J. Prod. Econ, no. 160, pp. 202–212, 2015.
[68] C. Fiore, Accelerated product development: combining lean and Six sigma for peak performance. New York: Productivity Press, 2005.
[69] I. Fritzell and G. Göransson, “Value stream mapping in product development,” Chalmers University of Technology, 2012.
[70] A. Gurumurthy and R. Kodali, “Design of lean manufacturing systems using value stream mapping with simulation: A case study,” J. Manuf. Technol. Manag., vol. 22, no. 4, pp. 444–473, 2011.
[71] D. V Steward, “The Design Structure System: A Method for Managing the Design of Complex Systems,” IEEE Trans. Eng. Manag., vol. EM-28, no. 3, pp. 71–74, 1981.
[72] T. R. Browning, “Applying the Design Structure Matrix to System Decomposition and Integration Problems: A Review and New Directions,” Engineering, vol. 48, no. 3, pp. 292–306, 2001.
[73] C. Martínez, “A Coordination Mechanism for Lean Product Development,” in Proceedings of the 2010 Industrial Engineering Research Conference, 2010, pp. 1–7.
[74] W. J. Hopp and M. L. Spearman, Factory Physics. McGraw-Hill, 2011.
[75] J. D. C. Little and S. C. Graves, “Little’s Law,” in Building Intuition: Insights From Basic Operations Management Models and Principles, D. Chhajed and T. J. Lowe, Eds. Springer, 2008, pp. 81–100.
[76] M. S. Dude, “10 kanban boards and their context,” pp. 1–25, 2013.
[77] D. J. Anderson, Kanban. Washington: Blue Hole, 2010.
[78] Klipp, P (2012) Getting Started with Kanban [Internet] LeanPub. Available: https://kanbanery.com/ebook/GettingStartedWithKanban.pdf. [Accessed: 18-Jan-2015].
[79] Oostvogels, N. (2012) Kanban for Skeptics [Internet] LeanPub. Available: https://leanpub.com/kanbanforskeptics. [Accessed: 18-Jan-2015].
[80] M. Ikonen, “Lean Thinking in Software Development: Impacts of Kanban on Projects,” 2011.
[81] J. Oehmen and E. Rebentisch, “Waste in Lean Product Development,” Lean Adv. Initiat. Pap. Ser., no. July, pp. 1–35, 2010.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv